Optimizing LPSO phase to achieve superior heat resistance of Mg–Gd–Y–Zn–Zr alloys by regulating the Gd/Y ratios

[1]  Dingfei Zhang,et al.  Introducing Lamellar Lpso Phase to Regulate Room and High-Temperature Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloys by Altering Cooling Rate , 2023, SSRN Electronic Journal.

[2]  S. Yamasaki,et al.  Role of disclinations around kink bands on deformation behavior in Mg–Zn–Y alloys with a long-period stacking ordered phase , 2023, Acta Materialia.

[3]  Y. Liu,et al.  Clarifying the deformation modes and strengthening mechanisms of Mg-11Gd-5Y-2Zn-0.7Zr with outstanding high-temperature mechanical properties , 2023, Materials Science and Engineering: A.

[4]  Yang Bai,et al.  Spheroidization behavior of W phase and transformation process of LPSO phase during solid-solution treatment in Mg-Zn-Y-Mn-Ti alloy , 2022, Journal of Materials Research and Technology.

[5]  Zhaoming Yan,et al.  Abnormal texture formation and mechanical anisotropy of pre-aging extruded Mg-Gd-Y-Zn-Zr alloy with large-scale , 2022, Journal of Materials Research and Technology.

[6]  Yiming Jin,et al.  Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: Review and perspective , 2022, Journal of Magnesium and Alloys.

[7]  Guohua Wu,et al.  Improvements of elevated temperature tensile strengths of Mg-Gd-Y-Zr alloy through squeeze cast , 2021, Materials Characterization.

[8]  Dingfei Zhang,et al.  Anomalous effect of grain size on the room-temperature bendability of Mg–Gd alloy sheet , 2021, Materials Science and Engineering: A.

[9]  Jinxing Wang,et al.  Formation of an abnormal texture in Mg-Gd-Y-Zn-Mn alloy and its effect on mechanical properties by altering extrusion parameters , 2021, Materials Science and Engineering: A.

[10]  E. Abe,et al.  Microstructures and mechanical properties of as-cast Mg-Sm-Zn-Zr alloys with varying Gd contents , 2021, Journal of Magnesium and Alloys.

[11]  Jacob C. Huang,et al.  Activation of pyramidal II slips at room temperature in Mg–Zn–Y 18R and 14H long-period stacking ordered phases , 2021 .

[12]  Q. Deng,et al.  Synergic effects of Gd and Y contents on the age-hardening response and elevated-temperature mechanical properties of extruded Mg–Gd(-Y)-Zn-Mn alloys , 2021 .

[13]  Chao Xu,et al.  Effect of extrusion ratio and temperature on microstructures and tensile properties of extruded Mg-Gd-Y-Mn-Sc alloy , 2021 .

[14]  K. Guan,et al.  Microstructures and mechanical properties of a Mg–9Gd−3Y−0.6Zn−0.4Zr (wt.%) alloy modified by Y-rich misch metal , 2020 .

[15]  Li Jin,et al.  Effect of Zn/(Gd+Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy , 2020 .

[16]  K. Hagihara,et al.  Kink Formation Process in Long-Period Stacking Ordered Mg-Zn-Y Alloy , 2020 .

[17]  Jianan Liu,et al.  Microstructure and Mechanical Properties of Mg–2.0Gd–1.2Y–1.0Zn–0.2Zr Alloy , 2020, Metals and Materials International.

[18]  Yan Feng,et al.  Characterization of elevated-temperature high strength and decent thermal conductivity extruded Mg-Er-Y-Zn alloy containing nano-spaced stacking faults , 2019, Materials Characterization.

[19]  Yan Feng,et al.  Development of extruded Mg-6Er-3Y-1.5Zn-0.4Mn (wt.%) alloy with high strength at elevated temperature , 2019, Journal of Materials Science & Technology.

[20]  Song-Jeng Huang,et al.  Ageing behavior and mechanisms of strengthening and toughening of ultrahigh-strength Mg-Gd-Y-Zn-Mn alloy , 2019, Materials Science and Engineering: A.

[21]  W. Kim,et al.  Effect of I(Mg3YZn6)-, W(Mg3Y2Zn3)- and LPSO(Mg12ZnY)-phases on tensile work-hardening and fracture behaviors of rolled Mg–Y–Zn alloys , 2019, Journal of Materials Research and Technology.

[22]  M. Castillo-Rodríguez,et al.  Origin of the low precipitation hardening in magnesium alloys , 2019, Acta Materialia.

[23]  Jing Wu,et al.  Kink boundaries and their role in dynamic recrystallisation of a Mg-Zn-Y alloy , 2019, Materials Characterization.

[24]  T. Li,et al.  Weak strengthening effect of the precipitated lamellar phase in the homogenized Mg-8Gd-4Y-1.6Zn-0.5Zr (wt%) alloy followed by furnace cooling , 2019, Materials Science and Engineering: A.

[25]  R. Wu,et al.  Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems , 2018, Journal of Magnesium and Alloys.

[26]  Tao Chen,et al.  Evolution of LPSO phases in a Mg-Zn-Y-Gd-Zr alloy during semi-continuous casting, homogenization and hot extrusion , 2018, Materials & Design.

[27]  K. Hagihara,et al.  Configuration of dislocations in low-angle kink boundaries formed in a single crystalline long-period stacking ordered Mg-Zn-Y alloy , 2018, Acta Materialia.

[28]  H. Ye,et al.  Sliding and Migration of Tilt Grain Boundaries in a Mg–Zn–Y Alloy , 2018 .

[29]  Huihui Yu,et al.  Hall-Petch relationship in Mg alloys: A review , 2017 .

[30]  Q. Le,et al.  Effects of Zn/Gd ratio on the microstructures and mechanical properties of Mg-Zn-Gd-Zr alloys , 2017 .

[31]  Shu-nong Jiang,et al.  Evolution of LPSO Phases and Their Effect on Dynamic Recrystallization in a Mg-Gd-Y-Zn-Zr Alloy , 2017, Metallurgical and Materials Transactions A.

[32]  Jie Chen,et al.  Distribution control of AlN particles in Mg-Al/AlN composites , 2017 .

[33]  H. Yan,et al.  Creep Behavior and Microstructure Evolution of Sand-Cast Mg-4Y-2.3Nd-1Gd-0.6Zr Alloy Crept at 523-573 K , 2017 .

[34]  D. Raabe,et al.  Room temperature deformation of LPSO structures by non-basal slip , 2017 .

[35]  X. Shao,et al.  Atomic-scale segregations at the deformation-induced symmetrical boundary in an Mg-Zn-Y alloy , 2016 .

[36]  Jie Chen,et al.  Evolutions of microstructure and mechanical properties for Mg-Al/AlN composites under hot extrusion , 2016 .

[37]  T. Langdon,et al.  An Unusual Extrusion Texture in Mg–Gd–Y–Zr Alloys   , 2016 .

[38]  Lei Zhang,et al.  Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process , 2015, Scientific Reports.

[39]  Song-Jeng Huang,et al.  Effect of Gd and Y contents on the microstructural evolution of long period stacking ordered phase and the corresponding mechanical properties in Mg–Gd–Y–Zn–Mn alloys , 2014 .

[40]  Yao Liu,et al.  A polycrystal based numerical investigation on the temperature dependence of slip resistance and texture evolution in magnesium alloy AZ31B , 2014 .

[41]  K. Hagihara,et al.  Elastic properties of an Mg-Zn-Y alloy single crystal with a long-period stacking-ordered structure , 2013 .

[42]  Qiang Yang,et al.  Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing , 2013 .

[43]  E. Abe,et al.  Micro-Kinking of the Long-Period Stacking/Order (LPSO) Phase in a Hot-Extruded Mg97Zn1Y2 Alloy , 2013 .

[44]  K. Hagihara,et al.  Crystallographic classification of kink bands in an extruded Mg–Zn–Y alloy using intragranular misorientation axis analysis , 2013 .

[45]  Yan Du,et al.  Effect of ageing treatment on the microstructure, texture and mechanical properties of extruded Mg–8.2Gd–3.8Y–1Zn–0.4Zr (wt%) alloy , 2013 .

[46]  Alan A. Luo,et al.  Magnesium casting technology for structural applications , 2013 .

[47]  Song-Jeng Huang,et al.  Effects of heat treatment on the morphology of long-period stacking ordered phase and the corresponding mechanical properties of Mg–9Gd–xEr–1.6Zn–0.6Zr magnesium alloys , 2013 .

[48]  Yuman Zhu,et al.  Growth and transformation mechanisms of 18R and 14H in Mg–Y–Zn alloys , 2012 .

[49]  M. Gibson,et al.  Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44 , 2012, Metallurgical and Materials Transactions A.

[50]  R. Wu,et al.  Microstructure and high mechanical properties of Mg–9RY–4Zn (RY: Y-rich misch metal) alloy with long period stacking ordered phase , 2012 .

[51]  W. Ding,et al.  The relationship between (Mg,Zn)3RE phase and 14H-LPSO phase in Mg-Gd-Y-Zn-Zr alloys solidified at different cooling rates , 2011 .

[52]  K. Hagihara,et al.  Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy , 2010 .

[53]  Seong-Gu Hong,et al.  Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy , 2010 .

[54]  Xiuliang Ma,et al.  Strengthening and toughening mechanisms in Mg–Zn–Y alloy with a long period stacking ordered structure , 2010 .

[55]  J. Meng,et al.  Effect of ageing treatment on the microstructures and mechanical properties of the extruded Mg-7Y-4Gd-1.5Zn-0.4Zr alloy , 2010 .

[56]  K. Kainer,et al.  Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42 , 2009 .

[57]  Xiaochun Li,et al.  Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites , 2008 .

[58]  Daokui Xu,et al.  Effect of W-phase on the mechanical properties of as-cast Mg–Zn–Y–Zr alloys , 2008 .

[59]  Yangshan Sun,et al.  Microstructure and mechanical properties in cast magnesium–neodymium binary alloys , 2008 .

[60]  S. Agnew,et al.  Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet , 2007 .

[61]  M. Qian,et al.  Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains , 2006 .

[62]  D. StJohn,et al.  Heterogeneous nuclei size in magnesium-zirconium alloys , 2004 .

[63]  A. Luo.  Recent magnesium alloy development for elevated temperature applications , 2004 .

[64]  C. Tomé,et al.  Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling , 2003 .

[65]  A. Singh,et al.  Crack propagation along grain boundaries and twins in Mg and Mg–0.3 at.%Y alloy during in-situ straining in transmission electron microscope , 2018 .

[66]  Chao Xu,et al.  The partial substitution of Y with Gd on microstructures and mechanical properties of as-cast and as-extruded Mg-10Zn-6Y-0.5Zr alloy , 2018 .

[67]  O. Hunderi,et al.  On the Zener drag , 1985 .