Nuclear power plant containments are typically both the last line of defense against the release of radioactivity to the environment and the first line of defense to protect against intrusion from external objects. As such, it is important to be able to locate any damage that would limit the integrity of the containment itself. Typically, a portion of the containment consists of a metallic pressure boundary that encloses the reactor primary circuit. It is made of thick steel plates welded together, lined with concrete and partially buried, limiting areas that can be visually inspected for corrosion damage. This study presents a strategy using low frequency (<50 kHz) guided waves to find corrosion‐like damage several meters from the probe in a mock‐up of the containment vessel. A magnetostrictive sensor (MsS) is scanned across the width of the vessel, acquiring waveforms at a fixed interval. A beam forming strategy is used to localize the defects. Experimental results are presented for a variety of damage ...
[1]
W. E. Lawrie,et al.
Ultrasonic testing of materials: 2nd English Edition, translated from the 3rd German Edition, J. & H. Krautkrämer Springer-Verlag, Berlin, Heidelberg, New York (1977) 667 pp, $65.20, DM 148
,
1978
.
[2]
Hitoshi Ishida.
An Ultrasonic Technique for the Testing of Plates Embedded in Concrete with a Multielement Probe
,
2008
.
[3]
C. Burrus,et al.
Array Signal Processing
,
1989
.
[4]
Hegeon Kwun,et al.
Magnetostrictive Sensor for Generating and Detecting Plate Guided Waves
,
2005
.
[5]
H. Kwun,et al.
The magnetostrictive sensor technology for long range guided wave testing and monitoring of structures
,
2003
.