A Hybrid Active Gate Drive for Switching Loss Reduction and Voltage Balancing of Series-Connected IGBTs

Insulated gate bipolar transistors (IGBTs) are usually connected in series to form high-voltage switches in power electronics applications. However, the series operation of IGBTs is not easy due to the unbalanced voltage sharing between them, especially during the switching transients and the tail-current period. In this paper, a hybrid active gate drive is presented for both switching loss reduction and voltage balancing of the series-connected IGBTs. Compared with the conventional gate drive, the proposed method allows dynamical adjustment of the switching speed of IGBTs; thus the switching loss can be suppressed without increasing the current and voltage stresses of the power device. For series connection, the transient voltage sharing is achieved by using an adaptive control method, while the voltage balancing during the tail-current period is optimized by a low-loss snubber circuit. The performance of the proposed hybrid active gate drive and control method has been validated by experimental results.

[1]  M. Fasching,et al.  Series connection of high voltage IGBT modules , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[2]  K. Matsuse,et al.  Voltage balancing method for IGBTs connected in series , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[3]  Muhammad H. Rashid,et al.  Power Electronics: Circuits, Devices and Applications , 1993 .

[4]  D. Chamund,et al.  Review of series and parallel connection of IGBTs , 2006 .

[5]  Fan Zhang,et al.  Voltage balancing optimization of series-connected IGBTs in solid-state breaker by using driving signal adjustment technique , 2015, 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).

[6]  Fei Wang,et al.  Development of a Scalable Power Semiconductor Switch (SPSS) , 2007, IEEE Transactions on Power Electronics.

[7]  A. Piazzesi,et al.  Suitability and optimization of high-voltage IGBTs for series connection with active voltage clamping , 2005, IEEE Transactions on Power Electronics.

[8]  Kwang-Cheol Ko,et al.  Active Clamping Circuit to Suppress Switching Stress on a MOS-Gate-Structure-Based Power Semiconductor for Pulsed-Power Applications , 2011, IEEE Transactions on Plasma Science.

[9]  Nadir Idir,et al.  Turn-on Performance of Reverse Blocking IGBT (RB IGBT) and Optimization Using Advanced Gate Driver , 2010, IEEE Transactions on Power Electronics.

[10]  P. Hofer,et al.  Gate-control strategies for snubberless operation of series connected IGBTs , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[11]  R. Withanage,et al.  Series connection of insulated gate bipolar transistors (IGBTs) , 2005, 2005 European Conference on Power Electronics and Applications.

[12]  Salvatore Musumeci,et al.  Control of the switching transients of IGBT series strings by high-performance drive units , 2001, IEEE Trans. Ind. Electron..

[13]  P.J. Grbovic,et al.  An IGBT Gate Driver for Feed-Forward Control of Turn-on Losses and Reverse Recovery Current , 2008, IEEE Transactions on Power Electronics.

[14]  Zhengming Zhao,et al.  Active Clamping Circuit With Status Feedback for Series-Connected HV-IGBTs , 2014, IEEE Transactions on Industry Applications.

[15]  I. Baraia,et al.  An Experimentally Verified Active Gate Control Method for the Series Connection of IGBT/Diodes , 2012, IEEE Transactions on Power Electronics.

[16]  Zhengming Zhao,et al.  Series-Connected HV-IGBTs Using Active Voltage Balancing Control With Status Feedback Circuit , 2015, IEEE Transactions on Power Electronics.

[17]  Fang Z. Peng,et al.  Closed-Loop Gate Drive for High Power IGBTs , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[18]  Leon M. Tolbert,et al.  A di/dt Feedback-Based Active Gate Driver for Smart Switching and Fast Overcurrent Protection of IGBT Modules , 2014, IEEE Transactions on Power Electronics.

[19]  J. Saiz,et al.  Optimisation and integration of an active clamping circuit for IGBT series association , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[20]  S. J. Finney,et al.  Series-Connected IGBTs Using Active Voltage Control Technique , 2013, IEEE Transactions on Power Electronics.

[21]  Ueda Shigeta,et al.  Active-gate-control for Snubberless IGBTs connected in Series , 2002 .

[22]  Bjoern Wittig,et al.  Analysis and Comparison of Turn-off Active Gate Control Methods for Low-Voltage Power MOSFETs With High Current Ratings , 2012, IEEE Transactions on Power Electronics.

[23]  C. Gerster.  Fast high-power/high-voltage switch using series-connected IGBTs with active gate-controlled voltage-balancing , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[24]  H. Nakatake,et al.  Series connection of IGBTs used multilevel clamp circuit and turn off timing adjustment circuit , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[25]  Heung-Geun Kim,et al.  High voltage switch using series-connected IGBTs with simple auxiliary circuit , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[26]  Ralph Kennel,et al.  Cellular driver/snubber scheme for series connection of IGCTs , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[27]  K. Fink,et al.  Advanced Gate Drive Unit With Closed-Loop $di_{{C}}/dt$ Control , 2013, IEEE Transactions on Power Electronics.