Multi-criterion optimization of a biologically-produced nanofluid flow inside tubes fitted with coaxial twisted tape based on first and second law viewpoints
暂无分享,去创建一个
[1] A. Mwesigye,et al. Two-phase simulation of irreversibilities for Ag–water nanofluid flow inside an elliptical pin-fin heat sink: Entropy generation and exergy considerations , 2022, Powder Technology.
[2] S. Khanmohammadi,et al. Two-phase simulation of the generated entropy for the nanofluid flow inside a ribbed passage for cooling of a PV cell , 2022, Thermal Science and Engineering Progress.
[3] V. Ozceyhan,et al. A comprehensive second law analysis for a heat exchanger tube equipped with the rod inserted straight and twisted tape and using water/CuO nanofluid , 2022, International Journal of Thermal Sciences.
[4] J. Tu,et al. Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment , 2021, Applied Thermal Engineering.
[5] Jinli Zhang,et al. A comprehensive review of heat transfer enhancement and flow characteristics in the concentric pipe heat exchanger , 2021, Powder Technology.
[6] Mehdi Bahiraei,et al. Second law performance of a novel four-layer microchannel heat exchanger operating with nanofluid through a two-phase simulation , 2021, Powder Technology.
[7] J. Tu,et al. Numerical simulation of flow and heat transfer characteristics of nanofluids in built-in porous twisted tape tube , 2021 .
[8] J. Tu,et al. Numerical analysis of flow and heat characteristic around micro-ribbed tube in heat exchanger system , 2021, Powder Technology.
[9] M. Afrand,et al. Thermo-hydraulic performance of nanofluids in a bionic heat sink , 2021 .
[10] Mehdi Bahiraei,et al. Modeling of energy efficiency for a solar still fitted with thermoelectric modules by ANFIS and PSO-enhanced neural network: A nanofluid application , 2021 .
[11] Nima Mazaheri,et al. Application of an ecofriendly nanofluid containing graphene nanoplatelets inside a novel spiral liquid block for cooling of electronic processors , 2021 .
[12] Mehdi Bahiraei,et al. Predicting heat transfer rate of a ribbed triple-tube heat exchanger working with nanofluid using neural network enhanced by advanced optimization algorithms , 2020 .
[13] R. Ellahi,et al. Thermal and mechanical design of tangential hybrid microchannel and high-conductivity inserts for cooling of disk-shaped electronic components , 2020, Journal of Thermal Analysis and Calorimetry.
[14] S. Harish,et al. Enhanced heat transport behavior of micro channel heat sink with graphene based nanofluids , 2020 .
[15] A. Jafarzad,et al. Thermal and exergy analysis of air- nanofluid bubbly flow in a double-pipe heat exchanger , 2020 .
[16] Mehdi Bahiraei,et al. CFD analysis of second law characteristics for flow of a hybrid biological nanofluid under rotary motion of a twisted tape: Exergy destruction and entropy generation analyses , 2020 .
[17] M. Goodarzi,et al. Configuration and Optimization of a Minichannel Using Water–Alumina Nanofluid by Non-Dominated Sorting Genetic Algorithm and Response Surface Method , 2020, Nanomaterials.
[18] A. Talib,et al. Hybrid nanofluid flow and heat transfer over backward and forward steps: A review , 2020 .
[19] S. Khanmohammadi,et al. Second law analysis and multi-criteria optimization of turbulent heat transfer in a tube with inserted single and double twisted tape , 2019, International Journal of Thermal Sciences.
[20] M. Sarafraz,et al. Fluid and heat transfer characteristics of aqueous graphene nanoplatelet (GNP) nanofluid in a microchannel , 2019, International Communications in Heat and Mass Transfer.
[21] Omid Ali Akbari,et al. Effects of magnetic field on micro cross jet injection of dispersed nanoparticles in a microchannel , 2019, International Journal of Numerical Methods for Heat & Fluid Flow.
[22] E. Lakzian,et al. Entropy generation and exergy destruction in condensing steam flow through turbine blade with surface roughness , 2019, Energy Conversion and Management.
[23] Zhe Tian,et al. Efficiency assessment of using graphene nanoplatelets-silver/water nanofluids in microchannel heat sinks with different cross-sections for electronics cooling , 2019, International Journal of Numerical Methods for Heat & Fluid Flow.
[24] Arash Karimipour,et al. Simulation of water/FMWCNT nanofluid forced convection in a microchannel filled with porous material under slip velocity and temperature jump boundary conditions , 2019, International Journal of Numerical Methods for Heat & Fluid Flow.
[25] Omid Ali Akbari,et al. Heat Transfer of Oil/MWCNT Nanofluid Jet Injection Inside a Rectangular Microchannel , 2019, Symmetry.
[26] Mehdi Bahiraei,et al. Second law analysis of a hybrid nanofluid in tubes equipped with double twisted tape inserts , 2019, Powder Technology.
[27] Mehdi Bahiraei,et al. Application of a hybrid nanofluid containing graphene nanoplatelet–platinum composite powder in a triple-tube heat exchanger equipped with inserted ribs , 2019, Applied Thermal Engineering.
[28] S. Naidu,et al. A comparative study on the thermal performance of water in a circular tube with twisted tapes, perforated twisted tapes and perforated twisted tapes with alternate axis , 2019, International Journal of Thermal Sciences.
[29] M. Khoshvaght-Aliabadi,et al. Heat transfer intensification of agitated U-tube heat exchanger using twisted-tube and twisted-tape as passive techniques , 2018, Chemical Engineering and Processing - Process Intensification.
[30] S. Eiamsa-ard,et al. Convective heat transfer enhancement using Ag-water nanofluid in a micro-fin tube combined with non-uniform twisted tape , 2018, International Journal of Mechanical Sciences.
[31] Chang-qi Yan,et al. Numerical analysis on enhanced performance of new coaxial cross twisted tapes for laminar convective heat transfer , 2018, International Journal of Heat and Mass Transfer.
[32] Siyuan Mei,et al. Effect of rotating twisted tape on thermo-hydraulic performances of nanofluids in heat-exchanger systems , 2018, Energy Conversion and Management.
[33] S. Khanmohammadi,et al. Thermoeconomic modeling and multi-objective evolutionary-based optimization of a modified transcritical CO2 refrigeration cycle , 2018 .
[34] Mohammad Hossein Ahmadi,et al. Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe , 2018 .
[35] Tabish Alam,et al. A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications , 2018 .
[36] G. Ahmadi,et al. A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties. , 2018, Journal of colloid and interface science.
[37] Omid Ali Akbari,et al. The effect of attack angle of triangular ribs on heat transfer of nanofluids in a microchannel , 2018, Journal of Thermal Analysis and Calorimetry.
[38] Saeed Heshmatian,et al. Efficacy of a novel liquid block working with a nanofluid containing graphene nanoplatelets decorated with silver nanoparticles compared with conventional CPU coolers , 2017 .
[39] S. Harish,et al. Overall heat transfer coefficient improvement of an automobile radiator with graphene based suspensions , 2017 .
[40] A. H. Isfahani,et al. Empirical analysis of heat transfer and friction factor of water/graphene oxide nanofluid flow in turbulent regime through an isothermal pipe , 2017 .
[41] A. Rashidi,et al. Investigation of Fe3O4/Graphene nanohybrid heat transfer properties: Experimental approach , 2017 .
[42] Omid Ali Akbari,et al. Heat transfer improvement of water/single-wall carbon nanotubes (SWCNT) nanofluid in a novel design of a truncated double-layered microchannel heat sink , 2017 .
[43] Saman Rashidi,et al. Thermo-fluid performance and entropy generation analysis for a new eccentric helical screw tape insert in a 3D tube , 2017 .
[44] M. Taghilou,et al. On the multi-objective optimization of finned air-cooling heat exchanger: Nano-fluid effects , 2016 .
[45] Varun,et al. Heat transfer augmentation using twisted tape inserts: A review , 2016 .
[46] Josua P. Meyer,et al. Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts , 2016 .
[47] Davood Domiri Ganji,et al. Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices , 2015 .
[48] Hsiang-Wen Tang,et al. Numerical simulation and optimization of turbulent nanofluids in a three-dimensional rectangular rib-grooved channel , 2015 .
[49] Mehdi Bahiraei,et al. A Comprehensive Review on Different Numerical Approaches for Simulation in Nanofluids: Traditional and Novel Techniques , 2014 .
[50] Pongjet Promvonge,et al. Heat transfer augmentation in a helical-ribbed tube with double twisted tape inserts ☆ , 2012 .
[51] Chinaruk Thianpong,et al. Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes , 2010 .
[52] Ali Akbar Jamali,et al. Inverse modelling of multi-objective thermodynamically optimized turbojet engines using GMDH-type neural networks and evolutionary algorithms , 2005 .
[53] H. Herwig,et al. Entropy production calculation for turbulent shear flows and their implementation in cfd codes , 2005 .