论文信息 - Characterization of solar panel using capacitive load

Characterization of solar panel using capacitive load

This work aims to design and assembly a characterization of solar panel using capacitive load. This device provides information that allows the user to increase the efficiency of power generation in photovoltaic systems. Detection of operation issues or abnormal conditions such as partial shading caused by dirt or objects can affect adversely the maximum power point. Simulation results were used to validate the model and allowed the development of the device. Tests were realized with the prototype in a panel of 48 W. Measured results present accuracy when compared with the simulated results validating the prototype.

[1] Shuhui Li,et al. PV energy extraction characteristic study under shading conditions for different converter configurations , 2012, 2012 IEEE Power and Energy Society General Meeting.

[2] Fabiano Perin Gasparin. Análise de efeitos transientes na caracterização elétrica de módulos fotovoltaicos , 2012 .

[3] Eduardo Lorenzo Pigueiras,et al. Capacitive load based on IGBTs for on-site characterization of PV arrays , 2006 .

[4] Roger A. Dougal,et al. Parallel-Connected Solar PV System to Address Partial and Rapidly Fluctuating Shadow Conditions , 2009, IEEE Transactions on Industrial Electronics.

[5] Qi Zhang,et al. A novel topology for solving the partial shading problem in photovoltaic power generation system , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[6] Marwan M. Mahmoud,et al. Transient analysis of a PV power generator charging a capacitor for measurement of the I–V characteristics , 2006 .

[7] M. Piliougine,et al. Different methods to obtain the I–V curve of PV modules: A review , 2008, 2008 33rd IEEE Photovoltaic Specialists Conference.