Pre-/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact

[1]  Liam Blunt,et al.  The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives , 2011 .

[2]  C. Biffi,et al.  Fiber laser microdrilling of titanium and its effect on material microstructure , 2011 .

[3]  C. Coddet,et al.  Laser surface texturing (LST) treatment before thermal spraying: A new process to improve the substrate-coating adherence , 2010 .

[4]  N. Serres,et al.  Microstructures and environmental assessment of metallic NiCrBSi coatings manufactured via hybrid plasma spray process , 2010 .

[5]  H. Liao,et al.  Ablation laser and heating laser combined to cold spraying , 2010 .

[6]  M. Brandt,et al.  Microscopic observation of laser glazed yttria-stabilized zirconia coatings , 2010 .

[7]  B. James,et al.  Effect of surface roughness parameters on thermally sprayed PEEK coatings , 2010 .

[8]  Chonggui Li,et al.  Laser remelting of plasma sprayed nanostructured Al2O3–TiO2 coatings at different laser power , 2010 .

[9]  Chonggui Li,et al.  Laser surface remelting of plasma-sprayed nanostructured Al2O3–13 wt%TiO2 coatings on magnesium alloy , 2010 .

[10]  N. Serres,et al.  Corrosion Behavior of NiCrBSi Alloy Coatings Manufactured Via in Situ Plasma Spray – Laser Re-Melting Process , 2010, International Thermal Spray Conference.

[11]  N. Serres,et al.  Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray Process , 2010, International Thermal Spray Conference.

[12]  H. Man,et al.  Laser surface microdrilling of Ti and laser gas nitrided Ti for enhancing fixation of dental implants , 2010 .

[13]  C. Moreau,et al.  Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment , 2010 .

[14]  M. Ramulu,et al.  Waterjet and Water-Air Jet Surface Processing of a Titanium Alloy: A Parametric Evaluation , 2010 .

[15]  Yoann Danlos.  Etude de l'association laser-projection thermique pour l'optimisation de revêtements , 2009 .

[16]  Massimiliano Barletta,et al.  Post-deposition laser treatment of plasma sprayed titania-hydroxyapatite functionally graded coatings , 2009 .

[17]  Josef Foldyna,et al.  Effects of pulsating water jet impact on aluminium surface , 2009 .

[18]  S. Lebaili,et al.  Alternative to chromium, a hard alloy powder NiCrBCSi (Fe) coatings thermally sprayed on 60CrMn4 steel. Phase and comportements , 2009 .

[19]  Jože Vižintin,et al.  Surface texturing by pulsed Nd:YAG laser , 2009 .

[20]  N. Serres,et al.  Dry coatings and ecodesign: Part. 2 — Tribological performances , 2009 .

[21]  N. Serres,et al.  Dry coatings and ecodesign part. 1 — Environmental performances and chemical properties , 2009 .

[22]  S. Sedky,et al.  Excimer laser surface treatment of plasma sprayed alumina–13% titania coatings , 2009 .

[23]  William O’Neill,et al.  The laser-assisted cold spray process and deposit characterisation , 2009 .

[24]  I. Etsion,et al.  Wear life and adhesion of solid lubricant films on laser-textured steel surfaces , 2009 .

[25]  J. Jiménez,et al.  Influence of the sandblasting on the subsurface microstructure of 316LVM stainless steel: Implications on the magnetic and mechanical properties , 2009 .

[26]  H. Liao,et al.  Microstructure and Mechanical Properties of Flame-Sprayed PEEK Coating Remelted by Laser Process , 2009, International Thermal Spray Conference.

[27]  J. Legoux,et al.  LCA Comparison of Electroplating and Other Thermal Spray Processes , 2009, International Thermal Spray Conference.

[28]  G. Bolelli.  Replacement of hard chromium plating by thermal spraying – problems, solutions and possible future approaches , 2009 .

[29]  M. Multigner,et al.  Interrogations on the sub-surface strain hardening of grit blasted Ti–6Al–4V alloy , 2009 .

[30]  J. Grum,et al.  Quality Improvement of Flame Sprayed, Heat Treated, and Remelted NiCrBSi Coatings , 2009 .

[31]  Ilaria Corni,et al.  Electrophoretic deposition of PEEK-nano alumina composite coatings on stainless steel , 2009 .

[32]  J. Jouvard,et al.  Optimisation of TA6V alloy surface laser texturing using an experimental design approach , 2008 .

[33]  L. Dubourg,et al.  Technological and scientific landscape of laser cladding process in 2007 , 2008 .

[34]  Jirasak Tharajak,et al.  Hardness, adhesion index and microstructure of PEEK coating on Al or Fe substrate by LVOF flame spray , 2008 .

[35]  H. Pokhmurska,et al.  Post-treatment of thermal spray coatings on magnesium , 2008 .

[36]  D. Eifler,et al.  Polyetheretherketone (PEEK) Coatings on Stainless Steel by Electrophoretic Deposition , 2008 .

[37]  Eckart Uhlmann,et al.  Pre-treatment by dry ice blasting for adhesive bonding , 2008, Prod. Eng..

[38]  Yi Wan,et al.  The effect of laser surface texturing on frictional performance of face seal , 2008 .

[39]  H. Liao,et al.  Surface preparation by using laser cleaning in thermal spray , 2008 .

[40]  Département de Mécanique Appliquée,et al.  Texturation de surface par laser sur un matériau hétérogène , 2007 .

[41]  E. Toyserkani,et al.  Cladding of WC–12 Co on low carbon steel using a pulsed Nd:YAG laser , 2007 .

[42]  H. Liao,et al.  Structures and tribological performances of PEEK (poly-ether-ether-ketone)-based coatings designed for tribological application , 2007 .

[43]  R. Oltra,et al.  Study of Aluminium Oxidation Induced by a Q-switched Nd:YAG Laser Treatment and Its Influence on the Adhesion Properties of a Plasma-Sprayed Alumina Coating , 2007, International Thermal Spray Conference.

[44]  Graham Rutterford,et al.  Micro-machining of metals, ceramics and polymers using nanosecond lasers , 2007 .

[45]  J. L. Cortizo,et al.  Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser , 2007 .

[46]  Philip J. Rae,et al.  The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response , 2007 .

[47]  A. A. Voevodin,et al.  Laser surface texturing for adaptive solid lubrication , 2006 .

[48]  F. Stott,et al.  Crack-free densification of ceramics by laser surface treatment , 2006 .

[49]  J. Iwaszko,et al.  Surface remelting treatment of plasma-sprayed Al2O3+ 13wt.% TiO2 coatings , 2006 .

[50]  M. Lima,et al.  Optimization of titanium cutting by factorial analysis of the pulsed Nd:YAG laser parameters , 2006 .

[51]  A. E. Diniz,et al.  Efficiency of the laser texturing on the adhesion of the coated twist drills , 2006 .

[52]  C. Coddet,et al.  Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates , 2006 .

[53]  P. Fauchais,et al.  Influence of stainless steel substrate preheating on surface topography and on millimeter- and micrometer-sized splat formation , 2006 .

[54]  H. Liao,et al.  Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate , 2006 .

[55]  H. Liao,et al.  Deposition of PEEK coatings using a combined flame spraying–laser remelting process , 2006 .

[56]  T. Zhai,et al.  Enhancement of fatigue and corrosion properties of pure Ti by sandblasting , 2006 .

[57]  G. Montavon,et al.  Life Cycle Assessment (LCA) of Thermal-Sprayed and Chromium Electroplated Coatings , 2006, International Thermal Spray Conference.

[58]  H. Liao,et al.  Effects of surface conditions on the flattening behavior of plasma sprayed Cu splats , 2006 .

[59]  R. Oltra,et al.  XPS and SIMS study of aluminium native oxide modifications induced by Q‐switched Nd:YAG laser treatment , 2006 .

[60]  A. Doraiswamy,et al.  Comparison of photostructural changes induced by continuous and pulsed laser in chalcogenide glass , 2006 .

[61]  S. Valette,et al.  C40E steel oxidation under CO2: Kinetics and reactional mechanism , 2006 .

[62]  C. Leinenbach,et al.  Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media. , 2006, Biomaterials.

[63]  A. K. Tyagi,et al.  Laser surface modification and characterization of air plasma sprayed alumina coatings , 2006 .

[64]  A. A. Syed,et al.  Influence of substrate surface conditions on the plasma sprayed ceramic and metallic particles flattening , 2005 .

[65]  Ian Lowndes,et al.  Particulates from mining operations: A review of sources, effects and regulations , 2005 .

[66]  C. Sutcliffe,et al.  Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications , 2005 .

[67]  Manuel F. M. Costa,et al.  Surface laser-glazing of plasma-sprayed thermal barrier coatings , 2005 .

[68]  J. R. García,et al.  Behaviour of laser treated Cr, Ni coatings in the oxidative atmosphere of a steam boiler , 2005 .

[69]  C. Li.  Effect of the Surface Adsorbates on the Morphology of Plasma-Sprayed Splats , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

[70]  Izhak Etsion,et al.  The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. , 2005 .

[71]  Shrikant V. Joshi,et al.  A statistical approach to determine process parameter impact in Nd : YAG laser drilling of IN718 and Ti-6Al-4V sheets , 2005 .

[72]  Mingwei Li,et al.  Transmission welding of carbon nanocomposites with direct-diode and Nd:YAG solid state lasers , 2004, SPIE LASE.

[73]  Pierre Fauchais,et al.  Understanding plasma spraying , 2004 .

[74]  M. Abreu,et al.  Methodologies for determining thermoplastic films optical parameters at 10.6 μm laser wavelength , 2004 .

[75]  G. Montavon,et al.  Evaluation of modifications induced on pore network and structure of partially stabilized zirconia manufactured by hybrid plasma spray process , 2004 .

[76]  F. H. Stott,et al.  Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials , 2004 .

[77]  K. Wang,et al.  A study on the laser marking process of stainless steel , 2003 .

[78]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[79]  G. Montavon,et al.  Modification of ceramic thermal spray deposit microstructures implementing in situ laser remelting , 2003 .

[80]  Keiji Tanaka,et al.  Photo-induced phenomena in chalcogenide glasses: subgap photon effects , 2003, Other Conferences.

[81]  H. Liao,et al.  Influence of surface laser cleaning combined with substrate preheating on the splat morphology , 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.

[82]  M. Laribi,et al.  Adhesion and residual stresses determination of thermally sprayed molybdenum on steel , 2003 .

[83]  A. Ohmori,et al.  Thermal diffusivity and erosion resistance of ZrO2–8 wt.% Y2O3 coatings prepared by a laser hybrid spraying technique , 2002 .

[84]  H. Liao,et al.  Friction and wear behavior of flame-sprayed PEEK coatings , 2002 .

[85]  Akira Ohmori,et al.  Microstructures of ZrO2-8wt.%Y2O3 coatings prepared by a plasma laser hybrid spraying technique , 2002 .

[86]  Shinya Sasaki,et al.  Microstructure and tribological characteristics of ZrO2–Y2O3 ceramic coatings deposited by laser-assisted plasma hybrid spraying , 2002 .

[87]  I. Etsion,et al.  A Laser Surface Textured Hydrostatic Mechanical Seal , 2002 .

[88]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[89]  V. Gupta,et al.  Biosorption of chromium(VI) from aqueous solutions by green algae Spirogyra species. , 2001, Water research.

[90]  A. Ohmori,et al.  The influence of surface roughness of sprayed zirconia coatings on laser treatment , 2001 .

[91]  A. K. Tyagi,et al.  Laser induced structural and microstructural transformations of plasma sprayed Al2O3 coatings , 2001 .

[92]  H. Liao,et al.  Mechanical Properties of Thermal Spray PEEK Coatings , 2001, International Thermal Spray Conference.

[93]  E. Mazur,et al.  Micromachining using ultrashort pulses from a laser oscillator , 2001 .

[94]  H. Liao,et al.  Characterization of flame-sprayed PEEK coatings by FTIR-ATR, DSC and acoustic microscopy , 2000 .

[95]  Arnold Tukker,et al.  Life cycle assessment as a tool in environmental impact assessment , 2000 .

[96]  E. Brooman.  Corrosion performance of environmentally acceptable alternatives to cadmium and chromium coatings: Chromium—Part II , 2000 .

[97]  Eugen Cicala,et al.  Grooving by Nd:YAG laser treatment , 2000 .

[98]  F. Stott,et al.  Flame-assisted laser surface treatment of refractory materials for crack-free densification , 2000 .

[99]  A. Ohmori,et al.  Microstructures and characterization of zirconia-yttria coatings formed in laser and hybrid spray process , 1999 .

[100]  G. Montavon,et al.  Surface preparation and thermal spray in a single step: The PROTAL process—Example of application for an aluminum-base substrate , 1999 .

[101]  Klaus Sokolowski-Tinten,et al.  Physical mechanisms of short-pulse laser ablation , 1999, Other Conferences.

[102]  Alain Villeneuve,et al.  As 2 S 3 photosensitivity by two-photon absorption: holographic gratings and self-written channel waveguides , 1998 .

[103]  J. Mcwhirter.  Extinction coefficient and skin depth of alkali metals from 10 to 1000 nm , 1997 .

[104]  B. Yilbas.  Parametric study to improve laser hole drilling process , 1997 .

[105]  J. W. Dini.  Laser surface modification offers promise for various coating processes and substrates , 1997 .

[106]  L. Codispoti.  The limits to growth , 1997, Nature.

[107]  J. Hanchi,et al.  Dry sliding friction and wear of short carbon-fiber-reinforced polyetheretherketone (PEEK) at elevated temperatures , 1997 .

[108]  Robert B. Heimann,et al.  Plasma-Spray Coating: Principles and Applications , 1996 .

[109]  Q. Xue,et al.  The effect of particle size of nanometer ZrO2 on the tribological behaviour of PEEK , 1996 .

[110]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[111]  R. Fabbro,et al.  Laser shock processing of materials, physical processes involved and examples of applications , 1996 .

[112]  Michael E. Graham,et al.  The replacement of electroplating , 1996 .

[113]  W. Arnold,et al.  Calculation and measurement of the ultrasonic signals generated by ablating material with a Q-switched pulse laser , 1996 .

[114]  Klaus Friedrich,et al.  On sliding friction and wear of PEEK and its composites , 1995 .

[115]  E. Schubert,et al.  Laser-surface processing of metals and ceramics for industrial applications , 1995 .

[116]  W. Steen.  Laser Material Processing , 1991 .

[117]  A. Buchman,et al.  Preadhesion treatment of thermoplastic adherends using excimer laser , 1991 .

[118]  P. Goglia,et al.  Laser texturing for low‐flying‐height media , 1991 .

[119]  A. Buchman,et al.  Preadhesion laser surface treatment of polycarbonate and polyetherimide , 1990 .

[120]  P. Molian.  Structural characterization of laser-processed molybdenum steel , 1983 .

[121]  R. C. Weast.  HANDBOOK OF CHEMISTRY AND PHYSICS, 49th ed , 1969 .

[122]  W. Marsden.  I and J , 2012 .

[123]  N. Serres,et al.  Corrosion properties of in situ laser remelted NiCrBSi coatings comparison with hard chromium coatings , 2011 .

[124]  H. Liao,et al.  Improvement of flame spraying PEEK coating characteristics using lasers , 2011 .

[125]  N. Serres,et al.  Combined plasma spray and in situ laser melting treatment of NiCrBSi powder , 2010 .

[126]  V. Havranek,et al.  Modification of poly(ether ether ketone) by ion irradiation , 2008 .

[127]  A. Soveja.  Modélisation du processus de texturation par faisceau laser : approches expérimentale et numérique , 2007 .

[128]  Hui Li.  Rôle d'une ablation laser in situ sur les propriétés mécaniques d'un revêtement élaboré par projection thermique , 2006 .

[129]  Vincent Barnier.  Etude de l’oxydation de l’aluminium induite par traitement laser Nd :YAG (1064 nm, 10 ns) : conséquences sur les propriétés d’adhérence d’un revêtement d’alumine élaboré par projection thermique , 2006 .

[130]  H. Liao,et al.  LASER HYBRID PLASMA SPRAY PROCESSES: TOOLS TO ADJUST COATING STRUCTURAL CHARACTERISTICS , 2006 .

[131]  G. Montavon,et al.  Modification of thermal barrier coating architecture by in situ laser remelting , 2006 .

[132]  I. Etsion.  State of the art in Laser Surface Texturing , 2004 .

[133]  T. Ramachandra,et al.  BIOSORPTION OF HEAVY METALS , 2003 .

[134]  Wolfgang Schulz,et al.  Laser machining by short and ultrashort pulses, state of the art , 2002 .

[135]  J. Ready.  LIA handbook of Laser materials processing , 2001 .

[136]  F. Stott,et al.  Characteristics of the microstructures of alumina-based refractory materials treated with CO2 and diode lasers , 1999 .

[137]  P. Laurens,et al.  Modifications of polyether-etherketone surface after 193 nm and 248 nm excimer laser radiation , 1999 .

[138]  Tongxi Yu,et al.  Improvement of adhesive bonding in aluminium alloys using a laser surface texturing process , 1997 .

[139]  S. Sasaki.  Tribological properties of coating films synthesised by laser assisted plasma spraying , 1997 .

[140]  E. Brooman,et al.  Proceedings of the Symposium on Environmental Aspects of Electrochemical Technology: applications in electronics , 1997 .

[141]  D. Bäuerle.  Laser Processing and Chemistry , 1996 .

[142]  E. W. Brooman,et al.  Alternatives to cadmium coatings for electrical/electronic applications , 1993 .

[143]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[144]  R. C. Weast.  Handbook of chemistry and physics , 1972 .

[145]  M. Boll.  Cours de chimie , 1920 .

[146]  and as an in , 2022 .