Influence of performance criteria on the selection of electric traction equipment and a temperature control system for a battery-powered vehicle with an electric traction drive

Abstract The paper deals with the main aspects of the selection of electric traction equipment and a temperature control system for the traction battery of a wheeled vehicle. We propose a computational and analytical method for determining the operating parameters of the main systems of a battery-powered vehicle with an electric traction drive. The cycles of motion of various complexity were considered and analyzed. Based on the analysis, an equivalent loading cycle was obtained. We also took a statistical sample of such basic parameters of the studied vehicle as current consumption, torque, and speed of the electric traction motor (ETM). The paper presents the main relationships between the studied vehicle parameters and the motion cycle. During the calculations, the main operation features in each of the studied systems were distinguished. Besides, we offer recommendations on the selection of electric traction equipment taking into account the technical requirements and basic operating conditions of vehicles.

[1]  Igor Chernyaev,et al.  Methods for continuous monitoring of compliance of vehicles’ technical condition with safety requirements during operation , 2020 .

[2]  Igor Ivanov,et al.  Digital platform and ecosystem for providing regional transport mobility , 2020 .

[3]  Alexey Marusin,et al.  A method for assessing the influence of automated traffic enforcement system parameters on traffic safety , 2018 .

[4]  Vladislav Dygalo,et al.  Monitoring of vehicles’ active safety systems in operation , 2020 .

[5]  David Cebon,et al.  Technoeconomic Analysis of Charging and Heating Options for an Electric Bus Service in London , 2019, IEEE Transactions on Transportation Electrification.

[6]  S. Evtiukov,et al.  Smart Transport in road transport infrastructure , 2020, IOP Conference Series: Materials Science and Engineering.

[7]  S. Evtiukov,et al.  POTENTIAL FOR IMPROVING THE PROCEDURE OF INSPECTING ROAD TRAFFIC ACCIDENT BLACK SPOTS , 2020 .

[8]  Ravinder Kumar,et al.  Numerical investigation on cooling performance of Li-ion battery thermal management system at high galvanostatic discharge , 2018, Engineering Science and Technology, an International Journal.

[9]  Lars Schnieder,et al.  Simulation Based Studies on the Integration of Battery-Electric Vehicles in Regional Bus Services , 2015, 2015 IEEE 18th International Conference on Intelligent Transportation Systems.

[10]  Chengyi Song,et al.  Temperature effect and thermal impact in lithium-ion batteries: A review , 2018, Progress in Natural Science: Materials International.

[11]  Xuezhe Wei,et al.  Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review , 2019, Electrochemical Energy Reviews.

[12]  V. Filatov,et al.  Simulation of the Heat Current Limitation Algorithm for the Traction Battery Management System , 2021, 2021 Systems of Signals Generating and Processing in the Field of on Board Communications.

[13]  Valery Lukinskiy,et al.  Concept of Quantitative Assessment of Knowledge Uncertainty in Accident Reconstruction Tasks , 2017 .

[14]  Arun Mambazhasseri Divakaran,et al.  Design, Development and Thermal Analysis of Reusable Li-Ion Battery Module for Future Mobile and Stationary Applications , 2020 .

[15]  Zonghai Chen,et al.  Model-based State-of-energy Estimation of Lithium-ion Batteries in Electric Vehicles , 2016 .

[16]  A. Kapustin,et al.  Study of braking energy recovery impact on cost-efficiency and environmental safety of vehicle , 2020 .

[17]  V. Shepelev,et al.  Reduction of environmental impact from road transport using analysis and simulation methods , 2020 .

[18]  A I Petrov,et al.  Statistical Modelling of Orderliness of Regional Road Safety Provision Systems , 2019 .

[19]  Ivan Uspensky,et al.  DEVELOPMENT OF THE MATHEMATICAL MODEL OF FUEL EQUIPMENT AND JUSTIFICATION FOR DIAGNOSING DIESEL ENGINES BY INJECTOR NEEDLE DISPLACEMENT , 2020 .

[20]  S. A. Evtyukov,et al.  The Rationalization of Parameters of the Sucion Intake Device for Packed Bulk Construcion Materials , 2014 .

[21]  Mukhtar Kerimov,et al.  Model of multi-level system managing automated traffic enforcement facilities recording traffic violations , 2020 .

[22]  Ilya Brylev,et al.  Problems of calculating the speed of two-wheeled motor vehicles in an accident , 2018 .

[23]  Aleksandr Marusin,et al.  CDF simulation-based research of influence of mechanical defects in nozzles on environmental parameters of automotive diesel engines , 2020 .

[24]  Sergej Repin,et al.  Theoretical Study on the Stressed State of the Disc-Shaped Cohesive Bulk Material , 2013 .

[25]  M. Sharov.  Reliability as index of formation of sustainable urban passenger transport system, exemplified by cities in Russian Federation , 2020 .

[26]  M. Z. Khostikoev,et al.  Hole Restoration in situ Using a Mobile Machine Tool, without Disassembly , 2019 .

[27]  Yuliia I. Lobanova,et al.  Role and methods of accident ability diagnosis in ensuring traffic safety , 2020 .

[28]  Aleksandr Marusin,et al.  Improving safety of using ambulance vehicles in large cities , 2020 .

[29]  I. Malygin,et al.  Areas of focus in ensuring the environmental safety of motor transport , 2020 .

[30]  S. Vorobiev,et al.  Method for improving the safety of diesel vehicles when operating on gas engine fuel (gas diesel engines) , 2020 .

[31]  Ravil Safiullin,et al.  Method to evaluate performance of measurement equipment in automated vehicle traffic control systems , 2020 .

[32]  Daniel H. Doughty,et al.  A General Discussion of Li Ion Battery Safety , 2012 .

[33]  Igor Danilov,et al.  ANALYSIS AND VALIDATION OF THE DYNAMIC METHOD FOR DIAGNOSING DIESEL ENGINE CONNECTING ROD BEARINGS , 2018 .

[34]  Kari Tammi,et al.  City Bus Powertrain Comparison: Driving Cycle Variation and Passenger Load Sensitivity Analysis , 2018, Energies.

[35]  M. Z. Khostikoev,et al.  Improving the Performance of Multipurpose Machine Tools , 2019 .

[36]  Aleksandr Belyaev,et al.  Mathematical model for selecting the best technology for restoring road construction machines , 2020, E3S Web of Conferences.

[37]  N. Omar,et al.  Comparative Study of Surface Temperature Behavior of Commercial Li-Ion Pouch Cells of Different Chemistries and Capacities by Infrared Thermography , 2015 .

[38]  Yavor Ivanov,et al.  A STUDY OF THE FUEL CONSUMPTION OF HYBRID CAR TOYOTA YARIS , 2019, Transport Problems.

[39]  S. A. Evtyukov,et al.  Improved Technology of Reinforcement Works and Technical Substantiation of Reinforcement Bar Oscillation Cutting , 2014 .

[40]  Igor Danilov,et al.  Intelligent driver assistance systems as factor of transportation safety assurance , 2020 .

[41]  Mariya Karelina,et al.  A method for multi-criteria evaluation of the complex safety characteristic of a road vehicle , 2018 .

[42]  Mark Ferguson,et al.  Simulation of electric buses on a full transit network: Operational feasibility and grid impact analysis , 2017 .

[43]  Grigory Ginzburg,et al.  SYSTEMIC INDICATORS OF ROAD INFRASTRUCTURE AT ACCIDENT CLUSTERS , 2020 .

[44]  Mukhtar Kerimov,et al.  Methodological aspects of building mathematical model to evaluate efficiency of automated vehicle traffic control systems , 2020 .