A Flexible Hot-Film Sensor Array for Underwater Shear Stress and Transition Measurement

A flexible hot-film sensor array for wall shear stress, flow separation, and transition measurement has been fabricated and implemented in experiments. Parylene C waterproof layer is vapor phase deposited to encapsulate the sensor. Experimental studies of shear stress and flow transition on a flat plate have been undertaken in a water tunnel with the sensor array. Compared with the shear stress derived from velocity profile and empirical formulas, the measuring errors of the hot-film sensors are less than 5%. In addition, boundary layer transition of the flat plate has also been detected successfully. Ensemble-averaged mean, normalized root mean square, and power spectra of the sensor output voltage indicate that the Reynolds number when transition begins at where the sensor array located is 1.82 × 105, 50% intermittency transition is 2.52 × 105, and transition finishes is 3.96 × 105. These results have a good agreement with the transition Reynolds numbers, as measured by the Laser Doppler Velocimetry (LDV) system.

[1]  F. K. Owen,et al.  Transition experiments on a flat plate at subsonic and supersonic speeds , 1969 .

[2]  Jerry Westerweel,et al.  Turbulence transition in pipe flow , 2007 .

[3]  T. Mullin Experimental Studies of Transition to Turbulence in a Pipe , 2011 .

[4]  Chaoqun Liu,et al.  BOUNDARY LAYER TRANSITION , 1963 .

[5]  Saurabh Singh,et al.  Toward sclera-force-based robotic assistance for safe micromanipulation in vitreoretinal surgery , 2017, 2017 IEEE SENSORS.

[6]  L. N. Persen,et al.  On the measurement of wall shear stress , 1986 .

[7]  Ricardo Vinuesa,et al.  Assessment of uncertainties in hot-wire anemometry and oil-film interferometry measurements for wall-bounded turbulent flows , 2018, European Journal of Mechanics - B/Fluids.

[8]  Ellis Meng,et al.  Micromachined Thermal Flow Sensors - A Review , 2012, Micromachines.

[9]  Ricardo Vinuesa,et al.  Role of data uncertainties in identifying the logarithmic region of turbulent boundary layers , 2014 .

[10]  Ricardo Vinuesa,et al.  Alternative interpretation of the Superpipe data and motivation for CICLoPE : The effect of a decreasing viscous length scale , 2016 .

[11]  D. L. Carraway,et al.  A transition detection study at Mach 1.5, 2.0 and 2.5 using a micro-thin hot-film system , 1989, International Congress on Instrumentation in Aerospace Simulation Facilitie.

[12]  D. Spalding A Single Formula for the “Law of the Wall” , 1961 .

[13]  Yury S. Kachanov,et al.  PHYSICAL MECHANISMS OF LAMINAR-BOUNDARY-LAYER TRANSITION , 1994 .

[14]  B. Bellhouse,et al.  Determination of mean and dynamic skin friction, separation and transition in low-speed flow with a thin-film heated element , 1966, Journal of Fluid Mechanics.

[15]  M. Gad-el-Hak,et al.  MEMS-based pressure and shear stress sensors for turbulent flows , 1999 .

[16]  J. Spurk Boundary Layer Theory , 2019, Fluid Mechanics.

[17]  Sai Ji,et al.  Composite Plate Phased Array Structural Health Monitoring Signal Reconstruction Based on Orthogonal Matching Pursuit Algorithm , 2017, J. Sensors.

[18]  Louis N. Cattafesta,et al.  MEMS Shear Stress Sensors: Promise and Progress , 2004 .

[19]  H. H. Fernholz,et al.  New developments and applications of skin-friction measuring techniques , 1996 .

[20]  Weizheng Yuan,et al.  A flexible hot-film shear stress sensor array and its application to airfoil separation detection , 2017, 2017 IEEE SENSORS.

[21]  K. Winter An outline of the techniques available for the measurement of skin friction in turbulent boundary layers , 1979 .

[22]  Melvin Epstein,et al.  On the Solution of the Laminar Boundary-Layer Equations , 1959 .

[23]  Yu-Chong Tai,et al.  Micromachined thermal shear-stress sensor for underwater applications , 2005, Journal of Microelectromechanical Systems.

[24]  Cheng-Huo Shang,et al.  Effect of annealing on the performance of nickel thermistor on polyimide substrate , 2017 .

[25]  Chih-Ming Ho,et al.  A flexible micromachine-based shear-stress sensor array and its application to separation-point detection , 2000 .

[26]  Jian Luo,et al.  Sensing elements space design of hot-film sensor array considering thermal crosstalk , 2017 .