C6H5NH2 effect on the corrosion inhibition of aluminium in 0.5 M HCl

In this paper, C6H6NH2 (aniline) effect on the corrosion of aluminium in 0.5 M (i.e. mol/L) HCl medium was studied using gravimetric method by weight loss measurements and electrochemical technique of corrosion potential and potentiodynamic polarization by cyclic voltamery (CV) instrumentation. By these techniques, corrosion rate obtained from aluminium specimens, in 0.5 HCl test-solution having different concentrations of the hydrogen-containing C6H6NH2 chemical, were requisitely analysed. Results showed that the potentiodynamic corrosion rate excellently correlated (R = 98.94%, Nash-Sutcliffe efficiency = 97.89% and ANOVA p-value = 0.0314) with function of the gravimetric corrosion rate and C6H5NH2 concentration. Both experimental and correlated prediction models identified 0.043 mol/L C6H5NH2 with optimal inhibition efficiency performance I· = 84.11% by the experimental or I· = 81.15% by the predicted models. Fittings of experimental and correlated data showed the data models followed the Langmuir adsorption isotherm from which favourable adsorption and prevalent physisorption were indicated as the C6H5NH2 corrosion-protection on aluminium metal in the 0.5 M HCl medium.

[1]  J. Okeniyi,et al.  Effects of Phyllanthus muellerianus Leaf-Extract on Steel-Reinforcement Corrosion in 3.5% NaCl-Immersed Concrete , 2016 .

[2]  J. Okeniyi,et al.  Performance of Terminalia catappa on mild steel corrosion in HCl medium , 2016 .

[3]  K. Bordo,et al.  Accelerated growth of oxide film on aluminium alloys under steam: Part II: Effects of alloy chemistry and steam vapour pressure on corrosion and adhesion performance , 2015 .

[4]  Joshua Olusegun Okeniyi,et al.  Inhibition and compressive-strength performance of Na2Cr2O7 and C10H14N2Na2O8·2H2O in steel-reinforced concrete in corrosive environments , 2015 .

[5]  J. Okeniyi,et al.  Corrosion Rate and Noise Resistance Correlation from NaNO2-Admixed Steel-Reinforced Concrete , 2015 .

[6]  J. Okeniyi,et al.  Modelling Rhizophora Mangle L Bark‐Extract Effects on Concrete Steel‐Rebar in 0.5 M H2SO4: Implications on Concentration for Effective Corrosion‐Inhibition , 2015 .

[7]  J. Okeniyi,et al.  Corrosion Inhibition of Concrete Steel-Reinforcement in Saline/Marine Simulating-Environment by Rhizophora mangle L. , 2015 .

[8]  Emeka Emanuel Oguzie,et al.  Theoretical and experimental studies on the corrosion inhibition potentials of some purines for aluminum in 0.1 M HCl , 2014, Journal of advanced research.

[9]  K. Krishnaveni,et al.  Effect of aqueous extract of leaves of Morinda tinctoria on corrosion inhibition of aluminium surface in HCl medium , 2014 .

[10]  J. Okeniyi,et al.  Electrochemical Performance of Phyllanthus Muellerianus on the Corrosion of Concrete Steel-reinforcement in Industrial/Microbial Simulating-environment , 2014 .

[11]  O. M. Omoniyi,et al.  Probability density fittings of corrosion test-data: Implications on C6H15NO3 effectiveness on concrete steel-rebar corrosion , 2014 .

[12]  J. Okeniyi,et al.  Electrochemical Performance of Anthocleista djalonensis on Steel-Reinforcement Corrosion in Concrete Immersed in Saline/Marine Simulating-Environment , 2014, Transactions of the Indian Institute of Metals.

[13]  A. Sharma,et al.  Inhibition of Corrosion of Aluminium in Potassium Hydroxide Solution by Pyridine Derivatives , 2014 .

[14]  Joshua Olusegun Okeniyi,et al.  Rhizophora mangle L. effects on steel-reinforced concrete in 0.5 M H2SO4: Implications for corrosion-degradation of wind-energy structures in industrial environments , 2014 .

[15]  Joshua Olusegun Okeniyi,et al.  Analysis of inhibition of concrete steel-rebar corrosion by Na2Cr2O7 concentrations: Implications for conflicting reports on inhibitor effectiveness , 2013 .

[16]  P. Rao,et al.  Coriandrum sativum L.—A novel green inhibitor for the corrosion inhibition of aluminium in 1.0 M phosphoric acid solution , 2013 .

[17]  M. Deyab.  Hydrogen generation during the corrosion of carbon steel in crotonic acid and using some organic surfactants to control hydrogen evolution , 2013 .

[18]  M. Oki,et al.  Corrosion Inhibition of Aluminium in HCl by Amine Modified Epoxy Resin , 2013 .

[19]  E. A. A. Aal,et al.  Factors affecting the corrosion behaviour of aluminium in acid solutions. II. Inorganic additives as corrosion inhibitors for Al in HCl solutions , 2013 .

[20]  Siobhán Dorai-Raj,et al.  Modeling of Pathogen Indicator Organisms in a Small-Scale Agricultural Catchment Using SWAT , 2013 .

[21]  A. N. Shetty,et al.  Influence of 2-(4-chlorophenyl)-2-oxoethyl benzoate on the hydrogen evolution and corrosion inhibition of 18 Ni 250 grade weld aged maraging steel in 1.0 M sulfuric acid medium , 2012 .

[22]  O. Omotosho,et al.  Investigating the Acid Failure of Aluminium Alloy in 2 M Hydrochloric Acid Using Vernonia amygdalina , 2012 .

[23]  J. Okeniyi,et al.  Modelling the Performance of Sodium Nitrite and Aniline as Inhibitors in the Corrosion of Steel-reinforced Concrete , 2012 .

[24]  V. D. Alva,et al.  A Study of Aluminium Corrosion Inhibition in Acid Medium by an Antiemitic Drug , 2011 .

[25]  A. El-Meligi.  Hydrogen production by aluminum corrosion in hydrochloric acid and using inhibitors to control hydro , 2011 .

[26]  N. F. Atta,et al.  Corrosion inhibition, hydrogen evolution and antibacterial properties of newly synthesized organic i , 2011 .

[27]  A. Fekry,et al.  Inhibition effect of newly synthesized heterocyclic organic molecules on corrosion of steel in alkaline medium containing chloride , 2010 .

[28]  K. Y. Foo,et al.  Insights into the modeling of adsorption isotherm systems , 2010 .

[29]  S. Papavinasam.  3 – Electrochemical polarization techniques for corrosion monitoring , 2008 .