System-Level Reliability Assessment of Mixed-Signal
暂无分享,去创建一个
G. Ramakrishna | Kevin M. Klein | Suresh K. Sitaraman | Krishna Tunga | Andy Perkins | Raghuram V. Pucha | S. Hegde | Manoj Damani | Sakethraman Mahalingam | George Lo | J. Ahmad | S. Sitaraman | R. Pucha | A. Perkins | K. Tunga | S. Hegde | G. Lo | S. Mahalingam | G. Ramakrishna | M. Damani | K. Klein | J. Ahmad
[1] J. Murphy,et al. The Quality of Die-Attachment and Its Relationship to Stresses and Vertical Die-Cracking , 1983 .
[2] Scott R. White,et al. Process Modeling of Composite Materials: Residual Stress Development during Cure. Part II. Experimental Validation , 1992 .
[3] John W. Gillespie,et al. Process-Induced Stress and Deformation in Thick-Section Thermoset Composite Laminates , 1992 .
[4] Karl W. Wyatt,et al. An Interfacial Delamination Analysis for Multichip Module Thin Film Interconnects , 1996 .
[5] J. Lau,et al. Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMT Assemblies , 1996 .
[6] A.M.R. Witwit,et al. Thermal simulation of PCBs with embedded resistors , 1998 .
[7] S. F. Popelar. An investigation into the fracture of silicon die used in flip chip applications , 1998, Proceedings. 4th International Symposium on Advanced Packaging Materials Processes, Properties and Interfaces (Cat. No.98EX153).
[8] Xuejun Fan,et al. Investigation of the underfill delamination and cracking in flip-chip modules under temperature cyclic loading , 1999, 1999 Proceedings. 49th Electronic Components and Technology Conference (Cat. No.99CH36299).
[9] Jichai Jeong,et al. Estimation of system reliability for uncooled optical transmitters using system reliability function , 1999 .
[10] Suresh K. Sitaraman,et al. Die cracking and reliable die design for flip-chip assemblies , 1999, ECTC 1999.
[11] Huajian Gao,et al. Mechanism-based strain gradient plasticity— I. Theory , 1999 .
[12] Ephraim Suhir. Microelectronics and photonics-the future , 2000 .
[13] Suresh K. Sitaraman,et al. An integrated process modeling methodology and module for sequential multi-layered substrate fabrication using a coupled cure-thermal-stress analysis approach , 2000, ECTC 2000.
[14] Shaohua Chen,et al. A new hardening law for strain gradient plasticity , 2000 .
[15] Yang Rao,et al. Investigation of the curing behavior of a novel epoxy photo-dielectric dry film (ViaLux™ 81) for high density interconnect applications , 2000 .
[16] S. Bhattacharya,et al. Selection and evaluation of materials for future system-on-package (SOP) substrate , 2001, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220).
[17] Ying Zhao,et al. Experimental Damage Mechanics of Microelectronics Solder Joints under Concurrent Vibration and Thermal Loading , 2001 .
[18] B. Michel,et al. Interfacial fracture toughness tests suited for reliability enhancements of advanced plastic packages , 2001, First International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics. Incorporating POLY, PEP & Adhesives in Electronics. Proceedings (Cat. No.01TH8592).
[19] Suresh K. Sitaraman,et al. Damage Metric-Based Mapping Approaches for Developing Accelerated Thermal Cycling Guidelines for Electronic Packages , 2001 .
[20] Suresh K. Sitaraman,et al. Cure kinetics modeling and process optimization of the vialux 81 epoxy photodielectric dry film (PDDF) material for microvia applications , 2002 .
[21] R. Pucha,et al. Thermomechanical reliability of underfilled BGA packages , 2002 .
[22] Suresh K. Sitaraman,et al. Modeling methodologies to study PWB assembly reliability , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).
[23] J.D. van Wyk,et al. Investigation of thermally induced failure mechanisms in integrated spiral planar power passives , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).
[24] Fuhan Liu,et al. Experimental and numerical investigation of microvia reliability , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).
[25] Martin A. Brooke,et al. Comparison of evanescent and directly coupled optical interconnections embedded into electronic interconnection substrates , 2002, The 15th Annual Meeting of the IEEE Lasers and Electro-Optics Society.
[26] Fuhan Liu,et al. Fabrication of ultra-fine line circuits on PWB substrates , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).
[27] G. Ramakrishna,et al. Material Interaction Effects in the Reliability of High Density Interconnect (HDI) Boards , 2003 .
[28] Suresh K. Sitaraman,et al. Investigation of interfacial delamination of a copper-epoxy interface under monotonic and cyclic loading: modeling and evaluation , 2003 .
[29] Suresh K. Sitaraman,et al. Elastic–plastic characterization of thin films using nanoindentation technique , 2003 .
[30] Qi Zhu,et al. Design optimization of one-turn helix: a novel compliant off-chip interconnect , 2003 .
[31] Andrew A. O. Tay,et al. A study of delamination growth in the die-attach layer of plastic IC packages under hygrothermal loading during solder reflow , 2003 .
[32] Suresh K. Sitaraman,et al. Enhanced reliability of high-density wiring (HDW) substrates through new base substrate and dielectric materials , 2004 .
[33] Suresh K. Sitaraman,et al. Interfacial fracture toughness measurement for thin film interfaces , 2004 .
[34] S. Sitaraman,et al. Vibration-induced solder joint failure of a Ceramic Column Grid Array (CCGA) package , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).
[35] G. Ramakrishna,et al. Modeling spatial strain gradient effects in thermo-mechanical fatigue of copper microstructures , 2004 .