The propagation of Lamb waves in a laminated composite plate with a variable stepped thickness

Abstract In this study Lamb waves propagating in a laminated composite plate with stepped thickness variance are characterized through experiments. Understanding the characteristics of Lamb waves is very important for developing a structural health monitoring system, as the number, size, and location of transducers should be determined at the structural design stage. Thin piezoelectric (PZT) transducers bonded to the surface were used for the generation and reception of Lamb waves. The influences of stepped thickness variance were investigated with measurement of group velocities and frequency analyses of the received signals. In addition, a mode analysis was conducted by a mutual transmitting–receiving method making use of the difference between the signals received from a pair of PZTs consisting of transmitter and receiver.

[1]  Hoon Sohn,et al.  Wavelet-based active sensing for delamination detection in composite structures , 2004 .

[2]  Seth S. Kessler,et al.  IN-SITU SENSOR-BASED DAMAGE DETECTION OF COMPOSITE MATERIALS FOR STRUCTURAL HEALTH MONITORING , 2002 .

[3]  Wei Zhao,et al.  Active sensor wave propagation health monitoring of beam and plate structures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Wing Kong Chiu,et al.  Integrity assessment of composite repair patch using propagating Lamb waves , 2002 .

[5]  Constantinos Soutis,et al.  Damage detection in composite materials using lamb wave methods , 2002 .

[6]  Martin Veidt,et al.  Single mode Lamb waves in composite laminated plates generated by piezoelectric transducers , 2002 .

[7]  Sébastien Grondel,et al.  Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques , 2002 .

[8]  Peter Cawley,et al.  The Potential of Guided Waves for Monitoring Large Areas of Metallic Aircraft Fuselage Structure , 2001 .

[9]  Peter T. Gardiner,et al.  Smart materials and structures: what are they? , 1996 .

[10]  M. Lemistre,et al.  Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing , 2001 .

[11]  E. Moulin,et al.  Health monitoring of a composite wingbox structure. , 2004, Ultrasonics.

[12]  G. Hayward,et al.  Generation and reception of ultrasonic guided waves in composite plates using conformable piezoelectric transmitters and optical-fiber detectors , 1999, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  A. Nayfeh.  The general problem of elastic wave propagation in multilayered anisotropic media , 1991 .

[14]  L. Ye,et al.  A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers , 2002 .

[15]  Y Cho,et al.  Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation. , 2000, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[16]  Francesco Lanza di Scalea,et al.  Propagation of ultrasonic guided waves in lap-shear adhesive joints: case of incident a0 Lamb wave. , 2004 .