Excitation System Technologies for Wound-Field Synchronous Machines: Survey of Solutions and Evolving Trends

WFSM are included in the majority of large power generating units and special high-power motor drives, due to their high efficiency, flexible field excitation and intrinsic flux weakening capability. Moreover, they are employed in a wide range of high-end solutions in the low-to-medium power range. This contribution presents a comprehensive survey of classical and modern methods and technologies for excitation systems (ESs) of (WFSMs). The work covers the fundamental theory, typical de-excitation methods and all the modern excitation equipment topologies in detail. It also includes a description of the state-of-the-art and the latest trends in the ESs of wound-field synchronous motors and generators. The purpose of the paper is to provide a useful and up-to-date reference for practitioners and researchers in the field.

[1]  Hiroshi Takami,et al.  Low-Speed Drive of PWM-VSI-Fed Brushless Self-Excited Synchronous Motor , 1986, IEEE Transactions on Industry Applications.

[2]  Hamed Gorginpour,et al.  Optimal design of brushless AC exciter for large synchronous generators considering grid codes requirements , 2018, IET Generation, Transmission & Distribution.

[3]  Chandan Chakraborty,et al.  Brushless Induction Excited Synchronous Generator With Induction Machine Operating in Plugging Mode , 2018, IEEE Transactions on Industry Applications.

[4]  Daniel Dos Santos Mota,et al.  Estimating the Frequency Response of an Excitation System and Synchronous Generator: Sinusoidal Disturbances Versus Empirical Transfer Function Estimate , 2018, IEEE Power and Energy Technology Systems Journal.

[5]  I.A. Gibbs.  Testing of active current balance in parallel thyristor bridges , 2005, IEEE Transactions on Energy Conversion.

[6]  Seung-Ki Sul,et al.  A new generator static excitation system using boost-buck chopper , 1996, Proceedings of the 1996 IEEE IECON. 22nd International Conference on Industrial Electronics, Control, and Instrumentation.

[7]  Liisa Haarla,et al.  Self-Excitation of a Synchronous Generator During Power System Restoration , 2019, IEEE Transactions on Power Systems.

[8]  Kiyong Kim,et al.  Self-Tuning of the PID Controller for a Digital Excitation Control System , 2010 .

[9]  S. Khan.  Application aspects of generator and excitation system for process plants , 1998, Conference Record of 1998 Annual Pulp and Paper Industry Technical Conference (Cat. No.98CH36219).

[10]  T. Fukami,et al.  An exciterless and brushless type commutatorless motor fed from a transformer in parallel with a voltage source inverter , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[11]  A. Di Gioia,et al.  Design and Demonstration of a Wound Field Synchronous Machine for Electric Vehicle Traction With Brushless Capacitive Field Excitation , 2018, IEEE Transactions on Industry Applications.

[12]  Fredrik Evestedt,et al.  Active Current Sharing Control Method for Rotating Thyristor Rectifiers on Brushless Dual-Star Exciters , 2018, IEEE Transactions on Energy Conversion.

[13]  T. Siebert,et al.  AC to DC power conversion now and in the future , 2001, Record of Conference Papers. IEEE incorporated Industry Applications Society. Forty-Eighth Annual Conference. 2001 Petroleum and Chemical Industry Technical Conference (Cat. No.01CH37265).

[14]  Geoff Klempner,et al.  Principles of Operation of Synchronous Machines , 2004 .

[15]  Carlos Platero,et al.  Internal sudden short-circuit response of a new HSBDS for brushless synchronous machines tested on a 15 MVA generator , 2017 .

[16]  Nimananda Sharma,et al.  Modeling and Experimental Verification of High-Frequency Inductive Brushless Exciter for Electrically Excited Synchronous Machines , 2019, IEEE Transactions on Industry Applications.

[17]  S. Tnani,et al.  Monovariable and Multivariable Voltage Regulator Design for a Synchronous Generator Modeled With Fixed and Variable Loads , 2011, IEEE Transactions on Energy Conversion.

[18]  Richard C. Schaefer,et al.  Excitation control of the synchronous generator , 2001 .

[19]  F.C. Trutt,et al.  Condition monitoring of brushless three-phase synchronous generators with stator winding or rotor circuit deterioration , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[20]  T. L. Dillman,et al.  Brushless excitation , 1972, IEEE Spectrum.

[21]  R.C. Schaefer,et al.  Excitation control of the synchronous motor , 1998, Conference Record of 1998 Annual Pulp and Paper Industry Technical Conference (Cat. No.98CH36219).

[22]  Juan A. Tapia,et al.  Feasibility of an Armature-Reaction-Compensated Permanent-Magnet Synchronous Generator in Island Operation , 2014, IEEE Transactions on Industrial Electronics.

[23]  Zebin Yang,et al.  High-Performance Control for a Bearingless Permanent-Magnet Synchronous Motor Using Neural Network Inverse Scheme Plus Internal Model Controllers , 2016, IEEE Transactions on Industrial Electronics.

[24]  Michael Galea,et al.  Electrical Power Generation in Aircraft: Review, Challenges, and Opportunities , 2018, IEEE Transactions on Transportation Electrification.

[25]  Johan Abrahamsson,et al.  Testing of Active Rectification Topologies on a Six-Phase Rotating Brushless Outer Pole PM Exciter , 2018, IEEE Transactions on Energy Conversion.

[26]  Johan Abrahamsson,et al.  Design and Characterization of a Rotating Brushless Outer Pole PM Exciter for a Synchronous Generator , 2017, IEEE Transactions on Industry Applications.

[27]  Johan Abrahamsson,et al.  Evaluation of different power electronic interfaces for control of a rotating brushless PM exciter , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[28]  J. K. NØland,et al.  Continuous Evolution and Modern Approaches of Excitation Systems for Synchronous Machines , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[29]  M. Baldwin,et al.  High-Response Excitation Systems on Turbine-Generators: A Stability Assessment , 1982, IEEE Transactions on Power Apparatus and Systems.

[30]  Ehsan Abdi,et al.  Energy Harvesting and Wireless Data Transmission System for Rotor Instrumentation in Electrical Machines , 2017 .

[31]  Ningfei Jiao,et al.  Steady-state performance evaluations of three-phase brushless asynchronous excitation system for aircraft starter/generator , 2016 .

[32]  R.C. Schaefer,et al.  Tuning a PID controller for a digital excitation control system , 2005, IEEE Transactions on Industry Applications.

[33]  Mahit Gunes,et al.  Fuzzy Control of Brushless Excitation System for Steam Turbogenerators , 2010, IEEE Transactions on Energy Conversion.

[34]  A. Mertens,et al.  Rotary Transformer Design for Brushless Electrically Excited Synchronous Machines , 2015, 2015 IEEE Vehicle Power and Propulsion Conference (VPPC).

[35]  Chris Gerada,et al.  Analysis, Modeling, and Design Considerations for the Excitation Systems of Synchronous Generators , 2018, IEEE Transactions on Industrial Electronics.

[36]  R.C. Schaefer,et al.  NERC power industry policies , 2004, IEEE Industry Applications Magazine.

[37]  Byung-Il Kwon,et al.  Fault-Tolerant Operation of Wound Field Synchronous Machine Using Coil Switching , 2019, IEEE Access.

[38]  Urban Lundin,et al.  Comparison of Thyristor-Controlled Rectification Topologies for a Six-Phase Rotating Brushless Permanent Magnet Exciter , 2016, IEEE Transactions on Energy Conversion.

[39]  Alberto Tessarolo,et al.  Start-Up Performance Prediction of Line-Fed Solid-Rotor Salient-Pole Synchronous Motors , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[40]  Palle Andersen,et al.  Supervisory Control Implementation on Diesel-Driven Generator Sets , 2018, IEEE Transactions on Industrial Electronics.

[41]  Fredrik Evestedt,et al.  Failure Modes Demonstration and Redundant Postfault Operation of Rotating Thyristor Rectifiers on Brushless Dual-Star Exciters , 2019, IEEE Transactions on Industrial Electronics.

[42]  C. W. Taylor,et al.  Transient excitation boosting at Grand Coulee Third Power plant: power system application and field tests , 1993 .

[43]  Sakutaro Nonaka,et al.  Analysis of voltage-adjustable brushless synchronous generator without exciter , 1989 .

[44]  Johan Abrahamsson,et al.  Comparison of Thyristor Rectifier Configurations for a Six-Phase Rotating Brushless Outer Pole PM Exciter , 2018, IEEE Transactions on Industrial Electronics.

[45]  Eduardo P. Wiechmann,et al.  Large current rectifiers: State of the art and future trends , 2005, IEEE transactions on industrial electronics (1982. Print).

[46]  Chung-Yuen Won,et al.  Output voltage control of a synchronous generator for ships using compound type digital AVR , 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

[47]  W. F. Wright,et al.  Brushless Thyristor Excitation Systems. , 1972 .

[48]  U. Lundin,et al.  Demonstration of Synchronous Motor Start by Rotor Polarity Inversion , 2018, IEEE Transactions on Industrial Electronics.

[49]  Weiguo Liu,et al.  Decoupling control for aircraft brushless wound-rotor synchronous starter-generator in the starting mode , 2018 .

[50]  Sakutaro Nonaka,et al.  Analysis of Brushless Three-Phase Synchronous Generator Without Exciter , 1992 .

[51]  R.J. Best,et al.  Synchronous Islanded Operation of a Diesel Generator , 2007, IEEE Transactions on Power Systems.

[52]  Luis Rouco,et al.  Modeling, Sizing, and Control of an Excitation Booster for Enhancement of Synchronous Generators Fault Ride-Through Capability: Experimental Validation , 2016, IEEE Transactions on Energy Conversion.

[53]  Tadashi Fukami,et al.  A Brushless and Exciterless Polyphase Synchronous Motor , 1987, IEEE Transactions on Energy Conversion.

[54]  R. C. Schaefer.  Applying static excitation systems , 1998 .

[55]  Lawrence R. Roche.  A harmonic excitation system for turbine-generators , 1962, Electrical Engineering.

[56]  Mohamed El Hadi Zaïm,et al.  Rotating Electrical Machines: Le Doeuf/Rotating Electrical Machines , 2013 .

[57]  F. R. Blanquez,et al.  Improved high-speed de-excitation system for brushless synchronous machines tested on a 20 MVA hydro-generator , 2015 .

[58]  T. L. Dillman,et al.  A High Initial Response Brushless Excitation System , 1971 .

[59]  Jianguo Zhu,et al.  State Feedback Control for a PM Hub Motor Based on Gray Wolf Optimization Algorithm , 2020, IEEE Transactions on Power Electronics.

[60]  Antonio Griffo,et al.  Design and Characterization of a Three-Phase Brushless Exciter for Aircraft Starter/Generator , 2013, IEEE Transactions on Industry Applications.

[61]  Ian P. Brown,et al.  Synchronous Generator Brushless Field Excitation and Voltage Regulation via Capacitive Coupling Through Journal Bearings , 2017, IEEE Transactions on Industry Applications.

[62]  C. A. Stigers,et al.  Field Tests and Simulation of a High Initial Response Brushless Excitation System , 1986, IEEE Transactions on Energy Conversion.

[63]  Kashem M. Muttaqi,et al.  A New Method to Determine the Activation Time of the Overexcitation Limiter Based on Available Generator Rotor Thermal Capacity for Improving Long-Term Voltage Instability , 2017, IEEE Transactions on Power Systems.

[64]  Weiguo Liu,et al.  Design and Control of a Two-Phase Brushless Exciter for Aircraft Wound-Rotor Synchronous Starter/Generator in the Starting Mode , 2016, IEEE Transactions on Power Electronics.

[65]  Urban Lundin,et al.  Electromagnetic Losses in Synchronous Machines During Active Compensation of Unbalanced Magnetic Pull , 2019, IEEE Transactions on Industrial Electronics.

[66]  J. Taborda.  Modern technical aspects of Field Discharge equipment for excitation systems , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[67]  T. Kawaguchi,et al.  Excitation scheme of brushless self-excited type three-phase synchronous machine , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[68]  D.-H. Lee.  Design and direct field current control scheme of a synchronous generator with PM exciter based on the reference frequency , 2019 .

[69]  K. Sedlazeck,et al.  Type testing a 2000 MW turbogenerator , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[70]  Luis Rouco,et al.  Lyapunov Stability Based Wide Area Control Systems for Excitation Boosters in Synchronous Generators , 2019, IEEE Transactions on Power Systems.

[71]  T. Kawaguchi,et al.  A new variable-speed AC generator system using brushless self-excited type synchronous machine , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[72]  Fredrik Evestedt,et al.  Improving the functionality of synchronous machines using power electronics , 2017 .

[73]  Richard C. Schaefer.  Specifying excitation systems for procurement , 2010, Conference Record of 2010 Annual Pulp & Paper Industry Technical Conference.

[74]  A. Domijan,et al.  Optimizing AC-exciter design , 1996 .

[75]  Kenji Inoue,et al.  A brushless self-exciting three-phase synchronous generator utilizing the 5th-space harmonic component of magneto motive force through armature currents , 1992 .

[76]  Saptarshi Basak,et al.  Synchronous Generator With Embedded Brushless Synchronous Exciter , 2019, IEEE Transactions on Energy Conversion.

[77]  Mosad M. El Missiry.  Excitation Control of a Brushless Synchronous Motor , 1984 .

[78]  IEEE Report,et al.  Excitation System Models for Power System Stability Studies , 1981, IEEE Transactions on Power Apparatus and Systems.

[79]  Jung-Ik Ha,et al.  Control of a Synchronous Motor With an Inverter Integrated Rotor , 2012, IEEE Transactions on Industry Applications.

[80]  Cai Bochong,et al.  Research on an online diagnosis for rotating diode faults in three‐phase brushless exciter with two coils , 2018, IET Electric Power Applications.

[81]  Weiguo Liu,et al.  Field Current Estimation for Wound-Rotor Synchronous Starter–Generator With Asynchronous Brushless Exciters , 2017, IEEE Transactions on Energy Conversion.

[82]  Weiguo Liu,et al.  Rotor Position Estimation of Brushless Synchronous Starter/Generators by Using the Main Exciter as a Position Sensor , 2020, IEEE Transactions on Power Electronics.

[83]  Chandan Chakraborty,et al.  Performance of Brushless Induction Excited Synchronous Generator , 2019, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[84]  Jean-Pierre Ducreux,et al.  Simulation of a Large Power Brushless Synchronous Generator (BLSG) With a Rotating Rectifier by a Reluctance Network for Fault Analysis and Diagnosis , 2016, IEEE Transactions on Industry Applications.

[85]  Alessandro Costabeber,et al.  Power quality improvement by pre-computed modulated field current for synchronous generators , 2017, 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD).

[86]  Chris Gerada,et al.  A Methodology to Remove Stator Skew in Small–Medium Size Synchronous Generators via Innovative Damper Cage Designs , 2019, IEEE Transactions on Industrial Electronics.

[87]  Thomas A. Lipo,et al.  Principle of Operation and Performance of a Synchronous Machine Employing a New Harmonic Excitation Scheme , 2015, IEEE Transactions on Industry Applications.

[88]  Pranesh Rao,et al.  Coordination of digital excitation system settings for reliable operation , 2011, PPIC 2011.

[89]  Johan Abrahamsson,et al.  Design and characterization of a rotating brushless PM exciter for a synchronous generator test setup , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[90]  Thomas A. Lipo,et al.  Performance Investigation of a Brushless Synchronous Machine With Additional Harmonic Field Windings , 2016, IEEE Transactions on Industrial Electronics.

[91]  Thomas A. Lipo,et al.  Novel Brushless Wound Rotor Synchronous Machine With Zero-Sequence Third-Harmonic Field Excitation , 2016, IEEE Transactions on Magnetics.

[92]  P. Kundur,et al.  Static exciter control to improve transient stability , 1975, IEEE Transactions on Power Apparatus and Systems.

[93]  W. F. Wright,et al.  Review of trends in excitation systems and possible future developments , 1976 .

[94]  M. Shan Griffith.  Modem AC Generator Control Systems: Some Plain and Painless Facts , 1978, IEEE Transactions on Industry Applications.

[95]  Qianqian Ma,et al.  An Online Diagnostic Method for Rotary Diode Open-Circuit Faults in Brushless Exciters , 2018, IEEE Transactions on Energy Conversion.

[96]  Alessandra Costanzo,et al.  A 1-kW Contactless Energy Transfer System Based on a Rotary Transformer for Sealing Rollers , 2014, IEEE Transactions on Industrial Electronics.

[97]  Seung-Ki Sul,et al.  Sensorless Control of Synchronous Machine With an Inverter Integrated Rotor , 2013, IEEE Transactions on Industry Applications.

[98]  R. Thornton-Jones,et al.  Review of generator and excitation system specification and test requirements to satisfy multiple international grid code standards , 2012, 2012 IEEE Power and Energy Society General Meeting.

[99]  I. A. Gibbs,et al.  Active current balance between parallel thyristors in multi-bridge AC-DC rectifiers , 2001 .

[100]  Yujing Liu,et al.  Design and Experimental Verification of a 48 V 20 kW Electrically Excited Synchronous Machine for Mild Hybrid Vehicles , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[101]  Nobuyuki Naoe,et al.  A Brushless, Exciterless, Single-Phase, Sinusoidal Wave Synchronous Machine Having an Auxiliary Stator Winding , 1989, IEEE Power Engineering Review.

[102]  Urban Lundin,et al.  Step time response evaluation of different synchronous generator excitation systems , 2016, 2016 IEEE International Energy Conference (ENERGYCON).

[103]  Zebin Yang,et al.  Internal Model Control for a Bearingless Permanent Magnet Synchronous Motor Based on Inverse System Method , 2016, IEEE Transactions on Energy Conversion.

[104]  Pragasen Pillay,et al.  Hysteresis-Dependent Model for the Brushless Exciter of Synchronous Generators , 2015, IEEE Transactions on Energy Conversion.

[105]  A Tessarolo,et al.  Design and testing of a 45-MW 100-Hz quadruple-star synchronous motor for a Liquefied Natural Gas turbo-compressor drive , 2010, SPEEDAM 2010.

[106]  Juha Pyrhonen,et al.  Modelling the brushless excitation system for a synchronous machine , 2009 .

[107]  Guangzhao Luo,et al.  Design and Implementation of Parameter Estimation and Start Control of Brushless Synchronous Starter/Generators Under Sudden Excitation Change , 2020, IEEE Transactions on Industrial Electronics.

[108]  Chris Gerada,et al.  Simplified Damper Cage Circuital Model and Fast Analytical–Numerical Approach for the Analysis of Synchronous Generators , 2019, IEEE Transactions on Industrial Electronics.

[109]  R.C. Schaefer,et al.  Good as new , 2005, IEEE Industry Applications Magazine.

[110]  A. Godhwani,et al.  Commissioning experience with a modern digital excitation system , 1998 .

[111]  Bernt Lie,et al.  Online Model-Based Thermal Prediction for Flexible Control of an Air-Cooled Hydrogenerator , 2019, IEEE Transactions on Industrial Electronics.

[112]  O. Wasynczuk,et al.  Voltage and frequency regulation strategies in isolated AC micro-grids , 2012, 2012 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER).

[113]  Arijit Banerjee,et al.  Motors for Ship Propulsion , 2015, Proceedings of the IEEE.

[114]  Chung-Yuen Won,et al.  Output voltage control of synchronous generator for ships using a PMG type digital AVR , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[115]  U·伦丁,et al.  Arrangement and method for force compensation in electrical machines , 2015 .

[116]  Daniel C. Ludois,et al.  Single Active Switch Power Electronics for Kilowatt Scale Capacitive Power Transfer , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[117]  T. Kjellqvist,et al.  Estimation of field current in vector-controlled synchronous machine variable-speed drives employing brushless asynchronous exciters , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[118]  Yujing Liu,et al.  High frequency exciter of electrically excited synchronous motors for vehicle applications , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[119]  D S Mota,et al.  Comparison Between Voltage Control Structures of Synchronous Machines , 2010, IEEE Latin America Transactions.

[120]  Ravi Mutukutti,et al.  Field breaker tripping options for generator static excitation systems with AC field circuit breakers - A case study , 2010, IEEE PES General Meeting.

[121]  J. K. Reed,et al.  Capacitive Power Transfer for Rotor Field Current in Synchronous Machines , 2012, IEEE Transactions on Power Electronics.

[122]  Zan Zhang,et al.  Identification of TBAES rotating diode failure , 2017 .

[123]  Zebin Yang,et al.  MPTC for PMSMs of EVs With Multi-Motor Driven System Considering Optimal Energy Allocation , 2019, IEEE Transactions on Magnetics.

[124]  C. Schaefer.  Digital excitation systems—Growing obsolescence of aging systems , 2017, 2017 Annual Pulp, Paper And Forest Industries Technical Conference (PPFIC).

[125]  Jonas Kristiansen Noland,et al.  A New Paradigm for Large Brushless Hydrogenerators : Advantages Beyond the Static System , 2017 .

[126]  B. Ponick,et al.  Rotary transformer with ferrite core for brushless excitation of synchronous machines , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[127]  Jiadan Wei,et al.  An Integrated Method for Three-Phase AC Excitation and High-Frequency Voltage Signal Injection for Sensorless Starting of Aircraft Starter/Generator , 2019, IEEE Transactions on Industrial Electronics.

[128]  YuQi Zhang,et al.  Unified Model Formulations for Synchronous Machine Model with Saturation and Arbitrary Rotor Network Representation , 2018, 2018 IEEE Power & Energy Society General Meeting (PESGM).

[129]  Pablo Frías,et al.  High-speed de-excitation system for brushless synchronous machines , 2012 .

[130]  Byung-Il Kwon,et al.  Brushless Operation of a Wound-Field Synchronous Machine Using a Novel Winding Scheme , 2019, IEEE Transactions on Magnetics.

[131]  Yuan-Yih Hsu,et al.  Experience with the identification and tuning of excitation system parameters at the second nuclear power plant of Taiwan power company , 1996 .