Natural gas HCCI engine operation with exhaust gas fuel reforming

Natural gas has a high auto-ignition temperature, requiring high compression ratios and/or intake charge heating to achieve homogenous charge compression ignition (HCCI) engine operation. It is shown here that hydrogen in the form of reformed gas helps in lowering the intake temperature required for stable HCCI operation. It has been shown that the addition of hydrogen advances the start of combustion in the cylinder. This is a result of the lowering of the minimum intake temperature required for auto-ignition to occur during the compression stroke, resulting in advanced combustion for the same intake temperatures. This paper documents experimental results using closed loop exhaust gas fuel reforming for production of hydrogen. When this reformed gas is introduced into the engine, a decrease in intake air temperature requirement is observed for a range of engine loads. Thus for a given intake temperature, lower engine loads can be achieved. This would translate to an extension of the HCCI lower load boundary for a given intake temperature.

[1]  D. Foster,et al.  Compression-Ignited Homogeneous Charge Combustion , 1983 .

[2]  Yukiyasu Tanaka,et al.  A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products during Combustion , 1979 .

[3]  Bengt Johansson,et al.  Demonstrating the Multi Fuel Capability of a Homogeneous Charge Compression Ignition Engine with Variable Compression Ratio , 1999 .

[4]  A. Megaritis,et al.  Catalytic exhaust gas fuel reforming for diesel engines—effects of water addition on hydrogen production and fuel conversion efficiency , 2004 .

[5]  Robert W. Dibble,et al.  A Multi-Zone Model for Prediction of HCCI Combustion and Emissions , 2000 .

[6]  A. Megaritis,et al.  Reaction Profiles during Exhaust-Assisted Reforming of Diesel Engine Fuels , 2005 .

[7]  A. Megaritis,et al.  Low temperature exhaust gas fuel reforming of diesel fuel , 2004 .

[8]  Fausto Gallucci,et al.  A simulation study of the steam reforming of methane in a dense tubular membrane reactor , 2004 .

[9]  Robert W. Dibble,et al.  A Decoupled Model of Detailed Fluid Mechanics Followed by Detailed Chemical Kinetics for Prediction of Iso-Octane HCCI Combustion , 2001 .

[10]  A. Megaritis,et al.  Application of Exhaust Gas Fuel Reforming in Compression Ignition Engines Fueled by Diesel and Biodiesel Fuel Mixtures , 2003 .

[11]  Joshua R. Smith,et al.  A Sequential Fluid-mechanic Chemical-kinetic Model of Propane HCCI Combustion , 2001 .

[12]  A. Megaritis,et al.  An Investigation into Bioethanol Homogeneous Charge Compression Ignition (HCCI) Engine Operation with Residual Gas Trapping , 2004 .

[13]  Keith D. King,et al.  Reforming of CH4 by partial oxidation: thermodynamic and kinetic analyses , 2001 .

[14]  A. Megaritis,et al.  Exhaust gas assisted reforming of rapeseed methyl ester for reduced exhaust emissions of CI engines. , 2004 .

[15]  Kinji Tsujimura,et al.  An Experimental Study of Premixed Lean Diesel Combustion , 1999 .

[16]  Bengt Johansson,et al.  Homogeneous Charge Compression Ignition (HCCI) Using Isooctane, Ethanol and Natural Gas - A Comparison with Spark Ignition Operation , 1997 .

[17]  A. Megaritis,et al.  Hydrogen enrichment: A way to maintain combustion stability in a natural gas fuelled engine with exhaust gas recirculation, the potential of fuel reforming , 2001 .

[18]  Bengt Johansson,et al.  Closed-Loop Control of an HCCI Engine , 2001 .