Collagen and chitosan blends for 3D bioprinting: A rheological and printability approach

Abstract Collagen and chitosan are widely employed as biomaterials, including for 3D-bioprinting. However, the use of collagen and chitosan (col:chi) blends as bioinks is still scarce. In this work, the rheology of different hydrogel precursors (0.5–1.50% w/v chi: 0.18–0.54% w/v col) was analyzed through frequency and strain sweeps, as well as at different shear rates. Col:chi blends showed a shear-thinning behavior, with viscosity values at low shear rates between 0.35 and 2.80 Pa s. Considering the strain rate determined by the applied flow in a 3D-bioprinter, precursor viscosities during the extrusion were in the interval 0.5–0.8 Pa s. Printability (Pr) was measured comparing images of the printed meshes and the corresponding CAD grid design, using photograph analysis. Col:chi 0.36:1.00 was chosen to print mono-layered scaffolds for tissue engineering (TE) because of its suitable viscosity, printability and polymer ratio content. Hydrogels were obtained through NaHCO3 nebulization and 37° incubation, and NHS/EDC were added to obtain scaffolds with improved mechanical behavior. They were stable after 44 h in PBS with collagenase at physiological level and showed no cytotoxic effect in NIH-3T3 fibroblasts.

[1]  R. Cameron,et al.  Tailoring chitosan/collagen scaffolds for tissue engineering: Effect of composition and different crosslinking agents on scaffold properties. , 2015, Carbohydrate polymers.

[2]  Akhilesh K. Gaharwar,et al.  Polymers for Bioprinting , 2015 .

[3]  Michael S. Detamore,et al.  Flow Behavior Prior to Crosslinking: The Need for Precursor Rheology for Placement of Hydrogels in Medical Applications and for 3D Bioprinting. , 2019, Progress in polymer science.

[4]  Pei-yan Shan,et al.  Controlled degradable chitosan/collagen composite scaffolds for application in nerve tissue regeneration , 2019, Polymer Degradation and Stability.

[5]  Anthony Atala,et al.  Evaluation of hydrogels for bio-printing applications. , 2013, Journal of biomedical materials research. Part A.

[6]  C. Doillon,et al.  Preparation of ready-to-use, storable and reconstituted type I collagen from rat tail tendon for tissue engineering applications , 2006, Nature Protocols.

[7]  F. Melchels,et al.  Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability , 2017, Biofabrication.

[8]  Wei Long Ng,et al.  Print Me An Organ! Why We Are Not There Yet , 2019, Progress in Polymer Science.

[9]  W. Horak,et al.  Collagen/chitosan/hyaluronic acid - based injectable hydrogels for tissue engineering applications - design, physicochemical and biological characterization. , 2018, Colloids and surfaces. B, Biointerfaces.

[10]  Fengfu Li,et al.  A collagen–chitosan hydrogel for endothelial differentiation and angiogenesis. , 2010, Tissue engineering. Part A.

[11]  D. Mantovani,et al.  Preparation of ready-to-use, stockable and reconstituted collagen. , 2005, Macromolecular bioscience.

[12]  K. Shakesheff,et al.  Translational considerations in injectable cell-based therapeutics for neurological applications: concepts, progress and challenges , 2017, npj Regenerative Medicine.

[13]  Yun-yu Hu,et al.  Effects of different cross-linking conditions on the properties of genipin-cross-linked chitosan/collagen scaffolds for cartilage tissue engineering , 2011, Journal of materials science. Materials in medicine.

[14]  May Win Naing,et al.  Skin Bioprinting: Impending Reality or Fantasy? , 2016, Trends in biotechnology.

[15]  Alessandro Giacomello,et al.  Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.

[16]  J. Cauich‐Rodríguez,et al.  Effect of two crosslinking methods on the physicochemical and biological properties of the collagen-chitosan scaffolds , 2019, European Polymer Journal.

[17]  B. Duan,et al.  3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.

[18]  S. Bai,et al.  Preparation of collagen/chitosan microspheres for 3D macrophage proliferation in vitro , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[19]  Wei Sun,et al.  Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells , 2016, Biofabrication.

[20]  Ashish B. Deoghare,et al.  Scaffold Development Using Biomaterials: A Review , 2018 .

[21]  V. Martins,et al.  Thermal and Rheological Behavior of Collagen. Chitosan blends , 2002 .

[22]  H. Mansur,et al.  Thermogelling chitosan-collagen-bioactive glass nanoparticle hybrids as potential injectable systems for tissue engineering. , 2016, Materials science & engineering. C, Materials for biological applications.

[23]  Dong-Woo Cho,et al.  Chapter 7 – Extrusion Bioprinting , 2015 .

[24]  O. Hermanson,et al.  Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation. , 2007, Biomaterials.

[25]  Milica Radisic,et al.  A peptide-modified chitosan-collagen hydrogel for cardiac cell culture and delivery. , 2012, Acta biomaterialia.

[26]  Li Ren,et al.  Genipin-cross-linked collagen/chitosan biomimetic scaffolds for articular cartilage tissue engineering applications. , 2010, Journal of biomedical materials research. Part A.

[27]  F. Lin,et al.  Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. , 2005, Biomaterials.

[28]  K. Lewandowska,et al.  The miscibility of collagen/hyaluronic acid/chitosan blends investigated in dilute solutions and solids , 2016 .

[29]  Alexandra L Rutz,et al.  A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice , 2017, Nature Communications.

[30]  Qing Gao,et al.  Research on the printability of hydrogels in 3D bioprinting , 2016, Scientific Reports.

[31]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[32]  Lie Ma,et al.  Collagen/chitosan porous scaffolds with improved biostability for skin tissue engineering. , 2003, Biomaterials.