Abstract : As aircraft continue to increase their power and thermal demands, transient operation of the power and propulsion subsystems can no longer be neglected at the aircraft system level. The performance of the whole aircraft must be considered by examining the dynamic interactions between the power, propulsion, and airframe subsystems. Larger loading demands placed on the power and propulsion subsystems result in thrust, speed, and altitude transients that affect the aircraft performance and capability. This results in different operating and control parameters for the engine that can be properly captured only in an integrated system-level test. While it is possible to capture the dynamic interactions between these aircraft subsystems by using simulations alone, the complexity of the resulting system model has a high computational cost. This paper investigates the possibility of using hardware-in-the-loop (HIL) power extraction with real time simulation of the airframe and propulsion subsystems.
[1]
Peter Lamm,et al.
Transient Analysis of an Aircraft/Propulsion System with Hardware-in-the-Loop Power Extraction
,
2007
.
[2]
Michael Boyd,et al.
Transient Turbine Engine Modeling with Hardware-in-the-Loop Power Extraction (PREPRINT)
,
2008
.
[3]
Jason Wells,et al.
Integrated Hardware-in-the-Loop Simulation of a Complex Turbine Engine and Power System
,
2006
.
[4]
Jason Wells,et al.
Transient Turbine Engine Modeling and Real-Time System Integration Prototyping
,
2006
.
[5]
Juri Jatskevich,et al.
A Distributed Heterogeneous Simulation of a Representative Aircraft Power System
,
2002
.