Efficiency Enhancement of Cu(In,Ga)Se2 Solar Cells by Applying SiO2–PEG/PVP Antireflection Coatings

An effective approach was presented to enhance photoelectric conversion efficiency of Cu(In,Ga)Se2 (CIGS) solar cells by using modified SiO2 antireflection coatings (ARCs) to harvest more incident sunlight. Polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) used as additives were introduced into silica sols to prepare SiO2–PEG and SiO2–PVP coatings in the sol–gel dip-coating process, respectively. The different effects of PEG and PVP additives on SiO2 coatings were analyzed and the antireflection performance of SiO2–PEG and SiO2–PVP coatings was investigated. The transmittance over 97% ranging from 450 nm to 700 nm with a maximum transmittance over 99.40% at about 550 nm was achieved for both SiO2–PEG2000A and SiO2–PVP0.5 coatings. The relative efficiencies of CIGS solar cells coated with SiO2–PEG2000A and SiO2–PVP0.5 ARCs were increased by 7.27% and 8.33%, respectively. The modified SiO2 ARCs possessed the advantages of the low manufacturing cost, good adhesion, superior antireflective performance and the feasible method for large area fabrication.

[1]  Tianquan Lin,et al.  A facile preparation route for boron-doped graphene, and its CdTe solar cell application , 2011 .

[2]  H. Kuo,et al.  Enhanced broadband and omnidirectional performance of Cu(In,Ga)Se2 solar cells with ZnO functional nanotree arrays. , 2013, Nanoscale.

[3]  Shangjun Ding,et al.  Sol–gel preparation and characterization of nanoporous ZnO/SiO2 coatings with broadband antireflection properties , 2011 .

[4]  P. Yu,et al.  Angle-resolved characteristics of silicon photovoltaics with passivated conical-frustum nanostructures , 2011 .

[5]  Y. Xu,et al.  Comparision of Silica Anti-Reflective Films Obtained via a Sol-Gel Process in the Presence of PEG or PVP , 2012 .

[6]  Jun Shen,et al.  Ultrafast coloring-bleaching performance of nanoporous WO3-SiO2 gasochromic films doped with Pd catalyst. , 2011, ACS applied materials & interfaces.

[7]  D. Partlow,et al.  Formation of broad band antireflective coatings on fused silica for high power laser applications , 1985 .

[8]  S. Chu,et al.  Effects of substrate temperature on the properties of transparent conducting AZO thin films and CIGS solar cells , 2013 .

[9]  Hao-Chung Kuo,et al.  Antireflection and light trapping of subwavelength surface structures formed by colloidal lithography on thin film solar cells , 2012 .

[10]  D. Hariskos,et al.  New world record efficiency for Cu(In,Ga)Se2 thin‐film solar cells beyond 20% , 2011 .

[11]  M. P. Brungs,et al.  Sol-Gel Processing by Aging and Pore Creator Addition for Porous Silica Antireflective Coatings , 2002 .

[12]  I. Repins,et al.  19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor , 2008 .

[13]  L. Cheng,et al.  Preparation of organic–inorganic nano-composites for antireflection coatings , 2008 .

[14]  Bryce S. Richards,et al.  Comparison of TiO2 and other dielectric coatings for buried‐contact solar cells: a review , 2004 .

[15]  Ananth Dodabalapur,et al.  Synthesis of CulnS2, CulnSe2, and Cu(InxGa(1-x))Se2 (CIGS) nanocrystal "inks" for printable photovoltaics. , 2008, Journal of the American Chemical Society.

[16]  Lih-Juann Chen,et al.  Large scale single-crystal Cu(In,Ga)Se2 nanotip arrays for high efficiency solar cell. , 2011, Nano letters.

[17]  Á. Morales,et al.  Silica antireflective films on glass produced by the sol-gel method , 2003 .

[18]  Fuqiang Huang,et al.  Broadband antireflection TiO2–SiO2 stack coatings with refractive-index-grade structure and their applications to Cu(In,Ga)Se2 solar cells , 2014 .

[19]  Fangfang Xu,et al.  Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications , 2010 .

[20]  L. Arzel,et al.  Study of the electronic properties of wide band gap CIGSe solar cells: Influence of copper off-stoichiometry , 2012 .

[21]  Lei Zhang,et al.  Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar Cells , 2012 .

[22]  Michael D. McGehee,et al.  Materials science: Fast-track solar cells , 2013, Nature.

[23]  Chuan Yi Tang,et al.  A 2.|E|-Bit Distributed Algorithm for the Directed Euler Trail Problem , 1993, Inf. Process. Lett..

[24]  Yuhan Sun,et al.  Sol-gel broadband anti-reflective single-layer silica films with high laser damage threshold , 2003 .

[25]  Se Jin Park,et al.  Solution processed high band‐gap CuInGaS2 thin film for solar cell applications , 2014 .

[26]  Edward H. Sargent,et al.  Materials interface engineering for solution-processed photovoltaics , 2012, Nature.

[27]  A. Majumdar,et al.  Opportunities and challenges for a sustainable energy future , 2012, Nature.

[28]  M. Green,et al.  Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route , 2014 .

[29]  Copper indium gallium selenide (CIGS) photovoltaic devices made using multistep selenization of nanocrystal films. , 2013, ACS applied materials & interfaces.

[30]  C. Pan,et al.  Improved broadband and quasi-omnidirectional anti-reflection properties with biomimetic silicon nanostructures. , 2007, Nature nanotechnology.

[31]  Kyung-Eun Park,et al.  Effects of ZnO:Al films on CIGS PV modules degraded under accelerated damp heat , 2012 .

[32]  H. Kuo,et al.  Non-antireflective scheme for efficiency enhancement of Cu(In,Ga)Se2 nanotip array solar cells. , 2013, ACS nano.

[33]  Xiujian Zhao,et al.  Electrodeposited and selenized CIGS thin films for solar cells , 2008 .