An update on computer-engineered complete dentures: A systematic review on clinical outcomes.

STATEMENT OF PROBLEM Reports on computer-engineered complete dentures (CECDs) continue to increase. Systematic reviews on clinical outcomes and applications associated with CECDs are lacking in the literature. PURPOSE The purpose of this systematic review was to determine the clinical outcomes and applications of CECDs. MATERIAL AND METHODS Electronic searches of the English literature from January 1984 to May 2016 were performed in MEDLINE and Cochrane databases, with the results enriched by hand searches and citation mining to address 2 relevant population intervention comparison outcome (PICO) questions: What are the clinical outcomes associated with CECDs? Are there specific applications and significant advantages for CECDs? RESULTS A review of the selected articles on CECDs revealed significantly better retention and reduced clinical time for the milled CECDs compared with conventional complete dentures. An advantage associated with CECDs is the possibility of electronically archiving data using digital technology for rapid fabrication. Applications reported in the literature with CECDs were also identified. CONCLUSIONS A positive trend was seen in the outcomes with CECDs, although patient selection might have also contributed to favorable outcomes. Significantly reduced clinical time, improved retention, and digital archiving were the main advantages associated with CECDs.

[1]  Manabu Kanazawa,et al.  Trial of a CAD/CAM system for fabricating complete dentures. , 2011, Dental materials journal.

[2]  Yong Wang,et al.  Study on CAD&RP for removable complete denture , 2009, Comput. Methods Programs Biomed..

[3]  Van Ramos,et al.  Complete denture fabrication with CAD/CAM record bases. , 2015, The Journal of prosthetic dentistry.

[4]  B Kordass,et al.  Concept and development of a computerized positioning of prosthetic teeth for complete dentures. , 2006, International journal of computerized dentistry.

[5]  Daniel R Llop,et al.  Cone beam computed tomography imaging as a primary diagnostic tool for computer-guided surgery and CAD-CAM interim removable and fixed dental prostheses. , 2016, The Journal of prosthetic dentistry.

[6]  Ajay Dhingra,et al.  Prospective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes. , 2016, The Journal of prosthetic dentistry.

[7]  Yong-de Zhang,et al.  Kinematics Modeling and Experimentation of the Multi-manipulator Tooth-Arrangement Robot for Full Denture Manufacturing , 2009, Journal of Medical Systems.

[8]  A Nimmo,et al.  Classification system for complete edentulism. , 1999, Dentistry today.

[9]  Mathew T Kattadiyil,et al.  Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques. , 2016, The Journal of prosthetic dentistry.

[10]  Harold Neumeier,et al.  Digital immediate dentures treatment: A clinical report of two patients. , 2016, The Journal of prosthetic dentistry.

[11]  Manabu Kanazawa,et al.  Evaluation of a complete denture trial method applying rapid prototyping. , 2012, Dental materials journal.

[12]  Han Wang,et al.  Quantitative Evaluation of Tissue Surface Adaption of CAD-Designed and 3D Printed Wax Pattern of Maxillary Complete Denture , 2015, BioMed research international.

[13]  Ehsan Farjood,et al.  Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature , 2015, Journal of dentistry.

[14]  Avinash S. Bidra,et al.  Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. , 2013, The Journal of prosthetic dentistry.

[15]  C. Goodacre,et al.  CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. , 2012, The Journal of prosthetic dentistry.

[16]  Mathew T Kattadiyil,et al.  Use of a digitally planned and fabricated mandibular complete denture for easy conversion to an immediately loaded provisional fixed complete denture. Part 1. Planning and surgical phase. , 2014, The International journal of prosthodontics.

[17]  B. Yılmaz,et al.  Clinical performance of CAD-CAM-fabricated complete dentures: A cross-sectional study. , 2016, The Journal of prosthetic dentistry.

[18]  Marlis Eichberger,et al.  Complete denture fabrication supported by CAD/CAM. , 2016, The Journal of prosthetic dentistry.

[19]  C. Ohkubo,et al.  Digital Relief of the Mental Foramen for a CAD/CAM‐Fabricated Mandibular Denture , 2018, Journal of Prosthodontics.

[20]  Mathew T Kattadiyil,et al.  Digitally planned and fabricated mandibular fixed complete dentures. Part 2. Prosthodontic phase. , 2015, The International journal of prosthodontics.

[21]  Thomas J Balshi,et al.  Positioning handle and occlusal locks for the Teeth-in-a-Day protocol. , 2016, The Journal of prosthetic dentistry.

[22]  Erhan Dilber,et al.  Fabricating Complete Dentures with CAD/CAM and RP Technologies. , 2015, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[23]  Burak Yilmaz,et al.  Fabricating complete dentures with CAD/CAM technology. , 2014, The Journal of prosthetic dentistry.

[24]  M Okada,et al.  A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. , 1994, The International journal of prosthodontics.

[25]  Ana Jokanovic,et al.  Effects of offset values for artificial teeth positions in CAD/CAM complete denture , 2014, Comput. Biol. Medicine.

[26]  Mathew T. Kattadiyil,et al.  Application of digital technology in the prosthodontic management of a patient with myasthenia gravis: A clinical report. , 2016, The Journal of prosthetic dentistry.

[27]  L. T. García,et al.  M. M. House mental classification revisited: Intersection of particular patient types and particular dentist's needs. , 2003, The Journal of prosthetic dentistry.

[28]  G. Subramanian,et al.  Comparison of Patient Satisfaction in the Fabrication of Conventional Dentures vs. DENTCA (CAD/CAM) Dentures: A Case Report. , 2015, Journal of the New Jersey Dental Association.

[29]  Tariq F Alghazzawi Advancements in CAD/CAM technology: Options for practical implementation. , 2016, Journal of prosthodontic research.

[30]  Kazutomo Yagi,et al.  Part-Digitizing System of Impression and Interocclusal Record for Complete Denture Fabrication. , 2016, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[31]  N Kawahata,et al.  Trial of duplication procedure for complete dentures by CAD/CAM. , 1997, Journal of oral rehabilitation.

[32]  J. Bader Systematic reviews and their implications for dental practice. , 2004, Texas dental journal.

[33]  片瀬 洋 Face simulation system for complete dentures by applying rapid prototyping , 2012 .

[34]  Linda S Behar-Horenstein,et al.  Digital Denture Fabrication in Pre- and Postdoctoral Education: A Survey of U.S. Dental Schools. , 2016, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[35]  Toshinari Nakamura,et al.  In vitro evaluation of basal shapes and offset values of artificial teeth for CAD/CAM complete dentures , 2016, Comput. Biol. Medicine.

[36]  T. McGarry,et al.  Classification system for complete edentulism. The American College of Prosthodontics. , 1999, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[37]  Avinash S. Bidra,et al.  The 2-visit CAD-CAM implant-retained overdenture: a clinical report. , 2014, The Journal of oral implantology.

[38]  Mathew T Kattadiyil,et al.  Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. , 2015, The Journal of prosthetic dentistry.

[39]  Mathew T Kattadiyil,et al.  CAD/CAM complete dentures: a review of two commercial fabrication systems. , 2013, Journal of the California Dental Association.

[40]  Ebru Nur Baytaroğlu,et al.  A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication , 2016, European journal of dentistry.

[41]  Franz Sebastian Schwindling,et al.  A comparison of two digital techniques for the fabrication of complete removable dental prostheses: A pilot clinical study. , 2016, The Journal of prosthetic dentistry.