Enhancement in dispersoid precipitation and dispersion strengthening by prior deformation in an Al–Mg–Mn alloy

[1]  Z. Jia,et al.  The interactive effect of alloy composition and pre-straining on the precipitation behavior of Al–Mg–Si–Cu alloys , 2022, Materials Science and Engineering: A.

[2]  D. Mondal,et al.  Superior High Temperature Creep Resistance of a Cast Al-Mg-Ca-Sc Alloy with Multi-Scale Hierarchical Microstructures , 2022, SSRN Electronic Journal.

[3]  M. Gao,et al.  Microstructural evolution and mechanical property of Al–Mg–Mn alloys with various solidification cooling rates , 2021, Materials Characterization.

[4]  Kun Liu,et al.  Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy , 2021, Materials Characterization.

[5]  Bin Wang,et al.  Study of pre-strain before artificial aging on mechanical property and stress corrosion behavior of 2297 Al–Cu–Li alloy , 2021, Materials Science and Engineering: A.

[6]  Jihua Chen,et al.  Dynamic recrystallization, texture and mechanical properties of high Mg content Al–Mg alloy deformed by high strain rate rolling , 2021, Transactions of Nonferrous Metals Society of China.

[7]  Yanjun Li,et al.  Synergistic strengthening by nano-sized α-Al(Mn,Fe)Si and Al3Zr dispersoids in a heat-resistant Al–Mn–Fe–Si–Zr alloy , 2021, Materials Science and Engineering: A.

[8]  M. Zha,et al.  Stabilizing a severely deformed Al–7Mg alloy with a multimodal grain structure via Mg solute segregation , 2021 .

[9]  Xianfeng Li,et al.  Effect of pretreatment on microstructural stability and mechanical property in a spray formed Al-Zn-Mg-Cu alloy , 2021 .

[10]  Yun-lai Deng,et al.  Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified , 2020 .

[11]  Daniel Marchand,et al.  Giant Hardening Response in AlMgZn(Cu) Alloys , 2020, Acta Materialia.

[12]  N. Parson,et al.  Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing , 2020, Journal of Materials Science & Technology.

[13]  Xiaohua Chen,et al.  Micro-alloying effect of Er and Zr on microstructural evolution and yield strength of Al-3Cu (wt.%) binary alloys , 2020, Materials Science and Engineering: A.

[14]  Kun Liu,et al.  Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys , 2020, Journal of Materials Science & Technology.

[15]  Z. Yin,et al.  On the role of Sc or Er micro-alloying in the microstructure evolution of Al-Mg alloy sheets during annealing , 2019, Materials Characterization.

[16]  Ying Deng,et al.  Microstructure characteristics and mechanical properties of new aerospace Al-Mg-Mn alloys with Al3(Sc1−xZrx) or Al3(Er1−xZrx) nanoparticles , 2019, Materials Characterization.

[17]  F. Qiu,et al.  Strain-induced precipitation kinetics during non-isothermal annealing of Al-Mn alloys , 2018 .

[18]  Z. H. Li,et al.  Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents , 2017 .

[19]  Z. Ma,et al.  Enhanced Mechanical Properties of Friction Stir Welded 5083Al-H19 Joints with Additional Water Cooling , 2017 .

[20]  Xiuyan Li,et al.  Playing with defects in metals. , 2017, Nature materials.

[21]  Kun Liu,et al.  Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy , 2017 .

[22]  Jianfeng Yan,et al.  Study of β precipitation and layer structure formation in Al 5083: The role of dispersoids and grain boundaries , 2017 .

[23]  Kun Liu,et al.  Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy , 2017 .

[24]  O. Engler,et al.  Control of second-phase particles in the Al-Mg-Mn alloy AA 5083 , 2016 .

[25]  I. Golovin,et al.  Effect of homogenisation treatment on precipitation, recrystallisation and properties of Al – 3% Mg – TM alloys (TM = Mn, Cr, Zr) , 2016 .

[26]  Yanjun Li,et al.  Two-stage annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states , 2015 .

[27]  O. Engler,et al.  Impact of homogenization on particles in the Al–Mg–Mn alloy AA 5454 – Experiment and simulation , 2013 .

[28]  Yanjun Li,et al.  Precipitation crystallography of plate-shaped Al6(Mn,Fe) dispersoids in AA5182 alloy , 2012 .

[29]  Yan-qing Su,et al.  3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at.%Mn alloy , 2012 .

[30]  T. Radetić,et al.  Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment , 2012 .

[31]  A. M. Muggerud,et al.  Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy , 2012 .

[32]  B. Ou,et al.  Evolution of precipitation during different homogenization treatments in a 3003 aluminum alloy , 2009 .

[33]  Y. Birol.  Homogenization of a twin-roll cast thin Al–Mn strip , 2009 .

[34]  W. Pantleon.  Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction , 2008 .

[35]  R. Kirk,et al.  Observation of Giant Diffusivity Along Dislocation Cores , 2008, Science.

[36]  A. Deschamps,et al.  Modelling the precipitation of NbC on dislocations in α-Fe , 2007 .

[37]  K. Marthinsen,et al.  Rapid precipitation of dispersoids during extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-alloy , 2006 .

[38]  D. Eskin,et al.  Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys , 2005 .

[39]  L. Arnberg,et al.  Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization , 2003 .

[40]  V. D. Zwaag,et al.  Effect of microsegregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy AA3003 , 2003 .

[41]  C. M. Sellars,et al.  Modelling the kinetics of strain induced precipitation in Nb microalloyed steels , 2001 .

[42]  C. M. Sellars,et al.  Mechanism and kinetics of strain induced precipitation of Nb(C,N) in austenite , 1992 .

[43]  S. Pennycook,et al.  Formation of an Al6Mn precipitate in aluminum annealed after implantation with 3.5 atomic percent manganese , 1988 .

[44]  J. Cahn,et al.  Formation and stability range of the G phase in the AlMn system , 1986 .

[45]  K. C. Russell.  Nucleation in solids: The induction and steady state effects , 1980 .

[46]  G. M. Pound,et al.  Nucleation of a second solid phase along dislocations , 1973, Metallurgical and Materials Transactions B.

[47]  Weiweng Zhang,et al.  Revealing the Influence of Fe on Fe-Rich Phases Formation and Mechanical Properties of Cast Al-Mg-Mn-Fe Alloys , 2021, Social Science Research Network.

[48]  C. R. Deepak,et al.  Mechanical and corrosion behaviour of aluminum alloy 5083 and its weldment for marine applications , 2020 .