Mass fabrication technique for polymeric replicas of arrays of insect corneas

Motivated to develop a technique for producing many high-fidelity replicas for the sacrifice of a single biotemplate, we combined a modified version of the conformal-evaporated-film-by-rotation technique and electroforming to produce a master negative made of nickel from a composite biotemplate comprising several corneas of common blowflies. This master negative can function as either a mold for casting multiple replicas or a die for stamping multiple replicas. An approximately 250 nm thick nickel film was thermally deposited on an array of blowfly corneas to capture the surface features with high fidelity and then a roughly 60 microm thick structural layer of nickel was electroformed onto the thin layer to give it the structural integrity needed for casting or stamping. The master negative concurrently captured the spatial features of the biotemplate at length scales ranging from 200 nm to a few millimeters. Polymer replicas produced thereafter by casting did faithfully reproduce features of a few micrometers and larger in dimension.

[1]  A. Lakhtakia,et al.  Replication of fly eyes by the conformal-evaporated-film-by-rotation technique , 2008, Nanotechnology.

[2]  Vijayakumar C. Venugopal,et al.  Origin and evolution of sculptured thin films , 2000 .

[3]  Donald L. Smith.  Thin-Film Deposition , 1994 .

[4]  Peng Jiang,et al.  Biomimetic subwavelength antireflective gratings on GaAs. , 2008, Optics letters.

[5]  J. Gardner,et al.  Study of natural photonic crystals in beetle scales and their conversion into inorganic structures via a sol–gel bio-templating route , 2010 .

[6]  R. Messier.  The nano-world of thin films , 2008 .

[7]  John A. Rogers,et al.  Low-cost, low-loss microlens arrays fabricated by soft-lithography replication process , 2003 .

[8]  Dilip K. Paul,et al.  Sculptured Thin Films: Nanoengineered Morphology and Optics , 2005 .

[9]  D. M. Mattox,et al.  The Foundations of Vacuum Coating Technology , 2003 .

[10]  Qixin Guo,et al.  Morphosynthesis of hierarchical ZnO replica using butterfly wing scales as templates , 2006 .

[11]  Di Zhang,et al.  Embedment of ZnO nanoparticles in the natural photonic crystals within peacock feathers , 2008, Nanotechnology.

[12]  W. Southwell.  Pyramid-array surface-relief structures producing antireflection index matching on optical surfaces , 1991 .

[13]  Akhlesh Lakhtakia,et al.  Biomimetization of butterfly wings by the conformal-evaporated-film-by-rotation technique for photonics , 2008 .

[14]  J. Bilello,et al.  Microstructure Development in Thin Films During Deposition from the Vapor Phase , 1987 .

[15]  Akhlesh Lakhtakia,et al.  Structural colors, cosmetics, and fabrics , 2009, NanoScience + Engineering.

[16]  A. Lakhtakia,et al.  Analysis of textured surfaces for photovoltaics , 1997 .

[17]  Gary Cook,et al.  Exact replication of biological structures by chemical vapor deposition of silica. , 2003, Angewandte Chemie.

[18]  Ming-Chuan Leu,et al.  Electroforming Process and Application to Micro/Macro Manufacturing , 2001 .

[19]  Stuart A. Boden,et al.  Nanostructured biomimetic moth-eye arrays in silicon by nanoimprint lithography , 2009, NanoScience + Engineering.

[20]  D. Yao,et al.  Rapid pattern transfer of biomimetic surface structures onto thermoplastic polymers , 2007 .

[21]  C. Pantano,et al.  Surface microstructure of GeSbSe chalcogenide thin films grown at oblique angle , 2007 .

[22]  A. Rohatgi,et al.  Ray tracing analysis of the inverted pyramid texturing geometry for high efficiency silicon solar cells , 1993 .

[23]  Akhlesh Lakhtakia,et al.  Fabrication of free-standing replicas of fragile, laminar, chitinous biotemplates , 2009, Bioinspiration & biomimetics.

[24]  Xi Zhang,et al.  Mimicking biological structured surfaces by phase-separation micromolding. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[25]  Wilhelm Barthlott,et al.  Biomimetic replicas: Transfer of complex architectures with different optical properties from plant surfaces onto technical materials. , 2009, Acta biomaterialia.

[26]  Zhong Lin Wang,et al.  Bio-inspired fabrication of antireflection nanostructures by replicating fly eyes , 2008, Nanotechnology.

[27]  A. Lakhtakia,et al.  Improved conformal coatings by oblique-angle deposition for bioreplication , 2009 .

[28]  F. Chiadini,et al.  Simulation and analysis of prismatic bioinspired compound lenses for solar cells , 2010, Bioinspiration & biomimetics.

[29]  Zhong Lin Wang,et al.  Controlled replication of butterfly wings for achieving tunable photonic properties. , 2006, Nano letters.

[30]  Y. Hirai,et al.  Nano-Imprint Lithography Using Replicated Mold by Ni Electroforming , 2001, Digest of Papers. Microprocesses and Nanotechnology 2001. 2001 International Microprocesses and Nanotechnology Conference (IEEE Cat. No.01EX468).

[31]  J. Baumberg,et al.  Mimicking the colourful wing scale structure of the Papilio blumei butterfly. , 2010, Nature nanotechnology.

[32]  Jong-Hwa Lee,et al.  Fabrication of 50nm patterned nickel stamp with hot embossing and electroforming process , 2007 .

[33]  Maria Aparecida Azevedo Pereira da Silva,et al.  Metallic submicrometer sieves fabricated by interferometric lithography and electroforming , 2005 .

[34]  Akhlesh Lakhtakia,et al.  Towards the use of the conformal-evaporated-film-by-rotation technique in fabricating microelectronic circuits and microsystems , 2009, Microelectron. Reliab..