Case Histories in large motors: Diagnosis of electromechanical faults through extraction of characteristic components during the startup

The aim of the paper is to show several case histories regarding the diagnosis of rotor asymmetries and other faults in large induction motors. These are motors under real operation in power generating installations. Two different approaches are used for the diagnosis of the machine condition. Both of them are based on the study of the startup transient of the machine and the extraction of characteristic patterns caused by the evolution during the transient of certain components dependant on the slip. The results show the validity of both diagnosis methods. Special interest has the use of the discrete wavelet transform for the detection and discrimination of different faults. Its validity was already proved by the authors in previous works but in small motors. The results show the potentiality of the approaches for the diagnosis of the condition of a wide range of motors.

[1]  Antero Arkkio,et al.  DWT analysis of numerical and experimental data for the diagnosis of dynamic eccentricities in induction motors , 2007 .

[2]  J. Antonino-Daviu,et al.  Application and Optimization of the Discrete Wavelet Transform for the Detection of Broken Rotor Bars in Induction Machines , 2006 .

[3]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[4]  S.S. Udpa,et al.  Frequency invariant classification of ultrasonic weld inspection signals , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[6]  W. Rams,et al.  Practical diagnosis of induction machines operated in power plant auxiliaries , 2005, 2005 IEEE Russia Power Tech.

[7]  Wenying Huang,et al.  A novel detection method of motor broken rotor bars based on wavelet ridge , 2003 .

[8]  M. Riera-Guasp,et al.  Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines , 2006, IEEE Transactions on Industry Applications.

[9]  M. Riera,et al.  Validation of a new method for the diagnosis of rotor bar failures via wavelet transformation in industrial induction machines , 2005, 2005 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[10]  H. Douglas,et al.  Broken rotor bar detection in induction machines with transient operating speeds , 2005, IEEE Transactions on Energy Conversion.