Faults in conventional flow simulation models: a consideration of representational assumptions and geological uncertainties

Even when geologically based methods are used to determine fault rock permeabilities and thicknesses for input into flow simulators, a wide range of simplifying assumptions regarding fault structure and content are still present. Many of these assumptions are addressed by defining quantitative and flexible methods for realistic parameterization of fault-related uncertainties, and by defining automated methods for including these effects routinely in full-field flow simulation modelling. The fault effects considered include: the two-phase properties of fault rocks; the spatial distributions of naturally variable or uncertain single-phase fault rock properties and fault throws; and the frequencies and properties of sub-resolution fault system or fault zone complexities, including sub-seismic faults, normal drag and damage zones, paired slip surfaces and fault relay zones. Innovative two-phase or geometrical upscaling approaches implemented in a reservoir simulator pre-processor provide transmissibility solutions incorporating the effect, but represented within the geometrical framework of the full-field flow simulation model. The solutions and flexible workflows are applied and discussed within the context of a sensitivity study carried out on two faulted versions of the same full-field flow simulation model. Significant influence of some of these generally neglected fault-related assumptions and uncertainties is revealed.

[1]  Jonny Hesthammer,et al.  Uncertainties associated with fault sealing analysis , 2000, Petroleum Geoscience.

[2]  R. Knipe,et al.  Fault controlled communication in the Sleipner Vest Field, Norwegian Continental Shelf; detailed, quantitative input for reservoir simulation and well planning , 1998, Geological Society, London, Special Publications.

[3]  J. Mykkeltveit,et al.  Effective Relative Permeabilities and Capillary Pressure for One-Dimensional Heterogeneous Media , 1997 .

[4]  Richard R. Hillis,et al.  Estimating fault stability and sustainable fluid pressures for underground storage of CO2 in porous rock , 2004 .

[5]  N. Dawers,et al.  Displacement-length scaling and fault linkage , 1995 .

[6]  Hirofumi Muraoka,et al.  Displacement distribution along minor fault traces , 1983 .

[7]  John A. Howell,et al.  Sedimentological parameterization of shallow-marine reservoirs , 2008, Petroleum Geoscience.

[8]  C. Dart,et al.  Reservoir compartmentalisation by water-saturated faults — Is evaluation possible with today's tools? , 2002 .

[9]  C. Laymon.  A. study , 2018, Predication and Ontology.

[10]  K. Sorbie,et al.  Network Simulations of Flow Processes in Strongly Wetting and Mixed-Wet Porous Media , 1992 .

[11]  Robert J. Knipe,et al.  Fault sealing processes in siliciclastic sediments , 1998, Geological Society, London, Special Publications.

[12]  K. Stephen,et al.  Upscaling uncertainty analysis in a shallow-marine environment , 2008, Petroleum Geoscience.

[13]  Bader Al-Busafi,et al.  Incorporation of fault rock properties into production simulation models , 2005 .

[14]  B. Freeman,et al.  Quantitative Fault Seal Prediction , 1997 .

[15]  R. Myers,et al.  Testing fault transmissibility predictions in a structurally dominated reservoir: Ringhorne field, Norway , 2007 .

[16]  Z. Shipton,et al.  Damage zone and slip-surface evolution over μm to km scales in high-porosity Navajo sandstone, Utah , 2001 .

[17]  Louis J. Durlofsky,et al.  Representation of Fault Zone Permeability in Reservoir Flow Models , 2001 .

[18]  L. Holden,et al.  Havana — a fault modeling tool , 2002 .

[19]  J. Walsh,et al.  A model for the structure and development of fault zones , 1996, Journal of the Geological Society.

[20]  J. R. Fulljames,et al.  Fault seal processes: systematic analysis of fault seals over geological and production time scales , 1997 .

[21]  J. Walsh,et al.  Relay zone geometry and displacement transfer between normal faults recorded in coal-mine plans , 1995 .

[22]  J. Hull.  Thickness-displacement relationships for deformation zones , 1988 .

[23]  J. Walsh,et al.  Fault overlap zones within developing normal fault systems , 1995, Journal of the Geological Society.

[24]  T. Gałkiewicz.  Geofluids: Origin, Migration and Evolution of Fluids in Sedimentary Basins , 1995 .

[25]  R. G. Gibson.  Physical character and fluid-flow properties of sandstone-derived fault zones , 1998, Geological Society, London, Special Publications.

[26]  R. Soliva,et al.  A linkage criterion for segmented normal faults , 2004 .

[27]  J. Walsh,et al.  Outcrop Studies of Shale Smears on Fault Surface , 2009 .

[28]  Q. Fisher,et al.  The importance of incorporating the multi-phase flow properties of fault rocks into production simulation models , 2005 .

[29]  P. Gillespie,et al.  Scaling systematics of fault sizes on a large-scale range fault map , 1996 .

[30]  Tom Manzocchi,et al.  The representation of two phase fault-rock properties in flow simulation models , 2002, Petroleum Geoscience.

[31]  B. Gauthier,et al.  Probabilistic Modeling of Faults Below the Limit of Seismic Resolution in Pelican Field, North Sea, Offshore United Kingdom , 1993 .

[32]  R. Westaway.  Quantitative analysis of populations of small faults , 1994 .

[33]  Graham Yielding,et al.  Sampling of fault populations using sub-surface data: a review , 1996 .

[34]  Robert J. Knipe,et al.  Permeability scaling properties of fault damage zones in siliclastic rocks , 2004 .

[35]  James P. Evans,et al.  Fault zone architecture and permeability structure , 1996 .

[36]  J. J. Walsh,et al.  A Method for Estimation of the Density of Fault Displacements below the Limits of Seismic Resolution in Reservoir Formations , 1990 .

[37]  Jonathan Carter,et al.  Assessing the effect of geological uncertainty on recovery estimates in shallow-marine reservoirs: the application of reservoir engineering to the SAIGUP project , 2008, Petroleum Geoscience.

[38]  G. Yielding.  Shale Gouge Ratio — calibration by geohistory , 2002 .

[39]  Kenneth Stuart Sorbie,et al.  Immiscible flow behaviour in laminated and cross-bedded sandstones , 1993 .

[40]  V. Unnithan,et al.  The spatial distributions of faults and deep sea carbonate mounds in the Porcupine Basin, offshore Ireland , 2003 .

[41]  M. Antonellini,et al.  Effect of Faulting on Fluid Flow in Porous Sandstones: Petrophysical Properties , 1994 .

[42]  R. Knipe,et al.  The impact of faults on fluid flow in the Heidrun Field , 1998, Geological Society, London, Special Publications.

[43]  H. Koyi,et al.  Geometrical analysis of the refraction and segmentation of normal faults in periodically layered sequences , 2007 .

[44]  Z. Shipton,et al.  A conceptual model for the origin of fault damage zone structures in high-porosity sandstone , 2003 .

[45]  K. Heffer,et al.  Scaling Relationships in Natural Fractures: Data, Theory, and Application , 1990 .

[46]  J. Hesthammer,et al.  Spatial relationships within fault damage zones in sandstone , 2000 .

[47]  Andrew Nicol,et al.  Formation of segmented normal faults: a 3-D perspective , 2003 .

[48]  J. D. Matthews,et al.  Sensitivity of the impact of geological uncertainty on production from faulted and unfaulted shallow-marine oil reservoirs: objectives and methods , 2008, Petroleum Geoscience.

[49]  J. D. Matthews,et al.  A study of the structural controls on oil recovery from shallow-marine reservoirs , 2008, Petroleum Geoscience.

[50]  P. Ringrose,et al.  Controls on two-phase fluid flow in heterogeneous sandstones , 1994, Geological Society, London, Special Publications.

[51]  R. Knipe,et al.  Hydrocarbon flow across faults by capillary leakage revisited , 2001 .

[52]  Robert J. Knipe,et al.  The permeability of faults within siliciclastic petroleum reservoirs of the North Sea and Norwegian Continental Shelf , 2001 .

[53]  J. Howell,et al.  Are relay ramps conduits for fluid flow? Structural analysis of a relay ramp in Arches National Park, Utah , 2007, Geological Society, London, Special Publications.

[54]  L. Durlofsky,et al.  Permeability effects of deformation band arrays in sandstone , 2004 .

[55]  D. Faulkner,et al.  Porosity-Permeability Relationships in Clay-bearing Fault Gouge , 2002 .

[56]  G. Mandl.  Discontinuous fault zones , 1987 .

[57]  Tom Manzocchi,et al.  Faulting and fault sealing in production simulation models: Brent Province, northern North Sea , 2007, Petroleum Geoscience.

[58]  J. Walsh,et al.  Complexity in fault zone structure and implications for fault seal prediction , 1997 .

[59]  Tom Manzocchi,et al.  Three-dimensional distinct element modelling of relay growth and breaching along normal faults , 2004 .

[60]  J. Walsh,et al.  Static and dynamic connectivity in bed-scale models of faulted and unfaulted turbidites , 2007 .

[61]  J. Underhill,et al.  Flow through fault systems in high-porosity sandstones , 1998, Geological Society, London, Special Publications.

[62]  C. Bonson,et al.  Geometric and kinematic controls on the internal structure of a large normal fault in massive limestones: The Maghlaq Fault, Malta , 2007 .

[63]  Erlend Øian,et al.  Hierarchical approach for simulating fluid flow in normal fault zones , 2007, Petroleum Geoscience.

[64]  A. Beach,et al.  Reservoir damage around faults; outcrop examples from the Suez Rift , 1999, Petroleum Geoscience.

[65]  Robert J. Knipe,et al.  Empirical estimation of fault rock properties , 2002 .

[66]  J. Walsh,et al.  Geological implications of a large pressure difference across a small fault in the Viking Graben , 2002 .

[67]  P. Gillespie,et al.  Assessment of the effects of sub-seismic faults on bulk permeabilities of reservoir sequences , 1998, Geological Society, London, Special Publications.

[68]  J. Walsh,et al.  Structure and content of the Moab Fault Zone, Utah, USA, and its implications for fault seal prediction , 1998, Geological Society, London, Special Publications.

[69]  George V. Chilingar,et al.  Faulting, fault sealing and fluid flow in hydrocarbon reservoirs. , 2000 .

[70]  J. Walsh,et al.  Strain localisation and population changes during fault system growth within the Inner Moray Firth, Northern North Sea , 2003 .

[71]  A. Nicol,et al.  Definition of a fault permeability predictor from outcrop studies of a faulted turbidite sequence, Taranaki, New Zealand , 2007 .

[72]  S. Flint,et al.  The Geological modelling of hydrocarbon reservoirs and outcrop analogues , 1992 .

[73]  C. Doubre,et al.  Slip accumulation and lateral propagation of active normal faults in Afar , 2001 .

[74]  Tom Manzocchi,et al.  Fault transmissibility multipliers for flow simulation models , 1999, Petroleum Geoscience.