Operation Efficiency Optimization for Permanent Magnet Synchronous Motor Based on Improved Particle Swarm Optimization

In this paper, an improved online particle swarm optimization (PSO) is proposed to optimize the traditional search controller for improving the operating efficiency of the permanent magnet synchronous motor (PMSM). This algorithm combines the advantages of the attraction and repulsion PSO and the distributed PSO that can help the search controller to find the optimal d - axis air gap current quickly and accurately under non-stationary operating conditions, thereby minimizing the air gap flux and then improving the motor efficiency. To verify the effectiveness and stability of this proposed algorithm, the operating efficiency of PMSM as using this proposed algorithm is compared with that of traditional search controller under non-stationary operating conditions. The results show that the proposed algorithm can improve the operating efficiency of PMSM by 6.03% on average under non-stationary operation conditions. This indicates that the search controller based on the improved PSO has a better adaptation to the variation of external operating conditions, and can improve the operation efficiency of PMSM under non-stationary condition.

[1]  Zhuoran Zhang,et al.  Study of Efficiency Characteristics of Interior Permanent Magnet Synchronous Motors , 2018, IEEE Transactions on Magnetics.

[2]  Datong Qin,et al.  Research on a multi-objective hierarchical prediction energy management strategy for range extended fuel cell vehicles , 2019, Journal of Power Sources.

[3]  Il-Yop Chung,et al.  Real-time particle swarm optimization based current harmonic cancellation , 2009, 2009 IEEE Power & Energy Society General Meeting.

[4]  Improved efficiency of direct torque controlled induction motor drive by golden section method , 2019 .

[5]  Dianguo Xu,et al.  Maximum Efficiency Per Ampere Control of Permanent-Magnet Synchronous Machines , 2015, IEEE Transactions on Industrial Electronics.

[6]  Thomas X. Wu,et al.  An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics , 2019, IEEE Transactions on Industrial Electronics.

[7]  Riadh Abdelati,et al.  Optimal control strategy of an induction motor for loss minimization using Pontryaguin principle , 2019, Eur. J. Control.

[8]  Hsiu-Ying Hwang,et al.  Optimized Fuel Economy Control of Power-Split Hybrid Electric Vehicle with Particle Swarm Optimization , 2020, Energies.

[9]  Dong Hwa Kim,et al.  Vector control for loss minimization of induction motor using GA-PSO , 2008, Appl. Soft Comput..

[10]  Guang Li,et al.  An adaptive fusion estimation algorithm for state of charge of lithium-ion batteries considering wide operating temperature and degradation , 2020 .

[11]  Lech M. Grzesiak,et al.  Adaptive state feedback speed controller for PMSM based on Artificial Bee Colony algorithm , 2019, Appl. Soft Comput..

[12]  Zheng Chen,et al.  Energy Management for a Power-Split Plug-In Hybrid Electric Vehicle Based on Reinforcement Learning , 2018, Applied Sciences.

[13]  Jianzhong Wu,et al.  Challenges on primary frequency control and potential solution from EVs in the future GB electricity system , 2017 .

[14]  Paolo Pescetto,et al.  Combined Active Flux and High-Frequency Injection Methods for Sensorless Direct-Flux Vector Control of Synchronous Reluctance Machines , 2018, IEEE Transactions on Power Electronics.

[15]  Lech M. Grzesiak,et al.  Plug-in direct particle swarm repetitive controller with a reduced dimensionality of a fitness landscape – a multi-swarm approach , 2015 .

[16]  Kay Hameyer,et al.  High-Performance Adaptive Torque Control for an IPMSM With Real-Time MTPA Operation , 2017, IEEE Transactions on Energy Conversion.

[17]  Sadegh Hesari,et al.  A New Approach to Improve Induction Motor Performance in Light-Load Conditions , 2017 .

[18]  Yi Wang,et al.  Maximum Torque Per Ampere (MTPA) Control for IPMSM Drives Based on a Variable-Equivalent-Parameter MTPA Control Law , 2019, IEEE Transactions on Power Electronics.

[19]  Jin-Woo Jung,et al.  Improved Torque Ripple Minimization Technique With Enhanced Efficiency for Surface- Mounted PMSM Drives , 2020, IEEE Access.

[20]  Xiaofeng Ding,et al.  Analytical and Experimental Evaluation of SiC-Inverter Nonlinearities for Traction Drives Used in Electric Vehicles , 2018, IEEE Transactions on Vehicular Technology.

[21]  Chi K. Tse,et al.  Synthesis of Multi-Input Multi-Output DC/DC Converters Without Energy Buffer Stages , 2021, IEEE Transactions on Circuits and Systems II: Express Briefs.

[22]  Fan Yang,et al.  Predictive modeling of energy consumption and greenhouse gas emissions from autonomous electric vehicle operations , 2019, Applied Energy.

[23]  David Gerada,et al.  Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system , 2017 .

[24]  Mümtaz Mutluer,et al.  Heuristic Optimization Based on Penalty Approach for Surface Permanent Magnet Synchronous Machines , 2020 .

[25]  Rukmi Dutta,et al.  Direct torque and flux control of interior permanent magnet synchronous machine in deep flux-weakening region , 2018 .

[26]  T. Krink,et al.  Particle swarm optimisation with spatial particle extension , 2002, Proceedings of the 2002 Congress on Evolutionary Computation. CEC'02 (Cat. No.02TH8600).

[27]  Christos Mademlis,et al.  Energy efficiency optimisation in synchronous reluctance motor drives , 2003 .

[28]  Thomas E. Potok,et al.  Distributed Adaptive Particle Swarm Optimizer in Dynamic Environment , 2007, 2007 IEEE International Parallel and Distributed Processing Symposium.

[29]  Yoshifumi Okamoto,et al.  Design Optimization of Synchronous Reluctance Motor for Reducing Iron Loss and Improving Torque Characteristics Using Topology Optimization Based on the Level-Set Method , 2020, IEEE Transactions on Magnetics.

[30]  Phatiphat Thounthong,et al.  Design and control of permanent magnet assisted synchronous reluctance motor with copper loss minimization using MTPA , 2020 .