Abstract The performance of a hollow fiber reverse osmosis system is studied both theoretically and experimentally. Experiments were carried out for applied pressure ranging from 200 to 400 psig, feed rates varying from 75 to 380 cc/sec and for feed concentrations up to 34,000 ppm of sodium chloride. A mathematical model is proposed to predict productivity, ϕ, and product concentration, θp. The model involves solving membrane transport equations simultaneously with the hydrodynamic equations. The solubility-diffusion-imperfection, or pore diffusion model, is used to describe solute and solvent transport across the membrane. The axial gradients of shell side concentration, neglected in previous investigations, are taken into account. The differential equations are solved numerically by the 4th Order Runge-Kutta method. Predicted values of ϕ and θp agree within 8% and 17% respectively, with experimental data over the entire range of operating conditions. However, membrane transport coefficients were found t...
[1]
A. Katchalsky,et al.
Thermodynamic analysis of the permeability of biological membranes to non-electrolytes.
,
1958,
Biochimica et biophysica acta.
[2]
J. Hermans,et al.
Physical aspects governing the design of hollow fiber modules
,
1978
.
[3]
Thomas K. Sherwood,et al.
Desalination by Reverse Osmosis
,
1967
.
[4]
K. L. Hertel,et al.
The Flow of Air Through Porous Media
,
1940
.
[5]
Haruhiko Ohya,et al.
An analysis of reverse osmotic characteristics of B-9 hollow fiber module
,
1977
.
[6]
William N. Gill,et al.
Hollow fiber reverse osmosis systems analysis and design
,
1973
.
[7]
Mahendra R. Doshi,et al.
Hollow fiber reverse osmosis: experiments and analysis of radial flow systems
,
1975
.
[8]
M. Doshi,et al.
Optimal design of hollow fiber modules
,
1977
.