Stability of MgO(1 1 1) films grown on 6H-SiC(0 0 0 1) by molecular beam epitaxy for two-step integration of functional oxides

Abstract Crystalline magnesium oxide (MgO) (1 1 1), 20 A thick, was grown by molecular beam epitaxy (MBE) on hydrogen cleaned hexagonal silicon carbide (6H-SiC). The films were further heated to 740 °C and 650 °C under different oxygen environments in order to simulate processing conditions for subsequent functional oxide growth. The purpose of this study was to determine the effectiveness and stability of crystalline MgO films and the MgO/6H-SiC interface for subsequent heteroepitaxial deposition of multi-component, functional oxides by MBE or pulsed laser deposition processes. The stability of the MgO films and the MgO/6H-SiC interface was found to be dependent on substrate temperature and the presence of atomic oxygen. The MgO films and the MgO/6H-SiC interface are stable at temperatures up to 740 °C at 1.0 × 10 −9  Torr for extended periods of time. While at temperatures below 400 °C exposure to the presence of active oxygen for extended periods of time has negligible impact, exposure to the presence of active oxygen for more than 5 min at 650 °C will degrade the MgO/6H-SiC interface. Concurrent etching and interface breakdown mechanisms are hypothesized to explain the observed effects. Further, barium titanate was deposited by MBE on bare 6H-SiC(0 0 0 1) and MgO(1 1 1)/6H-SiC(0 0 0 1) in order to evaluate the effectiveness of the MgO as a heteroepitaxial template layer for perovskite ferroelectrics.

[1]  U. Starke,et al.  Epitaxially ideal oxide–semiconductor interfaces: Silicate adlayers on hexagonal (0001) and (0001̄) SiC surfaces , 1999 .

[2]  Jacques Jupille,et al.  Stability of rocksalt (111) polar surfaces: beyond the octopole. , 2004, Physical review letters.

[3]  L. Marks,et al.  CYCLIC OZONE IDENTIFIED IN MAGNESIUM OXIDE (111) SURFACE RECONSTRUCTIONS , 1998 .

[4]  B. Wessels,et al.  Epitaxial thin films of MgO on Si using metalorganic molecular beam epitaxy , 2000 .

[5]  F. Ren,et al.  Determination of MgO/GaN heterojunction band offsets by x-ray photoelectron spectroscopy , 2006 .

[6]  Wolf,et al.  Reconstruction of NaCl surfaces from a dipolar solution to the Madelung problem. , 1992, Physical review letters.

[7]  Vlado K. Lazarov,et al.  Structure of the hydrogen-stabilized MgO (111) - (1×1) polar surface: Integrated experimental and theoretical studies , 2005 .

[8]  K. A. Shaw,et al.  Interdiffusion study of magnesium in magnetite thin films grown on magnesium oxide (001) substrates , 2000 .

[9]  N. Harrison,et al.  Stability of rocksalt polar surfaces: An ab initio study of MgO(111) and NiO(111) , 2003 .

[10]  V. Henrich.  Thermal faceting of (110) and (111) surfaces of MgO , 1976 .

[11]  N. Saks,et al.  Effect of oxidation and reoxidation on the oxide-substrate interface of 4H- and 6H-SiC , 2000 .

[12]  Xueyan Zhao,et al.  AIChE Annual Meeting Conference Proceedings , 2008 .

[13]  A. Tagantsev,et al.  Room-temperature ferroelectricity in strained SrTiO3 , 2004, Nature.

[14]  X. Chen,et al.  Orientation selective growth of MgO films on Si (100) by pulsed laser deposition , 2002 .

[15]  Xianhua Wei,et al.  Study on interfacial strain behavior of functional oxide heterostructures , 2006 .

[16]  D. Schmeißer,et al.  Oxide growth on SiC(0 0 0 1) surfaces , 2001 .

[17]  Alexander G. Carver,et al.  Molecular beam epitaxy of complex metal-oxides: Where have we come, where are we going, and how are we going to get there? , 2005 .

[18]  Z. Cai,et al.  Low temperature growth of crystalline magnesium oxide on hexagonal silicon carbide (0001) by molecular beam epitaxy , 2007 .

[19]  Mark D. Losego,et al.  MgO epitaxy on GaN (0002) surfaces by molecular beam epitaxy , 2006 .

[20]  Water chemisorption and reconstruction of the MgO surface. , 1995, Physical review. B, Condensed matter.

[21]  L. Marks,et al.  Direct observation of charge transfer at a MgO(111) surface. , 2004, Physical review letters.

[22]  Wei Chen,et al.  Atomic scale oxidation of silicon nanoclusters on silicon carbide surfaces , 2003 .

[23]  D. Schlom,et al.  Cheap and stable titanium source for use in oxide molecular beam epitaxy systems , 1996 .

[24]  C. Vittoria,et al.  Growth of Ba-hexaferrite films on single crystal 6-H SiC , 2006 .

[25]  J. Maria,et al.  Thin, crystalline MgO on hexagonal 6H-SiC(0001) by molecular beam epitaxy for functional oxide integration , 2007 .

[26]  Shuwen Jiang,et al.  Growth modes transition induced by strain relaxation in epitaxial MgO thin films on SrTiO3 (001) substrates , 2005 .

[27]  D. R. Stull.  JANAF thermochemical tables , 1966 .

[28]  Hiroshi Onishi,et al.  Adsorption of Na atoms and oxygen-containing molecules on MgO(100) and (111) surfaces , 1987 .

[29]  B. Wessels,et al.  Integration of BaTiO3 on Si (0 0 1) using MgO/STO buffer layers by molecular beam epitaxy , 2006 .