A Multi-Band Stacked RF Energy Harvester With RF-to-DC Efficiency Up to 84%

The aim of this paper is to show the possibility to harvest RF energy to supply wireless sensor networks in an outdoor environment. In those conditions, the number of existing RF bands is unpredictable. The RF circuit has to harvest all the potential RF energy present and cannot be designed for a single RF tone. In this paper, the designed RF harvester adds powers coming from an unlimited number of sub-frequency bands. The harvester's output voltage ratios increase with the number of RF bands. As an application example, a 4-RF band rectenna is designed. The system harvests energy from GSM900 (Global System for Mobile Communications), GSM1800, UMTS (Universal Mobile Telecommunications System) and WiFi bands simultaneously. RF-to-dc conversion efficiency is measured at 62% for a cumulative -10-dBm input power homogeneously widespread over the four RF bands and reaches 84% at 5.8 dBm. The relative error between the measured dc output power with all four RF bands on and the ideal sum of each of the four RF bands power contribution is less than 3%. It is shown that the RF-to-dc conversion efficiency is more than doubled compared to that measured with a single RF source, thanks to the proposed rectifier architecture.

[1]  Bo Li,et al.  An Antenna Co-Design Dual Band RF Energy Harvester , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[2]  Ian F. Akyildiz,et al.  Wireless sensor networks: a survey , 2002, Comput. Networks.

[3]  C. R. Crowell,et al.  Current transport in metal-semiconductor barriers , 1966 .

[4]  Biao Zhang,et al.  STUDY ON AN S-BAND RECTENNA ARRAY FOR WIRELESS MICROWAVE POWER TRANSMISSION , 2013 .

[5]  Paolo Fiorini,et al.  Energy autonomous systems : future trends in devices, technology, and systems , 2009 .

[6]  M. D'Urso,et al.  DESIGN CONSIDERATIONS FOR RADIO FREQUENCY ENERGY HARVESTING DEVICES , 2012 .

[7]  Changzhi Li,et al.  A 0.45-V MOSFETs-Based Temperature Sensor Front-End in 90 nm CMOS With a Noncalibrated $\pm \hbox{3.5} \ ^{\circ}\hbox{C} \ \hbox{3}\sigma$ Relative Inaccuracy From $-\hbox{55} \ ^{\circ}\hbox{C}$ to 105 $^{\circ}\hbox{C}$ , 2013, IEEE Transactions on Circuits and Systems II: Express Briefs.

[8]  P. D. Mitcheson,et al.  Ambient RF Energy Harvesting in Urban and Semi-Urban Environments , 2013, IEEE Transactions on Microwave Theory and Techniques.

[9]  Mark Thompson,et al.  Determination of the impedance matching domain of impedance matching networks , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[10]  Gu-Yeon Wei,et al.  Survey of Hardware Systems for Wireless Sensor Networks , 2008, J. Low Power Electron..

[11]  K. Yoshida,et al.  Energy Harvesting Circuit on a One-Sided Directional Flexible Antenna , 2013, IEEE Microwave and Wireless Components Letters.

[12]  Ching-Che Chung,et al.  An Autocalibrated All-Digital Temperature Sensor for On-Chip Thermal Monitoring , 2011, IEEE Transactions on Circuits and Systems II: Express Briefs.

[13]  Naoki Shinohara,et al.  Experimental study of rectenna connection for microwave power transmission , 2001 .

[14]  Antwi Nimo,et al.  Impedance optimization of wireless electromagnetic energy harvester for maximum output efficiency at μW input power , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  A. Collado,et al.  Optimal Waveforms for Efficient Wireless Power Transmission , 2014, IEEE Microwave and Wireless Components Letters.

[16]  A. G. Tijhuis,et al.  Multi-band simultaneous radio frequency energy harvesting , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).

[17]  J.A.C. Theeuwes,et al.  Ambient RF Energy Scavenging: GSM and WLAN Power Density Measurements , 2008, 2008 38th European Microwave Conference.

[18]  Naoki Shinohara,et al.  Experimental study of large rectenna array for microwave energy transmission , 1998 .

[19]  Joshua R. Smith,et al.  Sifting through the airwaves: Efficient and scalable multiband RF harvesting , 2014, 2014 IEEE International Conference on RFID (IEEE RFID).

[20]  Yong-xin Guo,et al.  A Dual-Band Rectenna Using Broadband Yagi Antenna Array for Ambient RF Power Harvesting , 2013, IEEE Antennas and Wireless Propagation Letters.

[21]  Kai Chang,et al.  A high-efficiency dual-frequency rectenna for 2.45- and 5.8-GHz wireless power transmission , 2002 .

[22]  Chi-Chih Chen,et al.  Design of an efficient ambient WiFi energy harvesting system , 2012 .

[23]  David D. Wentzloff,et al.  IEEE Transactions on Microwave Theory and Techniques and Antennas and Propagation Announce a Joint Special Issue on Ultra-Wideband (UWB) Technology , 2010 .

[24]  Changzhi Li,et al.  A 0.45-V MOSFETs-Based Temperature Sensor Front-End in 90 nm CMOS With a Noncalibrated ± 3.5°C 3σ Relative Inaccuracy From -55°C to 105°C. , 2013 .

[25]  M. Tentzeris,et al.  A Compact Dual-Band Rectenna Using Slot-Loaded Dual Band Folded Dipole Antenna , 2013, IEEE Antennas and Wireless Propagation Letters.

[26]  Wim Dehaene,et al.  A Low-Power and Low-Voltage BBPLL-based Sensor Interface in 130 nm CMOS for Wireless Sensor Networks , 2013 .

[27]  Veronique Kuhn,et al.  A multi-tone RF energy harvester in body sensor area network context , 2013, 2013 Loughborough Antennas & Propagation Conference (LAPC).

[28]  Wei Hwang,et al.  Fully on-chip temperature, process, and voltage sensors , 2010, Proceedings of 2010 IEEE International Symposium on Circuits and Systems.

[29]  Yoshihiro Kawahara,et al.  Novel Energy Harvesting Technologies for ICT Applications , 2008, 2008 International Symposium on Applications and the Internet.

[30]  Hiroyuki Arai,et al.  DTV band micropower RF energy-harvesting circuit architecture and performance analysis , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[31]  Apostolos Georgiadis,et al.  Conformal Hybrid Solar and Electromagnetic (EM) Energy Harvesting Rectenna , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[32]  Y. Kawahara,et al.  E-WEHP: A Batteryless Embedded Sensor-Platform Wirelessly Powered From Ambient Digital-TV Signals , 2013, IEEE Transactions on Microwave Theory and Techniques.