Durable shape sensor based on FBG array inscribed in polyimide-coated multicore optical fiber.

The paper presents a novel three-dimensional quasi-continuous shape sensor based on an FBG array inscribed by femtosecond laser pulses into a 7-core optical fiber with a polyimide protective coating. The measured bending sensitivity of individual FBGs ranges from 0.046 nm/m-1 to 0.049 nm/m-1. It is shown that the sensor allows for reconstructing 2- and 3-dimensional shapes with high accuracy. Due to the high value of the core aperture and individual calibration of each FBG we were able to measure the smallest reported bending radii down to 2.6 mm with a record accuracy of ∼1%. Moreover, we investigate the magnitude of the errors of curves reconstruction and errors associated with measurement of curvature radii in the range from 2.6 to 500 mm. The main factors affecting the accuracy of measurements are also discussed. The temperature resistance of both the inscribed FBG structures and of the protective coating, along with the high mechanical strength of the polyimide, makes it possible to use the sensor in harsh environments or in medical and composite material applications.

[1]  Nicholas F. Borrelli,et al.  Study of femtosecond-laser-written waveguides in glasses , 2002 .

[2]  D. Simoff,et al.  Thermal Stability of Specialty Optical Fibers , 2008, Journal of Lightwave Technology.

[3]  Nobuo Takeda,et al.  Polyimide-coated small-diameter optical fiber sensors for embedding in composite laminate structures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Sergey A. Babin,et al.  Experimental Method of Temperature and Strain Discrimination in Polymer Composite Material by Embedded Fiber-Optic Sensors Based on Femtosecond-Inscribed FBGs , 2016, J. Sensors.

[5]  A. Wolf,et al.  Femtosecond point-by-point inscription of Bragg gratings by drawing a coated fiber through ferrule. , 2016, Optics express.

[6]  Vedran Budinski,et al.  Fiber-Optic Sensors for Measurements of Torsion, Twist and Rotation: A Review , 2017, Sensors.

[7]  J Carrier,et al.  High mechanical strength fiber Bragg gratings made with infrared femtosecond pulses and a phase mask. , 2014, Optics letters.

[8]  I Bennion,et al.  Point-by-point inscription of first-order fiber Bragg grating for C-band applications. , 2007, Optics express.

[9]  Jie Li,et al.  Mechanical properties of polyimide coated optical fibers at elevated temperatures , 2016, SPIE BiOS.

[10]  A. Wolf,et al.  Arrays of fiber Bragg gratings selectively inscribed in different cores of 7-core spun optical fiber by IR femtosecond laser pulses. , 2019, Optics express.

[11]  S. Misra,et al.  Multi-Core Optical Fibers With Bragg Gratings as Shape Sensor for Flexible Medical Instruments , 2019, IEEE Sensors Journal.

[12]  G. Hocker,et al.  Fiber optics strain gauge. , 1978, Applied optics.

[13]  P Paillet,et al.  Radiation tolerant fiber Bragg gratings for high temperature monitoring at MGy dose levels. , 2014, Optics letters.

[14]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.

[15]  Adrian Mariampillai,et al.  Temperature-compensated fiber-optic 3D shape sensor based on femtosecond laser direct-written Bragg grating waveguides. , 2013, Optics express.

[16]  J. Canning.  Fibre gratings and devices for sensors and lasers , 2008 .

[17]  K. Itoh,et al.  Ultrafast Processes for Bulk Modification of Transparent Materials , 2006 .

[18]  Jason R. Grenier,et al.  Fiber optic stress-independent helical torsion sensor. , 2015, Optics letters.

[19]  Olga Nikolaevna Egorova,et al.  Microwave signal delay line based on multicore optical fiber , 2017 .

[20]  Robert S. Fielder,et al.  Fiber-Optic Shape Sensing and Distributed Strain Measurements on a Morphing Chevron , 2006 .

[21]  K. Holschemacher,et al.  Comparison between different fiber coatings and adhesives on steel surfaces for distributed optical strain measurements based on Rayleigh backscattering , 2018, Journal of Sensors and Sensor Systems.

[22]  D J Richardson,et al.  Point-by-point femtosecond laser micro-processing of independent core-specific fiber Bragg gratings in a multi-core fiber. , 2018, Optics express.

[23]  J. Albert,et al.  Tilted fiber Bragg grating sensors , 2013 .

[24]  Thierry F. Taunay,et al.  Continuous Multicore Optical Fiber Grating Arrays for Distributed Sensing Applications , 2017, Journal of Lightwave Technology.

[25]  Ivana Gasulla,et al.  Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers , 2017, Scientific Reports.

[26]  Matthew D. Rogge,et al.  Shape sensing using multi-core fiber optic cable and parametric curve solutions. , 2012, Optics express.

[27]  S. Mihailov,et al.  Plane-by-Plane Inscription of Grating Structures in Optical Fibers , 2018, Journal of Lightwave Technology.

[28]  Ian Bennion,et al.  Thermal properties of fibre Bragg gratings inscribed point-by-point by infrared femtosecond laser , 2005 .

[29]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[30]  Anatoliĭ Timofeevich Fomenko,et al.  A short course in differential geometry and topology , 2009 .