Energy, exergy, enviroeconomic & exergoeconomic (4E) assessment of thermal energy storage assisted solar water heating system: Experimental & theoretical approach

[1]  Ali E. Anqi,et al.  Experimental investigation of an evacuated tube solar collector incorporating nano-enhanced PCM as a thermal booster , 2020 .

[2]  M. Essa,et al.  Experimental and Theoretical Analysis for the Performance of Evacuated Tube Collector Integrated with Helical Finned Heat Pipes using PCM Energy Storage , 2020, Energy.

[3]  Sarvenaz Sobhansarbandi,et al.  CFD modeling of a thermal energy storage based heat pipe evacuated tube solar collector , 2020 .

[4]  A. Al-Rashed,et al.  Proposal of a novel integrated ocean thermal energy conversion system with flat plate solar collectors and thermoelectric generators: Energy, exergy and environmental analyses , 2020 .

[5]  A. Raja,et al.  Novel parabolic trough solar collector and solar photovoltaic/thermal hybrid system for multi-generational systems , 2020 .

[6]  T. Chow,et al.  Experimental and numerical analysis of solar-absorbing metallic facade panel with embedded heat-pipe-array , 2020 .

[7]  Chengwei Ma,et al.  Performance of a water-circulating solar heat collection and release system for greenhouse heating using an indoor collector constructed of hollow polycarbonate sheets , 2020 .

[8]  Y. Diao,et al.  Thermal performance of integrated collector storage solar air heater with evacuated tube and lap joint-type flat micro-heat pipe arrays , 2020 .

[9]  T. Ma,et al.  Photovoltaic thermal module and solar thermal collector connected in series: Energy and exergy analysis , 2020 .

[10]  R. Winston,et al.  Technical and economic analysis of a novel low-cost concentrated medium-temperature solar collector , 2020 .

[11]  A. K. Pathak,et al.  Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: An experimental assessment , 2020, Energy Conversion and Management.

[12]  H. S. Akhijahani,et al.  CFD modeling and evaluation the performance of a solar cabinet dryer equipped with evacuated tube solar collector and thermal storage system , 2020 .

[13]  K. Arun,et al.  Numerical studies on the effect of location and number of containers on the phase transition of PCM-integrated evacuated tube solar water heater , 2019, Journal of Thermal Analysis and Calorimetry.

[14]  Hassan Naji Salman Al-Joboory,et al.  Comparative experimental investigation of two evacuated tube solar water heaters of different configurations for domestic application of Baghdad- Iraq , 2019, Energy and Buildings.

[15]  A. K. Pathak,et al.  Experimental performance evaluation of a novel designed phase change material integrated manifold heat pipe evacuated tube solar collector system , 2019, Energy Conversion and Management.

[16]  Alemayehu Gebremedhin,et al.  Energy performance analysis of a forced circulation solar water heating system equipped with a heat pipe evacuated tube collector under the Mediterranean climate conditions , 2019, Renewable Energy.

[17]  G. Pei,et al.  Theoretical and experimental studies of impacts of heat shields on heat pipe evacuated tube solar collector , 2019, Renewable Energy.

[18]  Ahmed Amine Hachicha,et al.  Energy, exergy and economic analyses for the selection of working fluid and metal oxide nanofluids in a parabolic trough collector , 2019, Solar Energy.

[19]  Rohit Tripathi,et al.  Energy matrices, life cycle cost, carbon mitigation and credits of open-loop N concentrated photovoltaic thermal (CPVT) collector at cold climate in India: A comparative study , 2019, Solar Energy.

[20]  M. S. Naghavi,et al.  An analytical and comparative study of the charging and discharging processes in a latent heat thermal storage tank for solar water heater system , 2019, Solar Energy.

[21]  Amr Kotb,et al.  Thermal performance of a heat-pipe evacuated-tube solar collector at high inlet temperatures , 2019, Applied Thermal Engineering.

[22]  Meng Li,et al.  Energy, exergy, exergoeconomic and environmental (4E) analysis of a distributed generation solar-assisted CCHP (combined cooling, heating and power) gas turbine system , 2019, Energy.

[23]  Mohamed Fathy,et al.  Experimental work on the effect of saline water medium on the performance of solar still with tracked parabolic trough collector (TPTC) , 2019, Renewable Energy.

[24]  N. Zhang,et al.  Thermal reliability of typical fatty acids as phase change materials based on 10,000 accelerated thermal cycles , 2019, Sustainable Cities and Society.

[25]  R. Daghigh,et al.  Improving the performance of heat pipe embedded evacuated tube collector with nanofluids and auxiliary gas system , 2019, Renewable Energy.

[26]  Omar Bait.  Exergy, environ–economic and economic analyses of a tubular solar water heater assisted solar still , 2019, Journal of Cleaner Production.

[27]  K. Ismail,et al.  A new version of a low concentration evacuated tube solar collector: Optical and thermal investigation , 2019, Solar Energy.

[28]  F. Hagos,et al.  The effect of thermal cyclic variation on the thermophysical property degradation of paraffin as a phase changing energy storage material , 2019, Applied Thermal Engineering.

[29]  N. Mostafa,et al.  An experimental investigation of the phase change process effects on the system performance for the evacuated tube solar collectors integrated with PCMs , 2018, Energy Conversion and Management.

[30]  K. Mylsamy,et al.  Experimental investigation of solar water heater integrated with a nanocomposite phase change material , 2018, Journal of Thermal Analysis and Calorimetry.

[31]  A. K. Pandey,et al.  Thermal and exergoeconomic analysis of a dairy food processing plant , 2018, Journal of Thermal Analysis and Calorimetry.

[32]  Jalal M. Jalil,et al.  Improving the performance of heat pipe-evacuated tube solar collector experimentally by using Al2O3 and CuO/acetone nanofluids , 2018, Solar Energy.

[33]  A. K. Pandey,et al.  Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications , 2018, Applied Energy.

[34]  Yaxiong Wang,et al.  Experimental investigation of a solar thermal storage heater assembled with finned heat pipe and collective vacuum tubes , 2018, Energy Conversion and Management.

[35]  B. Li,et al.  Experimental and numerical investigation of a solar collector/storage system with composite phase change materials , 2018 .

[36]  M. Abokersh,et al.  An experimental evaluation of direct flow evacuated tube solar collector integrated with phase change material , 2017 .

[37]  R. Sekret,et al.  Effect of PCM application inside an evacuated tube collector on the thermal performance of a domestic hot water system , 2017 .

[38]  M. S. Naghavi,et al.  Thermal performance of a compact design heat pipe solar collector with latent heat storage in charging/discharging modes , 2017 .

[39]  A. E. Kabeel,et al.  Augmentation of thermal efficiency of the glass evacuated solar tube collector with coaxial heat pipe with different refrigerants and filling ratio , 2017 .

[40]  R. Sekret,et al.  Effect of a low cost parabolic reflector on the charging efficiency of an evacuated tube collector/storage system with a PCM , 2017 .

[41]  S. Chamoli,et al.  A review on technical improvements, economic feasibility and world scenario of solar water heating system , 2017 .

[42]  G. Tiwari,et al.  Overall energy, exergy and carbon credit analysis of N partially covered Photovoltaic Thermal (PVT) concentrating collector connected in series , 2016 .

[43]  Vladimir A. Pozdin,et al.  Evacuated tube solar collectors integrated with phase change materials , 2016 .

[44]  S. Bhatia.  4 – Solar thermal energy , 2014 .