Improved J and CTOD Estimation Formulas for C(T) Fracture Specimens Including Overmatched Weldments

This work focuses on the evaluation procedure to determine the elastic-plastic J-integral and CTOD fracture toughness based upon the η-method for C(T) fracture specimens made of homogeneous and welded steels. The primary objective of this investigation is to enlarge on previous developments of J and CTOD estimation procedures for this crack configuration while, at the same time, addressing effects of strength mismatch on the plastic η-factors. The present analyses enable the introduction of a larger set of factor η for a wide range of crack sizes (as measured by the a/W-ratio) and material properties, including different levels of weld strength mismatch, applicable to structural, pipeline and pressure vessel steels. Very detailed non-linear finite element analyses for plane-strain models of square groove, center cracked C(T) fracture specimens provide the evolution of load with increased crack mouth opening displacement required for the estimation procedure. Overall, the present study, when taken together with previous investigations, provides a fairly extensive body of results to determine parameters J and CTOD for different materials using C(T) specimens with varying overmatch conditions.Copyright © 2011 by ASME