Delamination detection in composite beams using pure Lamb mode generated by air-coupled ultrasonic transducer

The interaction of Lamb wave A0 mode with delamination and delamination detection in 16-ply carbon fiber–reinforced epoxy composite beams are investigated through three-dimensional finite element simulation and experimental studies in this article. Wave propagation in composite beams with delamination with different lengths and located at different interfaces are investigated in finite element simulations, and some unique mechanisms of interaction between A0 mode and delamination are revealed in detail. Experimental results obtained with air-coupled ultrasonic transducers are well in accordance with finite element simulation results. In an experimental study, an air-coupled ultrasonic transducer is oriented at a coincidence angle such that it generates a pure fundamental antisymmetric Lamb wave mode A0 for delamination detection in laminated composite beams. The receiving transducer can be oriented either to detect the transmitted wave propagating in the same direction as incident wave or to detect the reflected wave in contrast to incident wave. The location and size of delamination can be evaluated quantitatively using the time-of-flight of reflected wave from both ends of the delamination.

[1]  Michel Castaings,et al.  FE modeling of Lamb mode diffraction by defects in anisotropic viscoelastic plates , 2006 .

[2]  Renaldas Raisutis,et al.  Ultrasonic air-coupled testing of square-shape CFRP composite rods by means of guided waves , 2011 .

[3]  K. Balasubramaniam,et al.  Interaction of the primary anti-symmetric Lamb mode (Ao) with symmetric delaminations: numerical and experimental studies , 2009 .

[4]  Charles R. Farrar,et al.  Development of capacitance-based and impedance-based wireless sensors and sensor nodes for structural health monitoring applications , 2010 .

[5]  Charles R Farrar,et al.  Damage prognosis: the future of structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[6]  Kazuro Kageyama,et al.  Optimal Mother Wavelet Selection for Lamb Wave Analyses , 2009 .

[7]  P. Cawley,et al.  The generation, propagation, and detection of Lamb waves in plates using air‐coupled ultrasonic transducers , 1996 .

[8]  Piervincenzo Rizzo,et al.  Structural Health Monitoring of Immersed Structures by Means of Guided Ultrasonic Waves , 2010 .

[9]  M. Bhardwaj.  Phenomenally High Transduction Air/gas Transducers for Practical Non-Contact Ultrasonic Applications , 2009 .

[10]  Younho Cho,et al.  A boundary element solution for a mode conversion study on the edge reflection of Lamb waves , 1996 .

[11]  Ningqun Guo,et al.  Lamb wave reflection for the quick nondestructive evaluation of large composite laminates , 1994 .

[12]  Charles R. Farrar,et al.  Use of Relative Baseline Features of Guided Waves for In situ Structural Health Monitoring , 2011 .

[13]  Peter W. Tse,et al.  Use of autocorrelation of wavelet coefficients for fault diagnosis , 2009 .

[14]  R Kazys,et al.  Air-coupled ultrasonic investigation of multi-layered composite materials. , 2006, Ultrasonics.

[15]  Krishnan Balasubramaniam,et al.  Interaction of guided Lamb waves with an asymmetrically located delamination in a laminated composite plate , 2010 .

[16]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[17]  Lin Ye,et al.  Guided Lamb waves for identification of damage in composite structures: A review , 2006 .

[18]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[19]  Guang Meng,et al.  Wave Propagation Analysis in Composite Laminates Containing a Delamination Using a Three-Dimensional Spectral Element Method , 2012 .

[20]  K. Craig,et al.  Damage detection in composite structures using piezoelectric materials (and neural net) , 1994 .

[21]  Gordon Dobie,et al.  Simulation of ultrasonic lamb wave generation, propagation and detection for a reconfigurable air coupled scanner. , 2011, Ultrasonics.

[22]  M. Castaings,et al.  Lamb and SH waves generated and detected by air-coupled ultrasonic transducers in composite material plates , 2001 .

[23]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[24]  Peter Cawley,et al.  Single Sided Inspection of Composite Materials Using Air Coupled Ultrasound , 1998 .

[25]  P. Cawley,et al.  The use of Lamb waves for the long range inspection of large structures , 1996 .

[26]  Mauri Luukkala,et al.  Metal plate testing using airborne ultrasound , 1973 .

[27]  P. Cawley,et al.  The interaction of Lamb waves with delaminations in composite laminates , 1993 .

[28]  David A. Hutchins,et al.  Air-Coupled Ultrasonic Bulk Waves to Measure Elastic Constants in Composite Materials , 1996 .

[29]  Marek Krawczuk,et al.  Modelling of wave propagation in composite plates using the time domain spectral element method , 2007 .