Modeling the performance of a micromachined piezoelectric energy harvester

Piezoelectric energy microgenerators are devices that generate continuously electricity when they are subjected to varying mechanical strain due to e.g. ambient vibrations. This paper presents the mathematical analysis, modelling and validation of a miniaturized piezoelectric energy harvester based on ambient random vibrations. Aluminium nitride as piezoelectric material is arranged between two electrodes. The device design includes a silicon cantilever on which AlN film is deposited and which features a seismic mass at the end of the cantilever. Euler–Bernoulli energy approach and Hamilton’s principle are applied for device modeling and analysis of the operation of the device at various acceleration values. The model shows good agreement with the experimental findings, thus giving confidence into model. Both mechanical and electrical characteristics are considered and compared with the experimental data, and good agreement is obtained. The developed analytical model can be applied for the design of piezoelectric microgenerators with enhanced performance.

[1]  Hans Wagner,et al.  Natural frequencies of a uniform cantilever with a tip mass slender in the axial direction , 1976 .

[2]  Sang-Gook Kim,et al.  DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS , 2005 .

[3]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[4]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[5]  Daniel J. Inman,et al.  An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations , 2009 .

[6]  Daniel J. Inman,et al.  On the optimal energy harvesting from a vibration source using a PZT stack , 2009 .

[7]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[8]  Anantha Chandrakasan,et al.  Vibration-to-electric energy conversion , 2001, IEEE Trans. Very Large Scale Integr. Syst..

[9]  D.C.D. Oguamanam,et al.  Free vibration of beams with finite mass rigid tip load and flexural-torsional coupling , 2003 .

[10]  Yi-Chung Shu,et al.  Analysis of power output for piezoelectric energy harvesting systems , 2006 .

[11]  Daniel J. Inman,et al.  Model of Piezoelectric Power Harvesting Beam , 2003 .

[12]  George P. Simon,et al.  Characterization of mechanical vibration damping by piezoelectric materials , 1996 .

[13]  Robert Puers,et al.  Fabrication, modelling and characterization of MEMS piezoelectric vibration harvesters , 2008 .