D-Shaped POF Sensors for Refractive Index Sensing—The Importance of Surface Roughness

In this study the influence of the surface roughness on the transmission capacities of D-shaped plastic optical fibers (POFs) and sensors performance was investigated. Five D-shaped POF sensors were produced and characterized for refractive index sensing between 1.33 and 1.41. The sensors were characterized using a low-cost optical sensing system based on the variation of the transmitted light though the POF with refractive index changes (RI). Higher surface roughness increases the scattering losses through the POF and influences the sensors’ performance; therefore, a balance must be attained. Generally, the best performance was achieved when the sensing region was polished with P600 sandpaper as a final polishing step. Polishing with sandpapers of lower grit size resulted in lower scattering, higher linearity of the sensor response and generally lower performance for RI sensing. A sensor resolution of 10−3–10−4 RIU, dependent on the value of the external refractive index, was obtained through simple and low-cost manufacturing procedures. The obtained results show the importance of surface roughness in the development of POF sensors which can be used in several applications, such as for water quality assessment.

[1]  S. Richardson.  Water analysis: emerging contaminants and current issues. , 2009, Analytical chemistry.

[2]  Luigi Zeni,et al.  Refractive Index Sensing with D-Shaped Plastic Optical Fibers for Chemical and Biochemical Applications , 2016, Sensors.

[3]  Plastic optical fiber immunosensor for fast detection of sulfate-reducing bacteria , 2018, Measurement.

[4]  V. Sai,et al.  Development of LSPR based U-bent plastic optical fiber sensors , 2016 .

[5]  Yan Jin,et al.  Polymer Fiber Optic Sensors A Mini Review of their Synthesis and Applications , 2016 .

[6]  Romeo Bernini,et al.  Intensity-based plastic optical fiber sensor with molecularly imprinted polymer sensitive layer , 2017 .

[7]  G. Schüürmann,et al.  Contribution of waste water treatment plants to pesticide toxicity in agriculture catchments. , 2017, Ecotoxicology and environmental safety.

[8]  David Izquierdo,et al.  Simple dip-probe fluorescence setup sensor for in situ environmental determinations , 2009 .

[9]  Investigation of refractive index sensors based on side-polished plastic optical fibers , 2017 .

[10]  Guanxiu Liu,et al.  D-Shaped Plastic Optical Fiber Sensor for Testing Refractive Index , 2014, IEEE Sensors Journal.

[11]  Gotzon Aldabaldetreku,et al.  U-Shaped and Surface Functionalized Polymer Optical Fiber Probe for Glucose Detection , 2017, Sensors.

[12]  Jorge García-Ivars,et al.  Nanofiltration as tertiary treatment method for removing trace pharmaceutically active compounds in wastewater from wastewater treatment plants. , 2017, Water research.

[13]  Nerea De Acha,et al.  Micro and Nanostructured Materials for the Development of Optical Fibre Sensors , 2017, Sensors.

[14]  Nor Azah Yusof,et al.  Room temperature ammonia sensor using side-polished optical fiber coated with graphene/polyaniline nanocomposite , 2017 .

[15]  Hanqing Yu,et al.  Removal of antibiotic resistance genes from wastewater treatment plant effluent by coagulation. , 2017, Water research.

[16]  Nélia Alberto,et al.  Optical Sensors Based on Plastic Fibers , 2012, Sensors.

[17]  A. Leal-Junior,et al.  Sensitive zone parameters and curvature radius evaluation for polymer optical fiber curvature sensors , 2018 .

[18]  Subhashish Tiwari,et al.  Refractive Index Sensor Based on Spiral-Shaped Plastic Optical Fiber , 2017, IEEE Sensors Journal.

[19]  Assefa M. Melesse,et al.  A Comprehensive Review on Water Quality Parameters Estimation Using Remote Sensing Techniques , 2016, Sensors.

[20]  Feng Dejun,et al.  Refractive index sensor based on plastic optical fiber with tapered structure. , 2014, Applied optics.

[21]  Chuanxin Teng,et al.  Refractive index sensor based on a multi-notched plastic optical fiber. , 2017, Applied optics.

[22]  Francesco Mattiello,et al.  A Simple and Low-Cost Optical Fiber Intensity-Based Configuration for Perfluorinated Compounds in Water Solution , 2018, Sensors.

[23]  Gabriela Kuncová,et al.  Fiber-Optic Chemical Sensors and Fiber-Optic Bio-Sensors , 2015, Sensors.

[24]  Karsten Haupt,et al.  A disposable evanescent wave fiber optic sensor coated with a molecularly imprinted polymer as a selective fluorescence probe. , 2015, Biosensors & bioelectronics.

[25]  Karsten Haupt,et al.  A molecularly imprinted polymer-based evanescent wave fiber optic sensor for the detection of basic red 9 dye , 2015 .

[26]  Dejun Feng,et al.  Side-Hole Plastic Optical Fiber for Testing Liquid’s Refractive Index , 2015, IEEE Sensors Journal.

[27]  Luigi Zeni,et al.  Polishing Process Analysis for Surface Plasmon Resonance Sensors in D-Shaped Plastic Optical Fibers , 2018, Sensors.

[28]  O. Wolfbeis,et al.  Fiber-Optic Chemical Sensors and Biosensors (2013-2015). , 2016, Analytical chemistry.

[29]  Luigi Zeni,et al.  A Molecularly Imprinted Polymer on a Plasmonic Plastic Optical Fiber to Detect Perfluorinated Compounds in Water , 2018, Sensors.