The 650-nm variable optical attenuator based on polymer/silica hybrid waveguide*

Visible light variable optical attenuators (VOA) are essential devices in the application of channel power regulation and equalization in wavelength-division multiplexing cross-connect nodes in plastic optical fiber (POF) transmission systems. In this paper, a polymer/silica hybrid waveguide thermo–optic attenuator based on multimode interference (MMI) coupler is designed and fabricated to operate at 650 nm. The single-mode transmission condition, MMI coupler, and transition taper dimensions are optimized through the beam propagation method. Thermal analysis based on material properties provides the optimized heater placement angle. The fabricated VOA presents an attenuation of 26.5 dB with a 21-mW electrical input power at 650 nm. The rise time and fall time are 51.99 and 192 μs, respectively. The time–stability measurement results prove its working reliability.

[1]  M. Chin,et al.  Multimode interference optical splitter based on photodefinable benzocyclobutene (BCB 4024-40) polymer , 2007 .

[2]  O. Ziemann,et al.  10.7-Gb/s Discrete Multitone Transmission Over 50-m SI-POF Based on WDM Technology , 2012, IEEE Photonics Technology Letters.

[3]  Christoph Eichler,et al.  Beyond blue pico laser: development of high power blue and low power direct green , 2012, OPTO.

[4]  H. Schafft.  Thermal analysis of electromigration test structures , 1987, IEEE Transactions on Electron Devices.

[5]  Nan Chi,et al.  Experimental verification of performance improvement for a gigabit wavelength division multiplexing visible light communication system utilizing asymmetrically clipped optical orthogonal frequency division multiplexing , 2014 .

[6]  Katsuyuki Utaka,et al.  Design and Performance of Low-Power, High-Speed, Polarization-Independent and Wideband Polymer Buried-Channel Waveguide Thermo-Optic Switches , 2014, Journal of Lightwave Technology.

[7]  Sang-Pil Han,et al.  Reconfigurable Optical Add-Drop Multiplexer Using a Polymer Integrated Photonic Lightwave Circuit , 2009 .

[8]  E. Tangdiongga,et al.  Cost optimization of optical in-building networks , 2011, 2011 37th European Conference and Exhibition on Optical Communication.

[9]  Xibin Wang,et al.  Optimized inductively coupled plasma etching for poly(methyl-methacrylate-glycidly-methacrylate) optical waveguide , 2012 .

[10]  Zhiyi Zhang,et al.  A variable optical attenuator based on a straight polymer-silica hybrid channel waveguide , 2004, IEEE Photonics Technology Letters.

[11]  D. Bradley,et al.  Optical gain at 650 nm from a polymer waveguide with dye-doped cladding , 2005 .

[12]  Yong Hyub Won,et al.  Polymer waveguide variable optical attenuator and its reliability , 2004 .

[13]  Sun Yi-ling,et al.  Analysis of the fully destructive interference of overlapping-images in MMI couplers , 2007 .

[14]  Masatoshi Yonemura,et al.  Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication. , 2005, Optics letters.

[15]  Jian Sun,et al.  Fabrication of single-mode ridge SU-8 waveguides based on inductively coupled plasma etching , 2013 .

[16]  Roberto Gaudino,et al.  Plastic optical fiber technology for reliable home networking: overview and results of the EU project pof-all , 2009, IEEE Communications Magazine.

[17]  Deepak Uttamchandani,et al.  Modeling and Characterization of a Vernier Latching MEMS Variable Optical Attenuator , 2013, Journal of Microelectromechanical Systems.

[18]  E.C.M. Pennings,et al.  Optical multi-mode interference devices based on self-imaging: principles and applications , 1995 .

[19]  S.M. Garner,et al.  Variable optical attenuator for large-scale integration , 2002, IEEE Photonics Technology Letters.

[20]  Ivo Rendina,et al.  Advance in thermo-optical switches: principles, materials, design, and device structure , 2011 .