Regeneration of used sand with sodium silicate binder by wet method and their core manufacturing

[1]  Jae Ho Baek,et al.  The Effect of the Surface Energy of Water Glass on the Fluidity of Sand , 2020 .

[2]  L. Varga,et al.  Examination of Behavior from Selected Foundry Sands with Alkali Silicate-Based Inorganic Binders , 2020, Metals.

[3]  Z. Fan,et al.  Investigation of parameters and mechanism of ultrasound-assisted wet reclamation of waste sodium silicate sands , 2018 .

[4]  Man Kit Sam Lee,et al.  Effect of Additives on the Sand Burning of Inorganic Binder in Al-Si7Mg Alloy Casting , 2018 .

[5]  C. A. Moraes,et al.  Thermal regeneration of waste foundry phenolic sand in a lab scale fluidized bed , 2018 .

[6]  K. Granat,et al.  Influence of wet activation of used inorganic binder on cyclically refreshed water glass moulding sands hardened by microwaves , 2016 .

[7]  M. Holtzer,et al.  Influence of a Reclaimed Sand Addition to Moulding Sand with Furan Resin on Its Impact on the Environment , 2015, Water, Air and Soil Pollution.

[8]  常云峰,et al.  Method utilizing ultrasonic technology to regenerate used sodium silicate sand , 2014 .

[9]  Yong-liang Ma,et al.  [Characteristics of volatile organic compounds (VOCs) emission from electronic products processing and manufacturing factory]. , 2013, Huan jing ke xue= Huanjing kexue.

[10]  L. Duan,et al.  Hazardous air pollutant formation from pyrolysis of typical Chinese casting materials. , 2011, Environmental science & technology.

[11]  N. Tiedje,et al.  Emission of organic compounds from mould and core binders used for casting iron, aluminium and bronze in sand moulds , 2010, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[12]  Xiaofang Yang,et al.  A study of sodium silicate in aqueous solution and sorbed by synthetic magnetite using in situ ATR-FTIR spectroscopy. , 2008, Journal of colloid and interface science.

[13]  Meera K. Joseph,et al.  Moulding Sand Recycling and Reuse in Small Foundries , 2017 .

[14]  Z. Stefański,et al.  Effect of additives promoting the formation of lustrous carbon on the knocking out properties of foundry sands with new inorganic binders , 2009 .

[15]  Z. Fan,et al.  Dry reusing and wet reclaiming of used sodium silicate sand * , 2008 .

[16]  Huang,et al.  An improved sodium silicate binder modified by ultra-fine powder materials , 2007 .

[17]  Ki-young Kim,et al.  Quantitative Prediction of Gas Evolved by Shell Core in Permanent Mold Casting of Aluminum Alloy , 1998 .