Reduction of welding residual stress in the head-cylinder joint of a large rectifying tower by finite element method and experimental study

[1]  M. R. Hill,et al.  Fatigue crack growth rates in high pressure hydrogen gas for multiple X100 pipeline welds accounting for crack location and residual stress , 2020, Engineering Fracture Mechanics.

[2]  M. Pavier,et al.  Comparison of measured and modelled residual stresses in a welded P91 steel pipe undergoing post weld heat treatment , 2020, International Journal of Pressure Vessels and Piping.

[3]  A. Mehmanparast,et al.  Shot peening effects on residual stresses redistribution of offshore wind monopile multi-pass weldments , 2019, Marine Structures.

[4]  V. F. González-Albuixech,et al.  Effects of embedded cracks and residual stresses on the integrity of a reactor pressure vessel , 2018, Engineering Failure Analysis.

[5]  Shugen Xu,et al.  Optimization of girth welded joint in a high-pressure hydrogen storage tank based on residual stress considerations , 2018, International Journal of Hydrogen Energy.

[6]  Wang Tao,et al.  Study on welding sequence of butt-welded structures based on equivalent heat source parameter , 2018, International Journal of Pressure Vessels and Piping.

[7]  S. Tu,et al.  On Residual Stress and Relief for an Ultra-Thick Cylinder Weld Joint Based on Mixed Hardening Model: Numerical and Experimental Studies , 2018, Journal of Pressure Vessel Technology.

[8]  S. Tu,et al.  Evaluation of Through-Thickness Residual Stresses by Neutron Diffraction and Finite-Element Method in Thick Weld Plates , 2017 .

[9]  V. Robin,et al.  A Gaussian surrogate model for residual stresses induced by orbital multi-pass TIG welding , 2017 .

[10]  Menglan Duan,et al.  Influence of the welding sequence on residual stress and distortion of fillet welded structures , 2016 .

[11]  G. Ram,et al.  Estimation of residual stresses in an 800 mm thick steel submerged arc weldment , 2016 .

[12]  A. Kotousov,et al.  Quantification of residual stresses in multi-pass welds using neutron diffraction , 2015 .

[13]  Yanlin Zhao,et al.  Using autofrettage technology to decrease stresses in a girth welded joint of a high pressure hydrogen tank , 2015 .

[14]  Hidekazu Murakawa,et al.  Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start , 2015 .

[15]  Ninshu Ma,et al.  Residual stress measurement in an extra thick multi-pass weld using initial stress integrated inherent strain method , 2014 .

[16]  Christopher M. Gill,et al.  Measured and predicted residual stresses in thick section electron beam welded steels , 2014 .

[17]  Xuedong Chen,et al.  Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank , 2014 .

[18]  Jianxun Zhang,et al.  Influences of lumped passes on welding residual stress of a thick-walled nuclear rotor steel pipe by multipass narrow gap welding , 2014 .

[19]  Guan Wang,et al.  Effect of welding sequence on residual stress in thin-walled octagonal pipe−plate structure , 2014 .

[20]  Stéphane Bordas,et al.  The virtual node polygonal element method for nonlinear thermal analysis with application to hybrid laser welding , 2013 .

[21]  Wei Sun,et al.  Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal IN625 , 2013 .

[22]  Dean Deng,et al.  Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint , 2013 .

[23]  S. Tu,et al.  Influence of repair length on residual stress in the repair weld of a clad plate , 2012 .

[24]  Wanchuck Woo,et al.  Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: Finite element simulation , 2012 .

[25]  K. Jafarpur,et al.  Analysis of welding conditions based on induced thermal irreversibilities in welded structures: Cases of welding sequences and preheating treatment , 2011 .

[26]  Pingsha Dong,et al.  Multiaxial fatigue life assessment of welded structures , 2010 .

[27]  Bin Wang,et al.  The Mechanical Analysis of a New Multi-Channel High-Pressure Vessel , 2010, 2010 International Conference on Management and Service Science.

[28]  Shoichi Kiyoshima,et al.  Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment , 2009 .

[29]  R. H. Leggatt,et al.  Residual stresses in welded structures , 2008 .

[30]  Hidekazu Murakawa,et al.  Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements , 2006 .

[31]  Hisashi Serizawa,et al.  Numerical simulation of residual stress and deformation considering phase transformation effect , 2003 .

[32]  Xiaohua H. Cheng,et al.  Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures , 2003 .

[33]  Pingsha Dong,et al.  Residual stresses in strength-mismatched welds and implications on fracture behavior , 1998 .

[34]  A. Ince,et al.  Modeling and simulation of weld residual stresses and ultrasonic impact treatment of welded joints , 2018 .

[35]  S. Taheri,et al.  Impacts of weld residual stresses and fatigue crack growth threshold on crack arrest under high-cycle thermal fluctuations , 2017 .

[36]  Weiqiang Wang,et al.  Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger , 2013 .

[37]  Yusuf Ozcatalbas,et al.  Determination of optimum welding sequence and distortion forces in steel lattice beams , 2009 .