Determination of deformation and failure properties of ductile materials by means of the small punch test and neural networks

[1]  E. Fleury,et al.  Small punch tests to estimate the mechanical properties of steels for steam power plant: I. Mechanical strength , 1998 .

[2]  Otto K. Harling,et al.  The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties , 1981 .

[3]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[4]  A. Sinclair,et al.  Assessment of Fracture Toughness by a Punch Test with Miniature Specimens , 1993 .

[5]  Shiro Jitsukawa,et al.  Methods and Devices for Small Specimen Testing at the Japan Atomic Energy Research Institute , 1993 .

[6]  J. Kameda,et al.  Small-punch technique for measurement of material degradation of irradiated ferritic alloys , 1991 .

[7]  Ziqiang Zhao,et al.  A Modified Miniature Disk Test for Determining Material Mechanical Properties , 1995 .

[8]  Jun-Hwa Hong,et al.  Evaluation of irradiation effects of 16 MeV proton-irradiated 12Cr1MoV steel by small punch(SP) tests , 1994 .

[9]  A. L. Gurson,et al.  Porous Rigid Plastic Materials Containing Rigid Inclusions; Yield Function, Plastic Potential and Void Nucleation , 1976 .

[10]  E. Steck,et al.  Theoretical and experimental investigations of fracture by finite element and grating methods , 1994 .

[11]  H. Takahashi,et al.  Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KIC , 1991 .

[12]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[13]  Andreas Zell,et al.  SNNS (Stuttgart Neural Network Simulator) , 1994 .

[14]  Ch. Tsakmakis,et al.  Determination of constitutive properties of thin metallic films on substrates by spherical indentation using neural networks , 2000 .

[15]  Rudolf Kruse,et al.  Neuronale Netze und Fuzzy-Systeme , 1994 .

[16]  J. Bulloch,et al.  Toughness losses in low alloy steels at high temperatures : An appraisal of certain factors concerning the small punch test , 1998 .

[17]  H. Takahashi,et al.  Estimation of mechanical properties of irradiated nuclear pressure vessel steel by use of subsized CT specimen and small punch specimen , 1991 .

[18]  M. Suzuki,et al.  Development of a Miniaturized Bulge Test (Small Punch Test) for Post-Irradiation Mechanical Property Evaluation , 1993 .

[19]  O. Buck,et al.  Development of Small Punch Tests for Ductile-Brittle Transition Temperature Measurement of Temper Embrittled Ni-Cr Steels , 1986 .

[20]  Cs Catherine,et al.  Small Punch Test : EPRI-CEA Finite Element Simulation Benchmark and Inverse Method for the Estimation of Elastic Plastic Behavior , 2002 .

[21]  S. Hannula,et al.  ASTM Special Technical Publication , 1986 .

[22]  Otto Buck,et al.  Small punch test evaluation of intergranular embrittlement of an alloy steel , 1983 .

[23]  Percy Williams Bridgman,et al.  Studies in large plastic flow and fracture , 1964 .