Real-time simultaneous temperature and strain measurements at cryogenic temperatures in an optical fiber

A novel fiber optic sensor has been developed to be used in superconducting magnets for fusion reactors and other large cable-in-conduit superconductor (CICC) magnet applications. These large superconducting magnets need a diagnostic that can measure the temperature and strain throughout the magnet in real-time, which was not possible until now. Simultaneous temperature and strain measurements at cryogenic temperatures have been demonstrated, using spontaneous Brillouin scattering in an optical fiber. Using an extremely narrow (100 Hz) linewidth Brillouin laser with very low noise as a frequency shifted local oscillator, the frequency shift of spontaneous Brillouin scattered light was measured using heterodyne detection. A pulsed laser was used to probe the fiber using Optical Time Domain Reflectometry (OTDR) to determine spatial resolution. The spontaneous Brillouin frequency shift and linewidth as a function of temperature agree with previous literature on stimulated Brillouin scattering data from room temperature down to 4 K. For the first time, the spontaneous Brillouin frequency shift, linewidth, and intensity as a function of strain have been measured down to 4 K. Analyzing the frequency spectrum of the scattered light after an FFT gives the Brillouin frequency shift, linewidth, and intensity of the scattered light. 65,000 pulses, with 53 ns pulse widths, were averaged in under one second, providing a 5 meter spatial resolution along a fiber that was about 100 m long. Measuring these three parameters allow the simultaneous determination of temperature and strain in real-time throughout a fiber with a spatial resolution on the order of several meters.

[1]  S. Mahar,et al.  Spontaneous Brillouin Scattering Quench Diagnostics for Large Superconducting Magnets , 2008 .

[2]  J. K. Thompson,et al.  Handbook on Materials for Superconducting Machinery , 1974 .

[3]  J. H. Schultz.  Superconducting Magnets, Quench Protection , 1999 .

[4]  X. Bao,et al.  Combined distributed temperature and strain sensor based on Brillouin loss in an optical fiber. , 1994, Optics letters.

[5]  T. Newson,et al.  100 km distributed temperature sensor based on coherent detection of spontaneous Brillouin backscatter , 2004 .

[6]  R. Aymar,et al.  The ITER design , 2002 .

[7]  X. Bao,et al.  Simultaneous distributed strain and temperature measurement. , 1999, Applied optics.

[8]  Shibin Jiang,et al.  Novel distributed fiber temperature and strain sensor using coherent radio-frequency detection of spontaneous Brillouin scattering , 2007 .

[9]  Luca Bottura,et al.  A Numerical Model for the Simulation of Quench in the ITER Magnets , 1996 .

[10]  Xiaoyi Bao,et al.  Simultaneous strain and temperature measurements with polarization-maintaining fibers and their error analysis by use of a distributed Brillouin loss system. , 2004, Optics letters.

[11]  Luc Thevenaz,et al.  Brillouin optical fiber sensor for cryogenic thermometry , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  X. Bao,et al.  22-km distributed temperature sensor using Brillouin gain in an optical fiber. , 1993, Optics letters.

[13]  Shibin Jiang,et al.  Highly stable low-noise Brillouin fiber laser with ultranarrow spectral linewidth , 2006, IEEE Photonics Technology Letters.

[14]  Ali Shajii.  Theory and modelling of quench in cable-in-conduit superconducting magnets , 1994 .

[15]  Toshihiko Yoshino,et al.  Wide-range temperature dependence of Brillouin shift in a dispersion-shifted fiber and its annealing effect , 2003 .