Inkjet printing as a technique for filling of micro-wells with biocompatible polymers

We present an innovative technique to dispense precise amounts of polymer solutions into large arrays of microscopic wells. An inkjet printer (NP 2.1 GeSim, Germany) is used to fill micro-wells with poly (vinyl pyrrolidone) (PVP K10). The micro-wells are fabricated with cavity diameters of 300@mm down to 50@mm with SU-8 with two steps of negative photolithography. Inkjet printing is shown to be a suitable technique to dispense defined volumes of solution (down to 0.3nL) in a highly reproducible way. The filling with polymer can be controlled varying the concentration of the solution and the number of dispensed droplets. Solutions of up to 20 wt.% PVP in water are successfully spotted.

[1]  Vivek Subramanian,et al.  Hydrostatic optimization of inkjet-printed films. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[2]  Mohammed Taghi Zafarani-Moattar,et al.  THERMODYNAMICS OF AQUEOUS SOLUTIONS OF POLYVINYLPYRROLIDONE , 2004 .

[3]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[4]  Christopher S. Chen,et al.  Simple approach to micropattern cells on common culture substrates by tuning substrate wettability. , 2004, Tissue engineering.

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  O. Higa,et al.  Biocompatibility study for PVP wound dressing obtained in different conditions , 1999 .

[7]  David B. Wallace,et al.  Applicatons of Ink-Jet Printing Technology to BioMEMS and Microfluidic Systems , 2002 .

[8]  M. Alexander,et al.  Inkjet printing as a novel medicine formulation technique. , 2011, Journal of controlled release : official journal of the Controlled Release Society.

[9]  J Dressman,et al.  Improving drug solubility for oral delivery using solid dispersions. , 2000, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[10]  S. Hauschild,et al.  Direct preparation and loading of lipid and polymer vesicles using inkjets. , 2005, Small.

[11]  Andrew G. Glen,et al.  APPL , 2001 .

[12]  Loïc Jacot-Descombes,et al.  Fabrication of epoxy spherical microstructures by controlled drop-on-demand inkjet printing , 2012 .

[13]  Qingbin Liu,et al.  High precision solder droplet printing technology and the state-of-the-art , 2001 .

[14]  A M Tsatsakis,et al.  Amphiphilic poly-N-vinylpyrrolidones: synthesis, properties and liposome surface modification. , 2001, Biomaterials.

[15]  T Goldmann,et al.  DNA-printing: utilization of a standard inkjet printer for the transfer of nucleic acids to solid supports. , 2000, Journal of biochemical and biophysical methods.

[16]  G. Whitesides,et al.  Fabricating large arrays of microwells with arbitrary dimensions and filling them using discontinuous dewetting. , 1998, Analytical chemistry.

[17]  Rebecca S. Shawgo,et al.  Biocompatibility and biofouling of MEMS drug delivery devices. , 2003, Biomaterials.

[18]  L. Cauller,et al.  Biocompatible SU-8-Based Microprobes for Recording Neural Spike Signals From Regenerated Peripheral Nerve Fibers , 2008, IEEE Sensors Journal.

[19]  Takao Someya,et al.  Low operation voltage of inkjet-printed plastic sheet-type micromechanical switches , 2008 .

[20]  Microlenses with defined contour shapes. , 2011, Optics express.

[21]  T. Boland,et al.  Inkjet printing for high-throughput cell patterning. , 2004, Biomaterials.