Assessing Mold Risks in Buildings under Uncertainty

[1]  J. Niu,et al.  Moisture Generation through Chinese Household Activities , 2004 .

[2]  Ocg Olaf Adan,et al.  On the fungal defacement of interior finishes , 1994 .

[3]  Antti Hanhijärvi,et al.  Modelling mould growth and decay damages , 2000 .

[4]  Carsten Rode,et al.  Synchronous calculation of transient hygrothermal conditions of indoor spaces and building envelopes , 2001 .

[5]  Harriet A. Burge,et al.  Dynamics of Airborne Fungal Populations in a Large Office Building , 2000, Current Microbiology.

[6]  Mario Grosso,et al.  Fundamentals of the Multizone Air Flow Model - COMIS , 1990 .

[7]  A. Rosenfeld,et al.  Estimates of Improved Productivity and Health from Better Indoor Environments , 1997 .

[8]  Klaus Sedlbauer,et al.  Prediction of Mould Growth by Hygrothermal Calculation , 2002 .

[9]  John Straube,et al.  Moisture in Buildings , 2002 .

[10]  Joseph W. Lstiburek,et al.  Moisture Control Handbook: Principles and Practices for Residential and Small Commercial Buildings , 1993 .

[11]  Nakhi,et al.  Thermal Bridge Assessments , 2022 .

[12]  Pentti Kalliokoski,et al.  Occurrence and moisture requirements of microbial growth in building materials , 1992 .

[13]  John Straube,et al.  Overview of Hygrothermal ( HAM ) Analysis Methods , 2001 .

[14]  Russell D. Taylor,et al.  LINKING THE COMIS MULTI-ZONE AIRFLOW MODEL WITH THE ENERGYPLUS BUILDING ENERGY SIMULATION PROGRAM , 1999 .

[15]  A. Hwang.  [Thermal comfort]. , 1990, Taehan kanho. The Korean nurse.

[16]  Carl-Gustaf Bornehag,et al.  Dampness in Buildings and Health - report from an ongoing epidemiological investigation in Sweden , 2005 .

[17]  Helmut E. Feustel,et al.  COMIS—an international multizone air-flow and contaminant transport model , 1998 .

[18]  B. Shelton,et al.  Profiles of Airborne Fungi in Buildings and Outdoor Environments in the United States , 2002, Applied and Environmental Microbiology.

[19]  Anton Ten Wolde.  Mold and Decay in TriState Homes , .

[20]  Hannu Viitanen,et al.  The response of building materials to the mould exposure at different humidity and temperature conditions , 2000 .

[21]  U. Tapper,et al.  Deposition of indoor aerosols as determined by PIXE analysis , 1987 .

[22]  Markus Olin,et al.  Indoor Air Aerosol Model: Transport Indoors and Deposition of Fine and Coarse Particles , 1989 .

[23]  Kevin J. Lomas,et al.  Sensitivity analysis techniques for building thermal simulation programs , 1992 .

[24]  Godfried Augenbroe,et al.  Analysis of uncertainty in building design evaluations and its implications , 2002 .

[25]  Andrew K. Persily,et al.  Input Data for Multizone Airflow and IAQ Analysis | NIST , 2001 .

[26]  S. T. Hill,et al.  Influence of temperature and water activity on germination and growth of Aspergillus restrictus and A. versicolor , 1982 .

[27]  Hugo Hens,et al.  Fungal Defacement in Buildings: A Performance Related Approach , 1999 .

[28]  J. C. Helton,et al.  A COMPARISON OF UNCERTAINTY AND SENSITIVITY ANALYSIS TECHNIQUES FOR COMPUTER MODELS , 1985 .

[29]  R. Cooke.  Experts in Uncertainty: Opinion and Subjective Probability in Science , 1991 .

[30]  S. Isukapalli.  UNCERTAINTY ANALYSIS OF TRANSPORT-TRANSFORMATION MODELS , 1999 .

[31]  A J Gadgil,et al.  Responding to sudden pollutant releases in office buildings: 1. Framework and analysis tools. , 2003, Indoor air.

[32]  Neil J. Rowan,et al.  Prediction of Toxigenic Fungal Growth in Buildings by Using a Novel Modelling System , 1999, Applied and Environmental Microbiology.

[33]  K. Sedlbauer,et al.  Mold Growth on ETICS (EIFS) as a Result of ‘‘Bad Workmanship’’? , 2002 .

[34]  G. Ayerst,et al.  The effects of moisture and temperature on growth and spore germination in some fungi. , 1969 .

[35]  Max D. Morris,et al.  Factorial sampling plans for preliminary computational experiments , 1991 .

[36]  Lewis G. Harriman.  The Dehumidification Handbook Second Edition , 2002 .

[37]  Terry Andres,et al.  Sensitivity analysis of model output: an investigation of new techniques , 1993 .

[38]  J. H. Burnett,et al.  Fundamentals of Mycology , 1969 .

[39]  Tamás Csoknyai.  Surface Temperature a Thermal Bridges , 2001 .

[40]  G. Cass,et al.  Protecting museum collections from soiling due to the deposition of airborne particles , 1991 .

[41]  L J Swenson,et al.  Health effects of mycotoxins in indoor air: a critical review. , 2000, Applied occupational and environmental hygiene.

[42]  C. O. Pedersen,et al.  Modeling the energy effects of combined heat and mass transfer in building elements: Part 1 -- Theory , 1999 .

[43]  Hr Trechsel,et al.  Overview of ASTM MNL 40, Moisture Analysis and Condensation Control in Building Envelopes , 2001 .

[44]  J Clarke.  Development of a Simulation Tool for Mould Growth Prediction in Buildings , 1997 .

[45]  William P. Bahnfleth,et al.  Filtration of airborne microorganisms: Modeling and prediction , 1999 .

[46]  Joseph Andrew Clarke,et al.  A technique for the prediction of the conditions leading to mould growth in buildings , 1999 .

[47]  Andreas Holm,et al.  Practical application of an uncertainty approach for hygrothermal building simulations—drying of an AAC flat roof , 2002 .

[48]  Brian J. Meacham,et al.  UNDERSTANDING RISK i , 2001 .

[49]  M. S. De Wit,et al.  Identification of the important parameters in thermal building simulation models , 1997 .

[50]  Robert Alan Arthur.  Damp Indoor Spaces and Health. Institute of Medicine: Committee on Damp Indoor Spaces and Health. The National Academy Press. ISBN 0-309-09193-4. Washington, D.C. 2004, pp. 355. , 2005 .

[51]  Hartwig M. Künzel,et al.  Calculation of heat and moisture transfer in exposed building components , 1996 .

[52]  Pentti Kalliokoski,et al.  Fungal growth and survival in building materials under fluctuating moisture and temperature conditions , 2000 .

[53]  Andrew K. Persily,et al.  Airtightness of Commercial and Institutional Buildings: Blowing Holes in the Myth of Tight Buildings | NIST , 1998 .

[54]  M. Kumaran.  Interlaboratory Comparison of the ASTM Standard Test Methods for Water Vapor Transmission of Materials (E 96-95) , 1998 .

[55]  Clarke J A Macdonald I A,et al.  ASSESSING UNCERTAINTY IN BUILDING SIMULATION , 1999 .

[56]  Hugo Hens,et al.  Heat-air-moisture design of masonry cavity walls: Theoretical and experimental results and practice , 1995 .

[57]  Liisa Pirjola,et al.  Indoor air aerosol model: the effect of outdoor air, filtration and ventilation on indoor concentrations , 1999 .

[58]  H. Künzel.  Simultaneous Heat and Moisture Transport in Building Components: One-and two-dimensional calculation , 1995 .

[59]  M. S. De Wit,et al.  Uncertainty in predictions of thermal comfort in buildings , 2001 .

[60]  D. H. Jennings,et al.  Fungal Biology: Understanding the Fungal Lifestyle , 1999 .

[61]  Edward Arens,et al.  Indoor humidity and human health. Part 1: Literature review of health effects of humidity-influenced indoor pollutants , 1996 .

[62]  Godfried Augenbroe,et al.  Quantification methods of technical building performance , 2005 .

[63]  Stefano Tarantola,et al.  Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models , 2004 .

[64]  H. Burge.  An update on pollen and fungal spore aerobiology. , 2002, The Journal of allergy and clinical immunology.

[65]  Andreas Holm,et al.  Stochastic Building Envelope Modeling— The Influence of Material , 1995 .

[66]  Abdullatif E. Nakhi.  ADAPTIVE CONSTRUCTION MODELLING WITHIN WHOLE BUILDING DYNAMIC SIMULATION , 1995 .

[67]  Abdullatif Ben-Nakhi,et al.  Development of an integrated dynamic thermal bridging assessment environment , 2003 .

[68]  Jan Radon,et al.  Uncertainty Approaches for Hygrothermal Building Simulations— Drying of AAC in Hot and Humid Climates , 1995 .

[69]  Klaus Sedlbauer,et al.  Biological Growth on Stucco , 1995 .

[70]  Jerald D. Parker,et al.  Heating, Ventilating, and Air Conditioning: Analysis and Design , 1977 .