3D Printed Graphene Electrodes' Electrochemical Activation.

Three-dimensional (3D) printing technologies are emerging as an important tool for the manufacturing of electrodes for various electrochemistry applications. It has been previously shown that metal 3D electrodes, modified with metal oxides, are excellent catalysts for various electrochemical energy and sensing applications. However, the metal 3D printing process, also known as selective laser melting, is extremely costly. One alternative to metal-based electrodes for the aforementioned electrochemical applications is graphene-based electrodes. Nowadays, the printing of polymer-/graphene-based electrodes can be carried out in a matter of minutes using cheap and readily available 3D printers. Unfortunately, these polymer/graphene electrodes exhibit poor electrochemical activity in their native state. Herein, we report on a simple activation method for graphene/polymer 3D printed electrodes by a combined solvent and electrochemical route. The activated electrodes exhibit a dramatic increase in electrochemical activity with respect to the [Fe(CN)6]4-/3- redox couple and the hydrogen evolution reaction. Such in situ activation can be applied on-demand, thus providing a platform for the further widespread utilization of 3D printed graphene/polymer electrodes for electrochemistry.

[1]  M. Pumera,et al.  3D Printed Electrodes for Detection of Nitroaromatic Explosives and Nerve Agents. , 2017, Analytical chemistry.

[2]  Mohd Adzir Mahdi,et al.  Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices , 2018, Scientific Reports.

[3]  Martin Pumera,et al.  Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices , 2016 .

[4]  Shinji Kanehashi,et al.  Effects of various liquid organic solvents on solvent-induced crystallization of amorphous poly(lactic acid) film , 2013 .

[5]  A. Mills,et al.  Adams Method Prepared Metal Oxide Catalysts for Solar‐Driven Water Splitting , 2018 .

[6]  M. Pumera,et al.  MoSe2 Dispersed in Stabilizing Surfactant Media: Effect of the Surfactant Type and Concentration on Electron Transfer and Catalytic Properties. , 2018, ACS applied materials & interfaces.

[7]  W. Blau,et al.  Synthesis and Analysis of Thin Conducting Pyrolytic Carbon Films , 2012 .

[8]  Feng Zhang,et al.  3D Printing of Graphene Aerogels. , 2016, Small.

[9]  María Pedrero,et al.  Electrochemical activation of screen-printed carbon strips , 1996 .

[10]  Martin Pumera,et al.  Additive manufacturing of electrochemical interfaces: Simultaneous detection of biomarkers , 2018, Applied Materials Today.

[11]  M. Bertotti,et al.  3D printing scanning electron microscopy sample holders: A quick and cost effective alternative for custom holder fabrication , 2017, PloS one.

[12]  M. Pumera,et al.  Morphological Effects and Stabilization of the Metallic 1T Phase in Layered V-, Nb-, and Ta-Doped WSe2 for Electrocatalysis. , 2018, Chemistry.

[13]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[14]  R. Compton,et al.  Nanotrench arrays reveal insight into graphite electrochemistry. , 2005, Angewandte Chemie.

[15]  M. Pumera,et al.  Relationship between carbon nanotube structure and electrochemical behavior: heterogeneous electron transfer at electrochemically activated carbon nanotubes. , 2008, Chemistry, an Asian journal.

[16]  D. Ruch,et al.  Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure , 2011 .

[17]  R. McCreery,et al.  Advanced carbon electrode materials for molecular electrochemistry. , 2008, Chemical reviews.

[18]  M. Pumera,et al.  Inherent electrochemistry and activation of chemically modified graphenes for electrochemical applications. , 2012, Chemistry, an Asian journal.

[19]  Martin Pumera,et al.  3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis. , 2018, Analytical chemistry.

[20]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[21]  G. Ciapetti,et al.  Combined Optoelectronic and Electrochemical Study of Nitrogenated Carbon Electrodes , 2017 .

[22]  George Kenanakis,et al.  3D printed graphene-based electrodes with high electrochemical performance , 2017 .

[23]  Joseph Wang,et al.  Electrochemical activation of carbon nanotubes , 2005 .

[24]  T. Perova,et al.  Continuous Flow Synthesis of Platinum Nanoparticles in Porous Carbon as Durable and Methanol‐Tolerant Electrocatalysts for the Oxygen Reduction Reaction , 2018 .

[25]  S. Cosnier,et al.  Electroanalytical Sensing Properties of Pristine and Functionalized Multilayer Graphene , 2014 .

[26]  M. Pumera,et al.  Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting , 2018 .

[27]  R. McCreery,et al.  Mechanism of electrochemical activation of carbon electrodes: role of graphite lattice defects , 1989 .

[28]  M. Lyons,et al.  The Redox Behaviour of Randomly Dispersed Single Walled Carbon Nanotubes both in the Absence and in the Presence of Adsorbed Glucose Oxidase , 2006 .

[29]  Philip J. Kitson,et al.  Integrated 3D-printed reactionware for chemical synthesis and analysis. , 2012, Nature chemistry.

[30]  K. Laasonen,et al.  Electrochemical Activation of Single-Walled Carbon Nanotubes with Pseudo-Atomic-Scale Platinum for the Hydrogen Evolution Reaction , 2017 .

[31]  Richard S. Nicholson,et al.  Theory and Application of Cyclic Voltammetry for Measurement of Electrode Reaction Kinetics. , 1965 .

[32]  Martin Pumera,et al.  (Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors , 2018, TrAC Trends in Analytical Chemistry.

[33]  Yan Zhang,et al.  3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.

[34]  Xiaoyu Zheng,et al.  Multiscale metallic metamaterials. , 2016, Nature materials.