Bi-iterative moving enhanced model for probability-based transient LCF life prediction of turbine blisk
暂无分享,去创建一个
C. Fei | B. Keshtegar | Cheng Lu | Huan Li | Lei Han
[1] Honggen Zhou,et al. Multiaxial fatigue damage and reliability assessment of aero-engine compressor blades made of TC4 titanium alloy , 2021, Aerospace Science and Technology.
[2] C. Fei,et al. Competitive cracking behavior and microscopic mechanism of Ni-based superalloy blade respecting accelerated CCF failure , 2021 .
[3] Chengwei FEI,et al. Hierarchical model updating strategy of complex assembled structures with uncorrelated dynamic modes , 2021, Chinese Journal of Aeronautics.
[4] Yat-Sze Choy,et al. Probabilistic analyses of structural dynamic response with modified Kriging-based moving extremum framework , 2021, Engineering Failure Analysis.
[5] K. Behdinan,et al. Stress waves in thick porous graphene-reinforced cylinders under thermal gradient environments , 2021 .
[6] Chengwei Fei,et al. Probability-based service safety life prediction approach of raw and treated turbine blades regarding combined cycle fatigue , 2021 .
[7] Guang-Chen Bai,et al. A novel metamodeling approach for probabilistic LCF estimation of turbine disk , 2020 .
[8] Cheng-Wei Fei,et al. Moving extremum surrogate modeling strategy for dynamic reliability estimation of turbine blisk with multi-physics fields , 2020 .
[9] E. Zio,et al. Probabilistic-based combined high and low cycle fatigue assessment for turbine blades using a substructure-based kriging surrogate model , 2020 .
[10] John Dalsgaard Sørensen,et al. Surrogate model uncertainty in wind turbine reliability assessment , 2020, Renewable Energy.
[11] Rongqiao Wang,et al. Reliability assessment for system-level turbine disc structure using LRPIM-based surrogate model considering multi-failure modes correlation , 2019 .
[12] Cheng-Wei Fei,et al. Probabilistic Fatigue/Creep Optimization of Turbine Bladed Disk with Fuzzy Multi-Extremum Response Surface Method , 2019, Materials.
[13] Ikjin Lee,et al. Modified screening-based Kriging method with cross validation and application to engineering design , 2019, Applied Mathematical Modelling.
[14] Jun Liu,et al. A sequential constraints updating approach for Kriging surrogate model-assisted engineering optimization design problem , 2019, Engineering with Computers.
[15] T. Itoh,et al. Modified Improved Interpolating Moving Least Squares Method for Meshless Approaches , 2019, IEEE Transactions on Magnetics.
[16] B. Yue,et al. Probabilistic sensitivity analysis for the frame structure of missiles , 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
[17] Ling Ma,et al. A general framework for fatigue reliability analysis of a high temperature component , 2018, Qual. Reliab. Eng. Int..
[18] Cheng-Wei Fei,et al. Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade–disk , 2018, Aerospace Science and Technology.
[19] Shun-Peng Zhu,et al. Fatigue reliability assessment of turbine discs under multi‐source uncertainties , 2018 .
[20] Bo Li,et al. Zone-based reliability analysis on fatigue life of GH720Li turbine disk concerning uncertainty quantification , 2017 .
[21] Jie Wen,et al. Multi-objective reliability-based design optimization approach of complex structure with multi-failure modes , 2017 .
[22] Xiang Li,et al. A hybrid approach combining uniform design and support vector machine to probabilistic tunnel stability assessment , 2016 .
[23] Mehdi Dehghan,et al. A generalized moving least square reproducing kernel method , 2013, J. Comput. Appl. Math..
[24] K. Balaji Rao,et al. Probabilistic fatigue life analysis of welded steel plate railway bridge girders using S–N curve approach , 2013 .
[25] Bo Bergman,et al. Variation mode and effect analysis: an application to fatigue life prediction , 2009, Qual. Reliab. Eng. Int..
[26] Keith Worden,et al. Uncertainty analysis of a neural network used for fatigue lifetime prediction , 2008 .
[27] Suhail Ahmad,et al. Reliability of articulated tower joint against random base shear , 2007 .
[28] Haoyu Wang,et al. Safety Envelope for Load Tolerance and its Application to Fatigue Reliability Design , 2006 .
[29] Bruce M. Steinetz,et al. High-pressure-turbine clearance control systems: Current practices and future directions , 2004 .
[30] Sankaran Mahadevan,et al. Damage tolerance approach for probabilistic pitting corrosion fatigue life prediction , 2001 .
[31] Shun-Peng Zhu,et al. Probabilistic modeling of uncertainties in fatigue reliability analysis of turbine bladed disks , 2021 .
[32] Reza Ansari,et al. Vibration analysis of functionally graded carbon nanotube-reinforced composite elliptical plates using a numerical strategy , 2017 .
[33] Cheng-Wei Fei,et al. A stochastic model updating strategy-based improved response surface model and advanced Monte Carlo simulation , 2017 .
[34] Ben H. Thacker,et al. Capabilities and applications of probabilistic methods in finite element analysis , 2001 .