Optimization of the microcable and detector parameters towards low noise in the STS readout system
暂无分享,去创建一个
[2] Pawel Grybos,et al. STS-XYTER, a high count-rate self-triggering silicon strip detector readout IC for high resolution time and energy measurements , 2014, 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC).
[3] J. Heuser,et al. Measurement of coupling and interstrip capacitances in silicon microstrip sensors for the CBM experiment at FAIR , 2014 .
[4] I. Kipnis. Noise analysis due to strip resistance in the ATLAS SCT silicon strip module , 1996 .
[5] P. Grybos,et al. Time and energy measuring front-end electronics for long silicon strip detectors readout , 2013, 2013 IEEE Nuclear Science Symposium and Medical Imaging Conference (2013 NSS/MIC).
[6] J. Heuser,et al. First mock-up of the CBM STS module based on a new assembly concept , 2014 .
[7] K. Kasiński,et al. Wpływ szeregowej rezystancji przewodów oraz półprzewodnikowych detektorów paskowych na parametry szumowe układu detekcyjnego , 2012 .
[8] Pawel Grybos,et al. Noise optimization of the time and energy measuring ASIC for silicon tracking system , 2015, 2015 22nd International Conference Mixed Design of Integrated Circuits & Systems (MIXDES).
[9] Krzysztof Kasinski,et al. Time and energy measurement ASIC for microstrip detectors with two-level reset system based on the Time-over-Threshold technique , 2014, 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC).
[10] Ulrich Frankenfeld,et al. [GSI Report 2013-4] Technical Design Report for the CBM Silicon Tracking System (STS) , 2013 .