Tracking of Metallic Objects Using a Retro-Reflective Array at 26 GHz

The detection and tracking of targets in highly cluttered environments often poses a difficult engineering challenge as the strong clutter backscatter contained in the scene makes it difficult to distinguish the target of interest. A design concept to aide in standoff detection and tracking of large metallic objects in a warehouse setting is presented. This includes the design and implementation of an active retro-reflective array system that is able to determine the precise location and identification of an object. To accomplish this, a unique series fed grounded coplanar waveguide patch antenna is designed and implemented with minimal cross coupling among elements. This compact array has a relatively large radar cross-section (RCS) while maintaining the desired retro-reflectivity. Additionally, a tilted beam is incorporated in the linear series-fed array to isolate the large RCS of the planar array structure at boresight from the desired modulated, retro-reflective RCS. This method for enhanced detection is implemented at 26 GHz. The incorporation of the high-speed PIN switches into the array structure provide the tag with a unique identification. Measurement results for the modulated RCS from such an array in a cluttered environment are presented.

[1]  Shyh-Jong Chung,et al.  A novel card-type transponder designed using retrodirective antenna array , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[2]  E. Sharp,et al.  Van Atta reflector array , 1960 .

[3]  Kai Chang,et al.  A retrodirective microstrip antenna array , 1998 .

[4]  T. Metzler.  Microstrip series arrays , 1981 .

[5]  Shyh-Jong Chung,et al.  24 GHz active retrodirective antenna array , 1999 .

[6]  Kamal Sarabandi,et al.  Tracking of metallic targets using a retro-reflective array at 26 GHz , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[7]  Masaharu Fujita.  Development of a retrodirective PARC for ALOS/PALSAR calibration , 2003, IEEE Trans. Geosci. Remote. Sens..

[8]  M. Izutsu,et al.  Coplanar patch antennas: principle, simulation and experiment , 2001, IEEE Antennas and Propagation Society International Symposium. 2001 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.01CH37229).

[9]  E. Gruenberg,et al.  Satellite communications relay system using a retrodirective space antenna , 1964 .

[10]  Kai Chang,et al.  A broadband van atta retrodirective array for ka-band applications , 2007, 2007 IEEE Antennas and Propagation Society International Symposium.

[11]  D. Pozar.  Radiation and scattering from a microstrip patch on a uniaxial substrate , 1987 .

[12]  Kamal Sarabandi,et al.  A 26 GHz retro-reflective array for long-range RFID applications , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.