Machining accuracy improvement and mode coupling chatter avoidance in robotic milling

[1]  Shin-ichi Matsuoka,et al.  High-speed end milling of an articulated robot and its characteristics , 1999 .

[2]  Yonghua Chen,et al.  A robotic system for rapid prototyping , 1997, Proceedings of International Conference on Robotics and Automation.

[3]  Eberhard Abele,et al.  Increasing the accuracy of a milling industrial robot , 2006 .

[4]  Hui Zhang,et al.  Improving machining accuracy with robot deformation compensation , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Yasuo Yamane,et al.  Application of multi-joint type industrial robot to scraping of surface plate. , 1989 .

[6]  Santiago Garrido,et al.  Accuracy and Calibration Issues of Industrial Manipulators , 2006 .

[7]  Hong Jae Yim,et al.  Error Compensation of a Large Scale LCD Glass Transfer Robot , 2008 .

[8]  Shreyes N. Melkote,et al.  A Model Based Computationally Efficient Method for On-Line Detection of Chatter in Milling , 2013 .

[9]  Yoshimi Takeuchi,et al.  Automation of Polishing Work by an Industrial Robot : System of Polishing Robot , 1993 .

[10]  Alessandro Gasparetto,et al.  Eigenvalue Analysis of Mode-Coupling Chatter for Machine-Tool Stabilization , 2001 .

[11]  Min Ki Lee.  Design of a high stiffness machining robot arm using double parallel mechanisms , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[12]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[13]  M Vukobratović,et al.  Deflection compensation for large flexible manipulators , 1996 .

[14]  Zengxi Pan,et al.  Machining with flexible manipulator: toward improving robotic machining performance , 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

[15]  Jon Rigelsford,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2004 .

[16]  Lutfi Taner Tunc,et al.  Investigation of the effects of Stewart platform-type industrial robot on stability of robotic milling , 2016 .

[17]  Pascal Ray,et al.  Dynamic characterization of machining robot and stability analysis , 2016 .

[18]  Makoto Jinno,et al.  Development of a force controlled robot for grinding, chamfering and polishing , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[19]  Eberhard Abele,et al.  Cartesian compliance model for industrial robots using virtual joints , 2008, Prod. Eng..

[20]  Yanmei Li,et al.  A review of modeling of soft-contact fingers and stiffness control for dextrous manipulation in robotics , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[21]  Imin Kao,et al.  Stiffness control and transformation for robotic systems with coordinate and non-coordinate bases , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[22]  J. Bauer,et al.  High speed cutting with industrial robots: Towards model based compensation of deviations , 2008 .

[23]  Yong Hu,et al.  Implementation of a Robot System for Sculptured Surface Cutting. Part 1. Rough Machining , 1999 .

[24]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part II: inserted cutters , 2001 .

[25]  Sébastien Briot,et al.  Elasto-Dynamic Model of Robotic Milling Process Considering Interaction Between Tool and Workpiece , 2012 .

[26]  Hui Zhang,et al.  Chatter analysis of robotic machining process , 2006 .

[27]  Takaaki Oiwa,et al.  Error Compensation System for Joints, Links and Machine Frame of Parallel Kinematics Machines , 2005, Int. J. Robotics Res..

[28]  Hui Zhang,et al.  Machining with Flexible Manipulators: Critical Issues and Solutions , 2006 .

[29]  John B. Morehouse,et al.  Thin-Film PVDF Sensor-Based Monitoring of Cutting Forces in Peripheral End Milling , 2012 .

[30]  Ulrich Schneider,et al.  Integrated approach to robotic machining with macro/micro-actuation , 2014 .

[31]  Tao Zhang,et al.  High-precision contour control of industrial robot arm by neural network compensation with learning uncertainties , 2001, ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No.01TH8570).

[32]  Alessandro Gasparetto,et al.  A System Theory Approach to Mode Coupling Chatter in Machining , 1998 .

[33]  Ismail Lazoglu,et al.  Sculpture surface machining: a generalized model of ball-end milling force system , 2003 .

[34]  H. G. Petersen,et al.  Advanced off-line simulation framework with deformation compensation for high speed machining with robot manipulators , 2012, 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[35]  Stéphane Caro,et al.  Joint stiffness identification of six-revolute industrial serial robots , 2011 .

[36]  Anders Robertsson,et al.  Increasing Time-Efficiency and Accuracy of Robotic Machining Processes Using Model-Based Adaptive Force Control , 2012, SyRoCo.

[37]  Imin Kao,et al.  Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and Fingers , 2000, Int. J. Robotics Res..

[38]  Robert A. Freeman,et al.  Synthesis of Actively Adjustable Springs by Antagonistic Redundant Actuation , 1992 .

[39]  Bijan Shirinzadeh,et al.  Enhanced stiffness modeling, identification and characterization for robot manipulators , 2005, IEEE Transactions on Robotics.

[40]  T. Nakagawa,et al.  Robot-polishing of curved surface with magnetically pressed polishing tool. , 1988 .

[41]  Stéphane Caro,et al.  Workpiece Placement Optimization of Six-Revolute Industrial Serial Robots for Machining Operations , 2012 .

[42]  S. Gruber,et al.  Robot hands and the mechanics of manipulation , 1987, Proceedings of the IEEE.

[43]  Yusuf Altintas,et al.  Mechanism of Cutting Force and Surface Generation in Dynamic Milling , 1991 .

[44]  Sébastien Briot,et al.  Compliance error compensation in robotic-based milling , 2014, ArXiv.

[45]  Klaus Weinert,et al.  Mechanistic identification of specific force coefficients for a general end mill , 2004 .

[46]  Benoît Furet,et al.  Workpiece placement optimization for machining operations with a KUKA KR270-2 robot , 2013, 2013 IEEE International Conference on Robotics and Automation.

[47]  Hui Zhang,et al.  Analysis and suppression of chatter in robotic machining process , 2007, 2007 International Conference on Control, Automation and Systems.

[48]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part I: helical end mills , 2001 .

[49]  Geir Hovland,et al.  Robotic face milling path correction and vibration reduction , 2015, 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

[50]  Dragan Milutinovic,et al.  A method for off-line compensation of cutting force-induced errors in robotic machining by tool path modification , 2014 .

[51]  Min-Yang Yang,et al.  The prediction of cutting force in ball-end milling , 1991 .

[52]  John W. Sutherland,et al.  An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems , 1986 .

[53]  J. Salisbury,et al.  Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[54]  Wan Kyun Chung,et al.  Stiffness analysis and control of redundant manipulators , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[55]  Peter Nyman,et al.  Implementing Multi-Touch Screen for real-time control of a robotic cell at Universidad Politécnica de Valencia , 2010 .

[56]  Alexandr Klimchik,et al.  Experimental study of robotic-based machining , 2016 .

[57]  Ulrich Schneider,et al.  Improving robotic machining accuracy through experimental error investigation and modular compensation , 2016 .

[58]  Benoît Furet,et al.  A methodology for joint stiffness identification of serial robots , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[59]  Inmin Kao,et al.  Properties of the Grasp Stiffness Matrix and Conservative Control Strategies , 1999, Int. J. Robotics Res..

[60]  Yonghua Chen,et al.  Robot machining: recent development and future research issues , 2013 .