Complex-shaped, finely-featured ZrC/W composites via shape-preserving reactive melt infiltration of porous WC structures fabricated by 3-D ink extrusion

[1]  C. Kenel,et al.  Microstructure and Properties of Additively-Manufactured WC-Co Microlattices and WC-Cu Composites , 2021, Acta Materialia.

[2]  Xiaohong Sun,et al.  Dense ceramics with complex shape fabricated by 3D printing: A review , 2021, Journal of Advanced Ceramics.

[3]  D. Galusek,et al.  Effect of ZrC nanopowder addition in WC preforms on microstructure and properties of W–ZrC composites prepared by the displacive compensation of porosity (DCP) method , 2021, Journal of the Australian Ceramic Society.

[4]  A. Spierings,et al.  Influence of particle size distribution and morphology on the properties of the powder feedstock as well as of AlSi10Mg parts produced by laser powder bed fusion (LPBF) , 2020 .

[5]  J. Barnes,et al.  Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges , 2020 .

[6]  Julie M. Schoenung,et al.  A Statistical Analysis of Powder Flowability in Metal Additive Manufacturing , 2020, Advanced Engineering Materials.

[7]  R. Shah,et al.  Effect of Polymer Binder on the Synthesis and Properties of 3D-Printable Particle-Based Liquid Materials and Resulting Structures , 2019, ACS omega.

[8]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[9]  Erwin Peng,et al.  Ceramic Robocasting: Recent Achievements, Potential, and Future Developments , 2018, Advanced materials.

[10]  A. Henry,et al.  Ceramic–metal composites for heat exchangers in concentrated solar power plants , 2018, Nature.

[11]  Wolfgang A. Wall,et al.  Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing , 2018, Journal of Materials Processing Technology.

[12]  Richu Wang,et al.  Transitional Suspensions Containing Thermosensitive Dispersant for Three-Dimensional Printing. , 2015, ACS applied materials & interfaces.

[13]  Yu Zhou,et al.  Microstructure and properties of ZrC–W composite fabricated by reactive infiltration of Zr2Cu into WC/W preform , 2015 .

[14]  M. Belmonte,et al.  Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting , 2012 .

[15]  Kenneth H. Sandhage,et al.  Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity , 2010 .

[16]  Yu Zhou,et al.  Elevated temperature compressive failure behavior of a 30 vol.%ZrCp/W composite , 2007 .

[17]  J. Cesarano,et al.  Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .

[18]  K. Sandhage,et al.  Dense, Near Net-Shaped, Carbide/Refractory Metal Composites at Modest Temperatures by the Displacive Compensation of Porosity (DCP) Method , 2004 .

[19]  K. Sandhage,et al.  Near net-shape, ultra-high melting, recession-resistant ZrC/W-based rocket nozzle liners via the displacive compensation of porosity (DCP) method , 2004 .

[20]  K. Sandhage,et al.  Incongruent reduction of tungsten carbide by a zirconium-copper melt , 2003 .

[21]  Yu Zhou,et al.  The mechanical and thermophysical properties of ZrC/W composites at elevated temperature , 2002 .

[22]  Yue Wang,et al.  Elevated temperature ablation resistance and thermophysical properties of tungsten matrix composites reinforced with ZrC particles , 2001 .

[23]  H. Okamoto.  C-Zr (Carbon-Zirconium) , 1996 .

[24]  Y. S. Touloukian.  Thermal conductivity: metallic elements and alloys , 1971 .

[25]  K. Unocic,et al.  W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms , 2021 .

[26]  Yaxiong Liu,et al.  Effect of particle size gradation on the performance of glass-ceramic 3D printing process , 2017 .

[27]  Yu Zhou,et al.  Dense sub-micron-sized ZrC-W composite produced by reactive melt infiltration at 1200 °C , 2012 .

[28]  H. Pierson.  Carbides of Group IV: Titanium, Zirconium, and Hafnium Carbides , 1996 .

[29]  Y. S. Touloukian.  Thermal Expansion: Nonmetallic Solids , 1977 .

[30]  Y. S. Touloukian.  Thermal Expansion: Metallic Elements and Alloys , 1975 .