Recent developments and design challenges in continuous roller micro- and nanoimprinting

As an emerging technology for the manufacture of micro- and nano-scale patterns, continuous imprinting; otherwise known as roll-to-roll or roller imprinting, is attracting interest from researchers around the world because of its inherent advantages of low cost, high throughput, large area patterning. This technology is an evolutionary advance on the more traditional nanoimprint lithography developed in the 1990s, which is considered a batch mode, or dis-continuous patterning approach. In recent years, a number of commercial applications have been discovered which require low cost, large area patterning, particularly displays, optical coatings and films, and biological applications such as anti-fouling surfaces and micro-fluidic devices. This review covers a variety of continuous imprinting approaches, highlights challenges, and surveys progress towards high speed production of micro- and nanoscale features for these applications and others using this platform technology.

[1]  Po-Hsun Huang,et al.  Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating , 2009 .

[2]  A. Kinloch.  Adhesion and Adhesives: Science and Technology , 2010 .

[3]  F. Bauerfeld,et al.  Investigations on reel-to-reel hot embossing , 2010 .

[4]  Sukwon Lee,et al.  Micro Pattern Roll Mold for Large Area Display by Electroforming and Wrapping Method , 2009 .

[5]  Nanoimprint lithography of chromophore molecules under high-vacuum conditions , 2004 .

[6]  Bernard Choi,et al.  Step and flash imprint lithography: a new approach to high-resolution patterning , 1999, Advanced Lithography.

[7]  Tomi Haatainen,et al.  Continuous roll to roll nanoimprinting of inherently conducting polyaniline , 2007 .

[8]  Shinill Kang,et al.  Continuous ultraviolet roll nanoimprinting process for replicating large-scale nano-and micropatterns , 2006 .

[9]  Wei Wu,et al.  Fabrication of 5 nm linewidth and 14 nm pitch features by nanoimprint lithography , 2004 .

[10]  J. Boussey,et al.  Chemical degradation of fluorinated antisticking treatments in UV nanoimprint lithography , 2009 .

[11]  Tomi Haatainen,et al.  Continuous Double-Sided Roll-to-Roll Imprinting of Polymer Film , 2008 .

[12]  Moon G. Joo,et al.  Laser Engraving of Micro-patterns on Roll Surfaces , 2002 .

[13]  Chang-Pin Chou,et al.  Fabrication of an antireflective polymer optical film with subwavelength structures using a roll-to-roll micro-replication process , 2008 .

[14]  G. Faini,et al.  Soft UV-NIL at 20nm scale using flexible bi-layer stamp casted on HSQ master mold , 2010 .

[15]  Young-Bae Park,et al.  Fabrication of a tungsten master stamp using self-ordered porous alumina , 2005 .

[16]  Taro Kimura,et al.  Resin micromachining by roller hot embossing , 2008 .

[17]  Hyewon Kang,et al.  Low-Pressure Nanoimprint Lithography , 2004 .

[18]  Ho-Yong Jung,et al.  Fabrication of roll imprint stamp for continuous UV roll imprinting process , 2009 .

[19]  Tien-Li Chang,et al.  Laser interference lithography and nanoimprint techniques for lower reflection transparent conducting oxide hybrid films , 2010 .

[20]  H. Schift,et al.  Surface structuring of textile fibers using roll embossing , 2006 .

[21]  C. Shih,et al.  Efficiency improvement of blended poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 solar cells by nanoimprinting , 2009 .

[22]  R. Cingolani,et al.  Multilevel, room-temperature nanoimprint lithography for conjugated polymer-based photonics. , 2005, Nano letters.

[23]  T. Yanagishita,et al.  Nanoimprinting Using Ni Molds Prepared from Highly Ordered Anodic Porous Alumina Templates , 2006 .

[24]  Barbara Stadlober,et al.  High-performing submicron organic thin-film transistors fabricated by residue-free embossing , 2010 .

[25]  Kee-Bong Choi,et al.  Nanoscale patterning with the double-layered soft cylindrical stamps by means of UV-nanoimprint lithography , 2009 .

[26]  S. Chou,et al.  Roller nanoimprint lithography , 1998 .

[27]  Heon Lee,et al.  Fabrication of high density nano-pillar type phase change memory devices using flexible AAO shaped template , 2010 .

[28]  Shih-Jung Liu,et al.  A novel soft-mold roller embossing method for the rapid fabrication of micro-blocks onto glass substrates , 2006 .

[29]  L. Guo,et al.  Large-area roll-to-roll and roll-to-plate nanoimprint lithography: a step toward high-throughput application of continuous nanoimprinting. , 2009, ACS nano.

[30]  Helmut Schift,et al.  Flow behaviour of thin polymer films used for hot embossing lithography , 2000 .

[31]  Sen-Yue Yang,et al.  A roller embossing process for rapid fabrication of microlens arrays on glass substrates , 2006 .

[32]  Tae-il Kim,et al.  Simple fabrication of nanostructure by continuous rigiflex imprinting , 2007 .

[33]  Kee-Bong Choi,et al.  Nano-scale patterning using the roll typed UV-nanoimprint lithography tool , 2008 .

[34]  J. A. van Kan,et al.  Stamps for nanoimprint lithography fabricated by proton beam writing and nickel electroplating , 2006 .

[35]  Soojin Park,et al.  Self‐Assembly of Block Copolymers on Flexible Substrates , 2010, Advanced materials.

[36]  M. Nakao,et al.  Iterative roller imprint of multilayered nanostructures , 2010 .

[37]  Po-Hsun Huang,et al.  Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platform , 2008 .

[38]  Bo-Young Lee,et al.  Fabrication of transparent conductive tracks and patterns on flexible substrate using a continuous UV roll imprint lithography , 2009 .

[39]  S. Youn,et al.  UV Nanoimprint in Pentafluoropropane at a Minimal Imprint Pressure , 2010 .

[40]  M. Schvartzman,et al.  Fabrication of Nanoscale Bioarrays for the Study of Cytoskeletal Protein Binding Interactions Using Nanoimprint Lithography. , 2009, Journal of vacuum science & technology. B, Microelectronics and nanometer structures : processing, measurement, and phenomena : an official journal of the American Vacuum Society.

[41]  Chih-Yuan Chang,et al.  Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process , 2007 .

[42]  C. Hawker,et al.  Nanodomain control in copolymer thin films , 1998, Nature.

[43]  The fabrication of Co-Pt electro-deposited bit patterned media with nanoimprint lithography. , 2009, Nanotechnology.

[44]  Chih-Yuan Chang,et al.  Direct fabrication of rigid microstructures on a metallic roller using a dry film resist , 2008 .

[45]  Takashi Yanagishita,et al.  Anti-Reflection Structures on Lenses by Nanoimprinting Using Ordered Anodic Porous Alumina , 2009 .

[46]  Thomas Glinsner,et al.  High resolution lithography with PDMS molds , 2004 .

[47]  Tien-Li Chang,et al.  A non-fluorine mold release agent for Ni stamp in nanoimprint process , 2008 .

[48]  Chih-Yuan Chang,et al.  Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resist. , 2007, Optics express.

[49]  L. Jay Guo,et al.  Recent progress in nanoimprint technology and its applications , 2004 .

[50]  Frank Palmieri,et al.  Degradable Cross-Linkers and Strippable Imaging Materials for Step-and-Flash Imprint Lithography , 2008 .

[51]  J. Taniguchi,et al.  Fabrication of a seamless roll mold by direct writing with an electron beam on a rotating cylindrical substrate , 2009 .

[52]  D. Yao,et al.  Replication of Microstructures by Roll-to-Roll UV-Curing Embossing , 2008 .

[53]  H. Low,et al.  Direct imprinting of high resolution TiO2 nanostructures , 2010, Nanotechnology.

[54]  L. Jay Guo,et al.  Bilayer metal wire-grid polarizer fabricated by roll-to-roll nanoimprint lithography on flexible plastic substrate , 2007 .

[55]  Se-Jin Choi,et al.  An ultraviolet-curable mold for sub-100-nm lithography. , 2004, Journal of the American Chemical Society.

[56]  William J. Dauksher,et al.  Advances in Step and Flash imprint lithography , 2003, SPIE Advanced Lithography.

[57]  Hiroshi Goto,et al.  Prototype development of a roller imprint system and its application to large area polymer replication for a microstructured optical device , 2008 .

[58]  Shinill Kang,et al.  Design and fabrication of micro optical film by ultraviolet roll imprinting , 2007 .

[59]  Sum Huan Ng,et al.  Micro-fabrication of polymeric devices using hot roller embossing , 2009 .

[60]  Fabrication of organic light-emitting devices on flexible substrates using a combined roller imprinting and photolithography-patterning technique , 2006 .

[61]  S. Chou,et al.  Imprint Lithography with 25-Nanometer Resolution , 1996, Science.

[62]  A combined-nanoimprint-and-photolithography patterning technique , 2004 .

[63]  Eung-Sug Lee,et al.  Minimization of residual layer thickness by using the optimized dispensing method in S-FILTM process , 2006 .

[64]  Sum Huan Ng,et al.  Investigation of hot roller embossing for microfluidic devices , 2009 .

[65]  Sum Huan Ng,et al.  Hot roller embossing for microfluidics: process and challenges , 2009 .

[66]  Qiangfei Xia,et al.  Self-aligned memristor cross-point arrays fabricated with one nanoimprint lithography step. , 2010, Nano letters.

[67]  M. Fagan,et al.  A novel process for continuous thermal embossing of large-area nanopatterns onto polymer films , 2009 .

[68]  L. Guo,et al.  Large area high density sub-20 nm SiO(2) nanostructures fabricated by block copolymer template for nanoimprint lithography. , 2009, ACS nano.

[69]  Robert M. Metzger,et al.  On the Growth of Highly Ordered Pores in Anodized Aluminum Oxide , 1998 .