An overview of theory and practice on process capability indices for quality assurance

Process capability indices (PCIs), Cp, Ca, Cpk, Cpm, and Cpmk have been developed in certain manufacturing industry as capability measures based on various criteria, including process consistency, process departure from a target, process yield, and process loss. It is noted in certain recent quality assurance and capability analysis works that the three indices, Cpk, Cpm, and Cpmk provide the same lower bounds on the process yield. In this paper, we investigate the behavior of the actual process yield, in terms of the number of non-conformities (in ppm), for processes with fixed index values of Cpk=Cpm=Cpmk, possessing different degrees of process centering. We also extend Johnson's [1992. The relationship of Cpm to squared error loss. Journal of Quality Technology 24, 211-215] result formulating the relationship between the expected relative squared loss and PCIs. Also a comparison analysis among PCIs is carried out based on various criteria. The result illustrates some advantages of using the index Cpmk over the indices Cpk and Cpm in measuring process capability (yield and loss), since Cpmk always provides a better protection for the customers. Additionally, several extensions and applications to real world problem are also discussed. The paper contains some material presented in the Kotz and Johnson [2002. Process capability indices--a review, 1992-2000. Journal of Quality Technology 34(1), 1-19] survey but from a different perspective. It also discusses the more recent developments during the years 2002-2006.

[1]  Rong-Kwei Li,et al.  Process capability analysis for an entire product , 2001 .

[2]  T. Du,et al.  Using principal component analysis in process performance for multivariate data , 2000 .

[3]  Samuel Kotz,et al.  Process Capability Indices , 1993 .

[4]  W. Pearn,et al.  An application of non‐normal process capability indices , 1997 .

[5]  Donald B. Owen,et al.  Lower confidence limits on process capability indices based on the range , 1990 .

[6]  R. A. Boyles.  Multivariate process analysis with lattice data , 1996 .

[7]  W. L. Pearn,et al.  New generalization of process capability index Cpk , 1998 .

[8]  R. A. Boyles.  Brocess capability with asymmetric tolerances , 1994 .

[9]  Wen Lea Pearn,et al.  A NEW GENERALIZATION OF Cpm FOR PROCESSES WITH ASYMMETRIC TOLERANCES , 1999 .

[10]  J. Berger.  Statistical Decision Theory and Bayesian Analysis , 1988 .

[11]  Wen Lea Pearn,et al.  Lower confidence bounds with sample size information for Cpm applied to production yield assurance , 2003 .

[12]  Kerstin Vännman,et al.  Distributional properties of estimated capability indices based on subsamples , 2003 .

[13]  Karen L. Jensen,et al.  Concepts for R&R Studies , 2002 .

[14]  Russell A. Boyles,et al.  The Taguchi capability index , 1991 .

[15]  Youn Min Chou,et al.  SELECTING A BETTER SUPPLIER BY TESTING PROCESS CAPABILITY INDICES , 1994 .

[16]  William H. Woodall,et al.  Introduction to Statistical Quality Control, Fifth Edition , 2005 .

[17]  Sy-Mien Chen,et al.  The asymptotic distribution of the process capability index Cpmk , 1995 .

[18]  David M. Lyth,et al.  Critical Variables in Wood Manufacturing's Process Capability: Species, Structure, and Moisture Content , 1995 .

[19]  W. Pearn,et al.  Capability indices for non-normal distributions with an application in electrolytic capacitor manufacturing , 1997 .

[20]  Samuel Kotz,et al.  A superstructure of capability indices : distributional properties and implications , 1995 .

[21]  Shanti S. Gupta,et al.  Multiple decision procedures - theory and methodology of selecting and ranking populations , 1979, Classics in applied mathematics.

[22]  Wen Lea Pearn,et al.  APPLICATION OF CLEMENTS' METHOD FOR CALCULATING SECOND- AND THIRD-GENERATION PROCESS CAPABILITY INDICES FOR NON-NORMAL PEARSONIAN POPULATIONS , 1994 .

[23]  Connie M. Borror,et al.  A Review of Methods for Measurement Systems Capability Analysis , 2003 .

[24]  G. R. Tang,et al.  Tolerance design for products with asymmetric quality losses , 1998 .

[25]  G. D. Taylor,et al.  Process capability analysis—a robustness study , 1993 .

[26]  W. L. Pearn,et al.  Measuring process capability based on CPK with gauge measurement errors , 2005, Microelectron. Reliab..

[27]  Victor E. Kane,et al.  Process Capability Indices , 1986 .

[28]  Wen Lea Pearn,et al.  Measuring manufacturing capability for couplers and wavelength division multiplexers , 2005 .

[29]  Wen Lea Pearn,et al.  AN IMPLEMENTATION OF THE PRECISION INDEX FOR CONTAMINATED PROCESSES , 1998 .

[30]  Haim Shore.  A new approach to analysing non-normal quality data with application to process capability analysis , 1998 .

[31]  Loon Ching Tang,et al.  Computing process capability indices for non‐normal data: a review and comparative study , 1999 .

[32]  Wen Lea Pearn,et al.  Some Process Capability Indices are More Reliable than One Might Think , 1993 .

[33]  Robert N. Rodriguez.  Recent Developments in Process Capability Analysis , 1992 .

[34]  Samuel Kotz,et al.  Process Capability Indices—A Review, 1992–2000 , 2002 .

[35]  Charles P. Quesenberry,et al.  An SPC Approach to Compensating a Tool-Wear Process , 1988 .

[36]  Kerstin Vännman,et al.  Process capability plots—a quality improvement tool , 1999 .

[37]  Winson Taam,et al.  SOME APPLICATIONS OF A MULTIVARIATE CAPABILITY INDEX IN GEOMETRIC DIMENSIONING AND TOLERANCING , 1994 .

[38]  Wen Lea Pearn,et al.  Capability Testing Based on Cpm with Multiple Samples , 2005 .

[39]  F. Wang,et al.  Capability Index Using Principal Components Analysis , 1998 .

[40]  James W. Liddy,et al.  A note on multivariate capability indices , 1993 .

[41]  Youn Min Chou,et al.  Transforming Non-Normal Data to Normality in Statistical Process Control , 1998 .

[42]  Youn Min Chou,et al.  Lower confidence limits on process capability indices. , 1990 .

[43]  Samuel Kotz,et al.  Delicate relations among the basic process capability indices cp, Cpk AND Cpm, AND THEIR MODIFICATIONS , 1999 .

[44]  Deng-Yuan Huang,et al.  Selecting the largest capability index from several quality control processes , 1995 .

[45]  Douglas C. Montgomery,et al.  AN APPLICATION OF STATISTICAL PROCESS CONTROL IN JET-TURBINE ENGINE COMPONENT MANUFACTURING , 1991 .

[46]  Robert H. Kushler,et al.  Confidence Bounds for Capability Indices , 1992 .

[47]  Claus Weihs,et al.  A Note on the Behavior of Cpmk with Asymmetric Specification Limits , 2000 .

[48]  Kuen-Suan Chen.  Incapability index with asymmetric tolerances , 1998 .

[49]  Peter A. Wright.  A process capability index sensitive to skewness , 1995 .

[50]  N. L. Johnson,et al.  Systems of frequency curves generated by methods of translation. , 1949, Biometrika.

[51]  Byoung-Chul Choi,et al.  A study of a new process capability index , 1990 .

[52]  Charles W. Champ.  Introduction to Statistical Quality Control, Fourth Edition , 2001 .

[53]  Subhash C. Singhal.  A NEW CHART FOR ANALYZING MULTIPROCESS PERFORMANCE , 1990 .

[54]  Feng-Bin Sun,et al.  On Spiring's normal loss function , 1996 .

[55]  Subrahmaniam Kocherlakota,et al.  Estimation of σ and the process capability index based on subsamples , 1991 .

[56]  Wen Lea Pearn,et al.  Distributional and inferential properties of the process accuracy and process precision indices , 1998 .

[57]  W. L. Pearn,et al.  Measuring process yield based on the capability index Cpm , 2004 .

[58]  Fred A. Spiring,et al.  A Bibliography of Process Capability Papers , 2003 .

[59]  Chien-Wei Wu.  Assessing process capability based on Bayesian approach with subsamples , 2008, Eur. J. Oper. Res..

[60]  Wen Lea Pearn,et al.  Computer program for calculating the p‐value in testing process capability index Cpmk , 2002 .

[61]  Norma Faris Hubele,et al.  Confidence intervals and sample size determination for Cpm , 2001 .

[62]  Fred A. Spiring,et al.  A New Measure of Process Capability: Cpm , 1988 .

[63]  W. L. Pearn,et al.  Testing process performance based on the yield: an application to the liquid-crystal display module , 2002, Microelectron. Reliab..

[64]  Norma Faris Hubele,et al.  QUANTILES OF THE SAMPLING DISTRIBLITION OF C , 1997 .

[65]  Walton M. Hancock,et al.  Statistical quality control for correlated samples , 1990 .

[66]  Wen Lea Pearn,et al.  Flexible process capability indices , 1992 .

[67]  W. L. Pearn,et al.  Testing process performance based on capability index Cpk with critical values , 2004, Comput. Ind. Eng..

[68]  Douglas C. Montgomery,et al.  PROCESS CAPABILITY INDICES AND NON-NORMAL DISTRIBUTIONS , 1996 .

[69]  Yasushi Nagata,et al.  APPROXIMATION FORMULAS FOR THE LOWER CONFIDENCE LIMITS OF PROCESS CAPABILITY INDICES , 1994 .

[70]  Shanti S. Gupta,et al.  Multiple Statistical Decision Theory: Recent Developments , 1981 .

[71]  Hamid Shahriari,et al.  A New Multivariate Process Capability Vector , 2009 .

[72]  Joseph Moses Juran,et al.  Quality-control handbook , 1951 .

[73]  Kuen-Suan Chen,et al.  Comparing the Capability of Two Processes Using Cpm , 2004 .

[74]  Fred A. Spiring.  Assessing Process Capability in the Presence of Systematic Assignable Cause , 1991 .

[75]  Fred A. Spiring,et al.  A General Class of Loss Functions with Industrial Applications , 1998 .

[76]  Fred A. Spiring,et al.  A multivariate measure of process capability , 1991 .

[77]  Kerstin Vännman,et al.  The Effect of Pooled and Un-Pooled Variance Estimators on Cpm When Using Subsamples , 2004 .

[78]  Philippe Castagliola,et al.  Evaluation of Non-Normal Process Capability Indices Using Burr's Distributions , 1996 .

[79]  Subhash C. Singhal,et al.  Multiprocess Performance Analysis Chart (MPPAC) With Capability Zones , 1991 .

[80]  Fred A. Spiring,et al.  The reflected normal loss function , 1993 .

[81]  Wen Lea Pearn,et al.  Multiprocess Performance Analysis: A Case Study , 1997 .

[82]  Fu-Kwun Wang,et al.  Comparison of Three Multivariate Process Capability Indices , 2000 .

[83]  Mark A. McComb.  Measuring Process Capability , 1998 .

[84]  Lorrie L. Hoffman.  Obtaining confidence intervals for Cpk using percentiles of the distribution of Ĉp , 2001 .

[85]  Wen Lea Pearn,et al.  A Bayesian approach for assessing process precision based on multiple samples , 2005, Eur. J. Oper. Res..

[86]  Thomas E. Johnson,et al.  The Relationship of Cpm to Squared Error Loss , 1992 .

[87]  Thomas P. Ryan,et al.  The estimation of sigma for an X chart: MR/d2 or S/c4? , 1990 .

[88]  D. Montgomery,et al.  GAUGE CAPABILITY ANALYSIS AND DESIGNED EXPERIMENTS. PART II: EXPERIMENTAL DESIGN MODELS AND VARIANCE COMPONENT ESTIMATION , 1993 .

[89]  N. L. Johnson,et al.  Distributional and Inferential Properties of Process Capability Indices , 1992 .

[90]  Peter A. Wright.  The probability density function of process capability index Cpmk , 1998 .

[91]  Kerstin Vännman.  Distribution and moments in simplified form for a general class of capability indices , 1997 .

[92]  Lora S. Zimmer,et al.  Process Capability Indices in Theory and Practice , 2000, Technometrics.

[93]  Chien-Wei Wu,et al.  Assessing process capability based on the lower confidence bound of Cpk for asymmetric tolerances , 2008, Eur. J. Oper. Res..

[94]  Samuel Kotz,et al.  A new process capability index , 1997 .

[95]  Peter A. Wright.  The cumulative distribution function of process capability index Cpm , 2000 .

[96]  Loon Ching Tang,et al.  A Graphical Approach to Obtaining Confidence Limits of Cpk , 1997 .

[97]  N. F. Zhang,et al.  Interval estimation of process capability index Cpk , 1990 .

[98]  배도선,et al.  비대칭 모집단에 대한 공정능력지수의 개발 ( Process Capability Indices for Skewed Populations ) , 2000 .

[99]  Chien-Wei Wu,et al.  An alternative approach to test process capability for unilateral specification with subsamples , 2007 .

[100]  Douglas C. Montgomery,et al.  Introduction to Statistical Quality Control , 1986 .

[101]  Douglas C. Montgomery,et al.  GAUGE CAPABILITY AND DESIGNED EXPERIMENTS. PART I: BASIC METHODS , 1993 .

[102]  Kwok-Leung Tsui,et al.  A review and interpretations of process capability indices , 1999, Ann. Oper. Res..

[103]  H. Mittag.  Measurement Error Effects on the Performance of Process Capability Indices , 1997 .

[104]  J. Mandel.  Repeatability and Reproducibility , 1972 .

[105]  Kerstin Vännman,et al.  A uniformed approach to capability indices , 1995 .

[106]  Sheng-Tsaing Tseng,et al.  Selecting the best manufacturing process , 1991 .

[107]  Wen Lea Pearn,et al.  Quality yield measure for processes with asymmetric tolerances , 2006 .

[108]  L. Franklin,et al.  Bootstrap Lower Confidence Limits for Capability Indices , 1992 .

[109]  Wen Lea Pearn,et al.  Procedure for supplier selection based on Cpm applied to super twisted nematic liquid crystal display processes , 2004 .

[110]  Wen Lea Pearn,et al.  Distributional and Inferential Properties of the Process Loss Indices , 2004 .

[111]  Esma S. Gel,et al.  A Wald Test for Comparing Multiple Capability Indices , 2005 .

[112]  Davis R. Bothe.  Measuring Process Capability: Techniques and Calculations for Quality and Manufacturing Engineers , 1997 .

[113]  G. C. Tiao,et al.  Bayesian inference in statistical analysis , 1973 .

[114]  LeRoy A. Franklin,et al.  Sample size determination for lower confidence limits for estimating process capability indices , 1999 .

[115]  I. Olkin,et al.  Selecting and Ordering Populations: A New Statistical Methodology , 1977 .