Retrieval of forest structural parameters using a ground-based lidar instrument (Echidna®)

A prototype upward-scanning, under-canopy, near-infrared light detection and ranging (lidar) system, the Echidna® validation instrument (EVI), built by CSIRO Australia, retrieves forest stand structural parameters, including mean diameter at breast height (DBH), stand height, distance to tree, stem count density (stems/area), leaf-area index (LAI), and stand foliage profile (LAI with height) with very good accuracy in early trials. We validated retrievals with ground-truth data collected from two sites near Tumbarumba, New South Wales, Australia. In a ponderosa pine plantation, LAI values of 1.84 and 2.18 retrieved by two different methods using a single EVI scan bracketed a value of 1.98 estimated by allometric equations. In a natural, but managed, Eucalypus stand, eight scans provided mean LAI values of 2.28–2.47, depending on the method, which compare favorably with a value of 2.4 from hemispherical photography. The retrieved foliage profile clearly showed two canopy layers. A “find-trunks” algorithm processed the EVI scans at both sites to identify stems, determine their diameters, and measure their distances from the scan center. Distances were retrieved very accurately (r2 = 0.99). The accuracy of EVI diameter retrieval decreased somewhat with distance as a function of angular resolution of the instrument but remained unbiased. We estimated stand basal area, mean diameter, and stem count density using the Relaskop method of variable radius plot sampling and found agreement with manual Relaskop values within about 2% after correcting for the obscuring of far trunks by near trunks (occlusion). These early trials prove the potential of under-canopy, upward-scanning lidar to retrieve forest structural parameters quickly and accurately.

[1]  Lee A. Vierling,et al.  Use of a ground‐based scanning lidar for estimation of biophysical properties of western larch (Larix occidentalis) , 2007 .

[2]  K. Lim,et al.  Estimation of above ground forest biomass from airborne discrete return laser scanner data using canopy-based quantile estimators , 2004 .

[3]  David J. Harding,et al.  A portable LIDAR system for rapid determination of forest canopy structure , 2004 .

[4]  C. Woodcock,et al.  Estimating forest LAI profiles and structural parameters using a ground-based laser called 'Echidna'. , 2008, Tree physiology.

[5]  N. Breda.  Ground-based measurements of leaf area index: a review of methods, instruments and current controversies. , 2003, Journal of experimental botany.

[6]  D. Baldocchi,et al.  Estimation of leaf area index in open-canopy ponderosa pine forests at different successional stages and management regimes in Oregon , 2001 .

[7]  G. Campbell.  Extinction coefficients for radiation in plant canopies calculated using an ellipsoidal inclination angle distribution , 1986 .

[8]  J. F. Bell,et al.  Variable Probability Sampling: Variable Plot and Three-P , 1982 .

[9]  Jw Wilson.  Estimation of foliage denseness and foliage angle by inclined point quadrats , 1963 .

[10]  J. Means.  Use of Large-Footprint Scanning Airborne Lidar To Estimate Forest Stand Characteristics in the Western Cascades of Oregon , 1999 .

[11]  B. Bonan,et al.  A Land Surface Model (LSM Version 1.0) for Ecological, Hydrological, and Atmospheric Studies: Technical Description and User's Guide , 1996 .

[12]  P. Radtke,et al.  Detailed Stem Measurements of Standing Trees from Ground-Based Scanning Lidar , 2006, Forest Science.

[13]  Philip J. Radtke,et al.  Laser point-quadrat sampling for estimating foliage-height profiles in broad-leaved forests , 2001 .

[14]  I. Jonckheere,et al.  Influence of measurement set-up of ground-based LiDAR for derivation of tree structure , 2006 .

[15]  Jing M. Chen,et al.  Quantifying the effect of canopy architecture on optical measurements of leaf area index using two gap size analysis methods , 1995, IEEE Trans. Geosci. Remote. Sens..

[16]  R. Lacaze,et al.  Multi-angular optical remote sensing for assessing vegetation structure and carbon absorption , 2003 .

[17]  P Holgate,et al.  The angle-count method. , 1967, Biometrika.

[18]  N. Coops,et al.  Using airborne and ground-based ranging lidar to measure canopy structure in Australian forests , 2003 .

[19]  M. Flood,et al.  LiDAR remote sensing of forest structure , 2003 .

[20]  P. Gessler,et al.  Regression modeling and mapping of coniferous forest basal area and tree density from discrete-return lidar and multispectral satellite data , 2006 .

[21]  J. Cihlar,et al.  Plant canopy gap-size analysis theory for improving optical measurements of leaf-area index. , 1995, Applied optics.

[22]  R. Leuning,et al.  Carbon and water fluxes over a temperate Eucalyptus forest and a tropical wet/dry savanna in Australia: measurements and comparison with MODIS remote sensing estimates , 2005 .

[23]  H. Mooney,et al.  Modeling the Exchanges of Energy, Water, and Carbon Between Continents and the Atmosphere , 1997, Science.

[24]  C. Woodcock,et al.  Modeling the hemispherical scanning, below-canopy lidar and vegetation structure characteristics with a geometric-optical and radiative-transfer model , 2008 .

[25]  A. Lang.  Simplified estimate of leaf area index from transmittance of the sun's beam , 1987 .

[26]  C. Hopkinson,et al.  Assessing forest metrics with a ground-based scanning lidar , 2004 .

[27]  W. Walker,et al.  Mapping forest structure for wildlife habitat analysis using multi-sensor (LiDAR, SAR/InSAR, ETM+, Quickbird) synergy , 2006 .

[28]  J. Chen,et al.  Evaluation of hemispherical photography for determining plant area index and geometry of a forest stand , 1991 .

[29]  A.R.G. Lang,et al.  Application of some of Cauchy's theorems to estimation of surface areas of leaves, needles and branches of plants, and light transmittance , 1991 .

[30]  J. Blair,et al.  The Laser Vegetation Imaging Sensor: a medium-altitude, digitisation-only, airborne laser altimeter for mapping vegetation and topography , 1999 .

[31]  Pete Watt,et al.  Measuring forest structure with terrestrial laser scanning , 2005 .

[32]  J. Welles,et al.  Canopy structure measurement by gap fraction analysis using commercial instrumentation , 1996 .

[33]  J. Ross.  The radiation regime and architecture of plant stands , 1981, Tasks for vegetation sciences 3.