Comparison of oxygen plasma and cutinase effect on polyethylene terephthalate surface

The aim of the study is to activate inert PET surface in order to introduce the carboxyl groups and to obtain its hydrophilic character. Two advanced and environmentally friendly techniques were used for these purposes: i) oxygen plasma activation; ii) enzymatic treatment by cutinase. Differently treated PET foils were studied in terms of carboxylic group content (non-aqueous potentiometric titrations, XPS) and hydrophobic/hydrophilic character (goniometry). Moreover, the influence of both activation procedures onto chitosan adsorption was examined by XPS, zeta potential measurements and ATR-FTIR spectroscopy. Obtained results show that plasma activation gives for around 19% higher amount of carboxylic groups than cutinase treatment and is during the storage less stable. Results clearly show that the use of both surfaces activation processes increases the ability of PET foils for chitosan adsorption. Due to the fact that chitosan is an antimicrobial agent, obtained materials may be applied as an active packaging system. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

[1]  Changyou Gao,et al.  Adhesive properties of polypropylene (PP) and polyethylene terephthalate (PET) film surfaces treated by DC glow discharge plasma , 2008 .

[2]  Stephen W. Bigger,et al.  Active Packaging Technologies with an Emphasis on Antimicrobial Packaging and its Applications , 2003 .

[3]  P. Paseiro Losada,et al.  Active and intelligent packaging: applications and regulatory aspects , 2002, Food additives and contaminants.

[4]  Ying Jun Du,et al.  Blood-compatible biomaterials by surface coating with a novel antithrombin-heparin covalent complex. , 2002, Biomaterials.

[5]  Jung H. Han,et al.  Antimicrobial food packaging , 2000 .

[6]  Manoj Komath,et al.  Plasma surface modification of polystyrene and polyethylene , 2004 .

[7]  G. Guebitz,et al.  Enzymatic surface hydrolysis of poly(ethylene terephthalate) and bis(benzoyloxyethyl) terephthalate by lipase and cutinase in the presence of surface active molecules. , 2009, Journal of biotechnology.

[8]  G. Guebitz,et al.  Surface hydrolysis of polyacrylonitrile with nitrile hydrolysing enzymes from Micrococcus luteus BST20. , 2007, Journal of biotechnology.

[9]  Rok Zaplotnik,et al.  A Fiber Optic Catalytic Sensor for Neutral Atom Measurements in Oxygen Plasma , 2012, Sensors.

[10]  M. N. R. Kumar.  A review of chitin and chitosan applications , 2000 .

[11]  Margarida Casal,et al.  Tailoring cutinase activity towards polyethylene terephthalate and polyamide 6,6 fibers. , 2007, Journal of biotechnology.

[12]  F. Poncin‐Epaillard,et al.  Characterization of CO2 plasma-treated polyethylene surface bearing carboxylic groups , 2002 .

[13]  W. Deckwer,et al.  Enzymatic Degradation of Poly(ethylene terephthalate): Rapid Hydrolyse using a Hydrolase from T. fusca , 2005 .

[14]  M. Mozetič,et al.  Surface modification of polyester by oxygen‐ and nitrogen‐plasma treatment , 2008 .

[15]  M. Mozetič,et al.  Microwave discharge as a remote source of neutral oxygen atoms , 2011 .

[16]  F. Tanfani,et al.  The N-permethylation of chitosan and the preparation of N-trimethyl chitosan iodide , 1985 .

[17]  R. Morent,et al.  Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure , 2007 .