Impedance modeling for a unit cell of the square loop frequency selective surface at 2.4 GHz

Equivalent Circuit (EC) method gives a simple alternative method in Frequency Selective Surface (FSS) analyses which are useful for quickly predicting the characteristic of FSS. An impedance modeling of the Equivalent Circuit (EC) for a unit cell of the square loop FSS structure is presented in this paper. The unit cell of the square loop FSS is designed and simulated using the CST Microwave Studio software at 2.4 GHz based on industrial, scientific and medical bands (ISM) standard. The square loop FSS is simulated without FSS, with square FSS and square FSS with slot. The investigation has been done on the length of substrate (s), width of substrate (w), length of square FSS (a), length of square FSS with slot (b) and the number of slots (n). Real (Re) and Imaginary (Im) component of EC or known as resistance and reactance has been modeled based on physical parameters of the design structure of the FSS. The resistance and reactance of the impedance are depending on the geometry of the unit cell of FSS. This impedance modelling can be used to design the advance FSS for the similar ISM band. EC gives a simple alternative method in FSS analyses which are useful for quickly predicting the performance of FSS. The 7th and 8th degree polynomial type has been used to model the component of EC.

[1]  Hiroshi Nakashima,et al.  Scattering from a periodic array of arbitrary shaped elements on a semiinfinite substrate , 1993 .

[2]  A. Williamson,et al.  Equivalent circuit modelling of a frequency selective plasterboard wall , 2005, 2005 IEEE Antennas and Propagation Society International Symposium.

[3]  A. Frenkel,et al.  Absorbing Frequency-Selective-Surface for the mm-Wave Range , 2008, IEEE Transactions on Antennas and Propagation.

[4]  Richard Langley,et al.  Equivalent-circuit models for frequency-selective surfaces at oblique angles of incidence , 1985 .

[5]  Mesut Kartal,et al.  A New Equivalent Circuit Based FSS Design Method by Using Genetic Algorithm , 2010 .

[6]  Mohamad Zoinol Abidin Abdul Aziz,et al.  Impedance modeling for a unit cell of the square loop frequency selective surface at 2.4 GHz , 2013, 2013 IEEE International Conference on RFID-Technologies and Applications (RFID-TA).

[7]  Z. Cendes,et al.  Plane wave scattering from frequency-selective surfaces by the finite-element method , 2002 .

[8]  R. Langley,et al.  Equivalent circuit model for arrays of square loops , 1982 .

[9]  Haifeng Cheng,et al.  Absorbing properties of frequency selective surface absorbers with cross-shaped resistive patches , 2007 .

[10]  Clive Parini,et al.  Equivalent circuit method for analysis and synthesis of frequency selective surfaces , 2006 .

[11]  F. Bayatpur.  Metamaterial-Inspired Frequency-Selective Surfaces. , 2009 .

[12]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[13]  Hang Tuah Jaya.  PHASE SHIFT OF THE TRANSMISSION COEFFICIENTS FOR FREQUENCY SELECTIVE SURFACES , 2013 .