Large size biogas-fed Solid Oxide Fuel Cell power plants with carbon dioxide management: Technical and economic optimization

This article investigates the techno-economic performance of large integrated biogas Solid Oxide Fuel Cell (SOFC) power plants. Both atmospheric and pressurized operation is analysed with CO2 vented or captured. The SOFC module produces a constant electrical power of 1 MWe. Sensitivity analysis and multi-objective optimization are the mathematical tools used to investigate the effects of Fuel Utilization (FU), SOFC operating temperature and pressure on the plant energy and economic performances. FU is the design variable that most affects the plant performance. Pressurized SOFC with hybridization with a gas turbine provides a notable boost in electrical efficiency. For most of the proposed plant configurations, the electrical efficiency ranges in the interval 50e62% (LHV biogas) when a trade-off of between energy and economic performances is applied based on Pareto charts obtained from multi-objective plant optimization. The hybrid SOFC is potentially able to reach an effi- ciency above 70% when FU is 90%. Carbon capture entails a penalty of more 10 percentage points in pressurized configurations mainly due to the extra energy burdens of captured CO2 pressurization and oxygen production and for the separate and different handling of the anode and cathode exhausts and power recovery from them.

[1]  François Maréchal,et al.  Energy balance model of a SOFC cogenerator operated with biogas , 2003 .

[2]  I. Celik,et al.  Tolerance tests of H2S-laden biogas fuel on solid oxide fuel cells , 2010 .

[3]  Jan Van herle,et al.  Biogas as a fuel source for SOFC co-generators , 2004 .

[4]  M Caramia,et al.  Multi-objective Management in Freight Logistic , 2008 .

[5]  Robert J. Braun.  Techno-Economic Optimal Design of Solid Oxide Fuel Cell Systems for Micro-Combined Heat and Power Applications in the U.S. , 2010 .

[6]  I. Celik,et al.  Effects of coal syngas impurities on anodes of solid oxide fuel cells , 2008 .

[7]  Robert J. Braun,et al.  Techno-economic analysis of solid oxide fuel cell-based combined heat and power systems for biogas utilization at wastewater treatment facilities , 2013 .

[8]  Richard Newby,et al.  Techno-Economic Analysis of Natural Gas Fuel Cell Plant Configurations , 2011 .

[9]  B. Linnhoff,et al.  The pinch design method for heat exchanger networks , 1983 .

[10]  Martin Gassner,et al.  Osmose - User Manual version 2.0 , 2010 .

[11]  Aristide F. Massardo,et al.  Micro gas turbine thermodynamic and economic analysis up to 500kWe size , 2011 .

[12]  Richard Turton,et al.  Analysis, Synthesis and Design of Chemical Processes , 2002 .

[13]  Vincent Heuveline,et al.  Performance analysis of a SOFC under direct internal reforming conditions , 2007 .

[14]  Zacharie Wuillemin,et al.  Experimental and modeling investigations on local performance and local degradation in solid oxide fuel cells , 2009 .

[15]  Aristide F. Massardo,et al.  Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A—Cell Model and Cycle Thermodynamic Analysis , 2000 .

[16]  F. R. Foulkes,et al.  Fuel Cell Handbook , 1989 .

[17]  Shabbir Ahmed,et al.  Fuel quality issues with biogas energy – An economic analysis for a stationary fuel cell system , 2012 .

[18]  Tae Seok Lee,et al.  Design and optimization of a combined fuel reforming and solid oxide fuel cell system with anode off-gas recycling , 2011 .

[19]  Andrea Toffolo,et al.  Synthesis and parameter optimization of a combined sugar and ethanol production process integrated w , 2011 .

[20]  A. Faaij,et al.  Competitiveness of CO2 capture from an industrial solid oxide fuel cell combined heat and power system in the early stage of market introduction , 2011 .

[21]  François Maréchal,et al.  A methodology for thermo-economic modeling and optimization of solid oxide fuel cell systems , 2007 .

[22]  Alberto Traverso,et al.  Modelling of Pressurised Hybrid Systems Based on Integrated Planar Solid Oxide Fuel Cell (IP‐SOFC) Technology , 2005 .

[23]  Stephen J. Skinner,et al.  Functional materials for sustainable energy applications , 2012 .

[24]  L. Kershenbaum,et al.  Modelling of an indirect internal reforming solid oxide fuel cell , 2002 .

[25]  Aristide F. Massardo,et al.  Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine , 2001 .

[26]  Bernhard Tjaden,et al.  Small-Scale Biogas-SOFC Plant: Technical Analysis and Assessment of Different Fuel Reforming Options , 2014 .